Experimental Investigation of Low-Velocity Repeated Impacts on Glass Fiber Metal Composites

The aim of this study was to experimentally investigate the effect of repeated low-velocity impacts on tensile strength of fiber metal laminates (FMLs) using instrumented drop weight impact tester. FMLs were fabricated layer by layer intercalating three layers of aluminum 6061 and two layers of glass fiber-reinforced epoxy. The FMLs were subjected to repeated low-velocity impacts (<10?m/s) at the same location on the FML. The degradation of mechanical property due to impact(s) was studied using Zwick UTM at distances of 0, 20, 40, and 60?mm from the impact point. Results indicate that ultimate tensile strength, failure strain, and ductility of all specimens initially decrease, and then remain constant with increase in number of impacts. A closer examination of impacted FML by scanning electron microscope indicates that thinning and shear fracture in aluminum layers, as well as delamination, and fiber failure in composites plies were present.     

Bi2O3 modified cobalt hydroxide as an electrode for alkaline batteries

Manganese dioxide electrode shows reversible charge storage capacity, if the charge-discharge process is limited to 0.3e⁻ exchange. Addition of small amount of Bi₂O₃ to manganese dioxide induces reversibility with an exchange of 2e⁻/Mn. Nickel hydroxide is known to reversibly exchange 1e⁻. In spite of isostructural relationship between the cobalt hydroxide, nickel hydroxide and manganese dioxide, cobalt hydroxide does not show any electrochemical activity. Bi₂O₃ modified cobalt hydroxide electrodes exchanges 0.3-0.5e⁻/Co during the charge discharge process. The oxidation-reduction process in cobalt hydroxide and Bi₂O₃ modified cobalt hydroxide electrodes were monitored using the PXRD patterns.     

SOLID-STATE REACTION BETWEEN BARIUM SULFATE AND CARBON

Barium sulfate is the chief source for the manufacture of barium compounds, which have a wide range of applications in chemical industries. In the preparation of these compounds, the first step is the reaction between barium sulfate and carbon to produce barium sulfide. In the present work, the mechanism of reaction between barium sulfate and carbon is investigated experimentally, covering a wide range of temperatures, times of reaction, and stoichiometric ratios of reactants. The reaction is conducted in air, nitrogen, and vacuum. It is also studied using the reactants in pellet form to determine the effect of compaction pressure on rate of reaction. A model is developed to estimate the kinetic parameters and mechanism of the reaction. An attempt is also made to study the feasibility of conducting the reaction for continuous production of barium sulfide in a moving bed rector using the reactants in pellet form.     

Hydrodynamics of a rectangular liquid JET in an immiscible liquid–liquid system

Volume of fluid and continuum surface force methodologies were applied to two‐ and three‐dimensionally model the motion of a liquid jet injected vertically downward from a rectangular nozzle into another immiscible liquid. Grid independent solutions were obtained for a 10 mm² nozzle with aspect ratios in the range 1–10. It was found that unlike the 3D simulation, the 2D CFD model was not able to predict the necking and breakup features observed in the experimental system. The 3D model showed that upon exiting the rectangular nozzle the liquid jet underwent a transition before becoming circular in cross‐section and eventually reaching an equilibrium diameter prior to breakup into droplets. For a given nozzle geometry it was found that equilibrium jet diameter increased with increasing liquid volumetric flowrate, with good agreement between CFD simulations and experimental observations. The 3D model was applied to rectangular nozzles with different aspect ratios and it was found that for a given liquid flowrate there was an optimum aspect ratio for generating minimum‐sized droplets, which was approximately 30% less than for a circular nozzle with the same cross‐sectional area. © 2011 Canadian Society for Chemical Engineering     

Thermal behaviour of hydroxides, hydroxysalts and hydrotalcites

Mass spectrometric analysis of gases evolved during thermal decomposition of divalent metal hydroxides, hydroxysalts and hydrotalcites show that all these compounds undergo dehydration in the temperature range 30 <T < 220°C followed by decomposition at temperatures above 250°C. The latter step involves simultaneous deanation and dehydroxylation of the layers. Our observations conclusively prove that alternative mechanisms which envisage CO₂ evolution due to deanation at lower temperatures proposed by Kanezaki to be wrong.     

