Effect of different plasticizer on structural and electrical properties of PEMA-based polymer electrolytes

Plasticized poly(vinyl chloride)/poly(ethyl methacrylate) PVC/PEMA-based blend polymer electrolyte films containing lithium perchlorate (LiClO₄) as a salt were prepared by solvent casting technique. The effects of the plasticization on structural, thermal and electrical properties of the plasticized polymer blend electrolytes were investigated. The changes in the structural and complex formation properties of the materials were studied by XRD and FTIR techniques. Dielectric relaxation studies of the polymer electrolyte have been undertaken, and the results are discussed. TG/DTA technique is used to study the thermal stability. Complex impedance analysis is used to calculate the bulk resistance of the complexes. The effect of different plasticizer on the structural and physical properties of polymer blend electrolyte is well correlated.     

Influence of Cobalt Doping on the Physical Properties of Zn<Subscript>0.9</Subscript>Cd<Subscript>0.1</Subscript>S Nanoparticles

Zn_0.9Cd_0.1S nanoparticles doped with 0.005–0.24 M cobalt have been prepared by co-precipitation technique in ice bath at 280 K. For the cobalt concentration >0.18 M, XRD pattern shows unidentified phases along with Zn_0.9Cd_0.1S sphalerite phase. For low cobalt concentration (≤0.05 M) particle size, d _XRD is ~3.5 nm, while for high cobalt concentration (>0.05 M) particle size decreases abruptly (~2 nm) as detected by XRD. However, TEM analysis shows the similar particle size (~3.5 nm) irrespective of the cobalt concentration. Local strain in the alloyed nanoparticles with cobalt concentration of 0.18 M increases ~46% in comparison to that of 0.05 M. Direct to indirect energy band-gap transition is obtained when cobalt concentration goes beyond 0.05 M. A red shift in energy band gap is also observed for both the cases. Nanoparticles with low cobalt concentrations were found to have paramagnetic nature with no antiferromagnetic coupling. A negative Curie–Weiss temperature of −75 K with antiferromagnetic coupling was obtained for the high cobalt concentration.     

Astragaloside IV Attenuates Ocular Hypertension in a Mouse Model of TGFβ2 Induced Primary Open Angle Glaucoma

Elevated intraocular pressure (IOP) is a major risk factor in developing primary open angle glaucoma (POAG), which is the most common form of glaucoma. Transforming growth factor-beta 2 (TGFβ2) is a pro-fibrotic cytokine that plays an important role in POAG pathogenesis. TGFβ2 induced extracellular matrix (ECM) production, deposition and endoplasmic reticulum (ER) stress in the trabecular meshwork (TM) contribute to increased aqueous humor (AH) outflow resistance and IOP elevation. Drugs which alter the glaucomatous fibrotic changes and ER stress in the TM may be effective in reducing ocular hypertension. Astragaloside IV (AS.IV), a novel saponin isolated from the roots of Astragalus membranaceus, has demonstrated antifibrotic and ER stress lowering effects in various tissues during disease conditions. However, the effect of AS.IV on glaucomatous TM fibrosis, ER stress and ocular hypertension has not been studied. Primary human TM cells treated with AS.IV decreased TGFβ2 induced ECM (FN, Col-I) deposition and ER stress (KDEL, ATF4 and CHOP). Moreover, AS.IV treatment reduced TGFβ2 induced NF-κB activation and αSMA expression in TM cells. We found that AS.IV treatment significantly increased levels of matrix metalloproteases (MMP9 and MMP2) and MMP2 enzymatic activity, indicating that the antifibrotic effects of AS.IV are mediated via inhibition of NF-κB and activation of MMPs. AS.IV treatment also reduced ER stress in TM3 cells stably expressing mutant myocilin. Interestingly, the topical ocular AS.IV eye drops (1 mM) significantly decreased TGFβ2 induced ocular hypertension in mice, and this was associated with a decrease in FN, Col-1 (ECM), KDEL (ER stress) and αSMA in mouse TM tissues. Taken together, the results suggest that AS.IV prevents TGFβ2 induced ocular hypertension by modulating ECM deposition and ER stress in the TM.     

Modelling and analysis of abrasive water jet cut surface topography

In this paper, a new approach proposed for modelling the three-dimensional (3D) topography produced on abrasive water jet (AWJ) cut surface is presented. It makes use of the trajectory of jet, predicted from the theory of ballistics and Bitter’s theory of erosion for material removal, for numerically simulating the cutting front. The 2D topography at different depths of the cut surface is generated by considering the trajectories on the cutting front and the abrasive particles impacting the walls of cut surface randomly. For realistic generation of topography on cut surfaces, several instantaneous profiles generated in each region of cut are superimposed to obtain