Inventory and flow control of the IGCC process with CO2 recycles

We present control strategies for an Integrated Gasification Combined Cycle (IGCC) power plant with CO₂ recycles. One recycle allows for composition control and is useful when the side objective is to produce synthesis gas for chemicals. The second recycle enables temperature control in the gas turbine by using CO₂ as a diluent. The main advantages of the second recycle are that NO_x is not produced and that CO₂/H₂O separation is significantly easier than CO₂/N₂ separation, which reduces cost if the CO₂ is to be sequestered. Models and control systems are developed using process network theory. We introduce a novel method for controlling quality variables and functions of inventories. Dynamic simulations using MATLAB/Simulink models show the response to step changes in setpoints and disturbances. The inventory control method is derived from conservation laws and the second law and it is applicable to process system models of any degree of complexity. A steady-state sensitivity analysis is performed, examining the effect of changing the temperature and C:O ratio within the gasifier on the power production.     

Experimental and parametric studies of Nd:YAG laser drilling on austenitic stainless steel

To ensure overall quality of a precision large-scale component, a tool condition monitoring (TCM) technique for multi-step form milling is presented. The form milling of fir tree slots for a steam turbine rotor is an appropriate example that requires a fine surface finish and high dimensional accuracy. Therefore, we propose a novel TCM system based on a multi-sensor fusion strategy which utilises the combination of spindle motor current and acoustic emission (AE) as well as adaptive thresholding for multiple manufacturing steps (roughing, semi-finishing and finishing). To investigate the tool deterioration process, tool longevity tests using a test piece are carried out for each step. With the aid of qualitative inspection, it is found that AE signals provide comprehensive tool state information regarding tool flank wear, crack propagation and severe adhesive wear. In addition, by intentionally adding a bundle of chips to the surface, bursts of AE of large amplitudes occur in finishing, which provides the possibility of discovering anomalous events related to surface quality. By careful consideration of such characteristics, provisional alert levels are determined using a two-dimensional diagram with respect to both sensors. The strategy is verified throughout the actual manufacturing processes of the rotors. The proposed TCM system shows not only an excellent ability to prevent catastrophic tool failure and surface irregularities in form milling but also acceptable expendability for various groove specifications.     

Focus-engineered coherent anti-Stokes Raman scattering microscopy: a numerical investigation

The coherent anti-Stokes Raman scattering (CARS) signal is calculated as a function of focal-field distributions with engineered phase jumps. We show that the focal fields in CARS microscopy can be shaped such that the signal from the bulk is suppressed in the forward detection mode. We present the field distributions that display enhanced sensitivity to vibrationally resonant object interfaces in the lateral dimension. The use of focus-engineered CARS provides a simple means to detect chemical edges against the strong background signals from the bulk.     

Invisible emotion magnification algorithm (IEMA) for real-time micro-expression recognition with graph-based features

Multimedia Tools and Applications - The interest in real-time micro-expression recognition has increased with the current trend in human-computer interaction applications. Presently, there are...     

Mangiferin Inhibits Apoptosis in Doxorubicin-Induced Vascular Endothelial Cells via the Nrf2 Signaling Pathway

Doxorubicin increases endothelial permeability, hence increasing cardiomyocytes’ exposure to doxorubicin (DOX) and exposing myocytes to more immediate damage. Reactive oxygen species are major effector molecules of doxorubicin’s activity. Mangiferin (MGN) is a xanthone derivative that consists of C-glucosylxanthone with additional antioxidant properties. This particular study assessed the effects of MGN on DOX-induced cytotoxicity in human umbilical vein endothelial cells’ (HUVECs’) signaling networks. Mechanistically, MGN dramatically elevated Nrf2 expression at both the messenger RNA and protein levels through the upregulation of the PI3K/AKT pathway, leading to an increase in Nrf2-downstream genes. Cell apoptosis was assessed with a caspase-3 activity assay, transferase-mediated dUTP-fluorescein nick end labeling (TUNEL) staining was performed to assess DNA fragmentation, and protein expression was determined by Western blot analysis. DOX markedly increased the generation of reactive oxygen species, PARP, caspase-3, and TUNEL-positive cell numbers, but reduced the expression of Bcl-2 and antioxidants’ intracellular concentrations. These were effectively antagonized with MGN (20 μM), which led to HUVECs being protected against DOX-induced apoptosis, partly through the PI3K/AKT-mediated NRF2/HO-1 signaling pathway, which could theoretically protect the vessels from severe DOX toxicity.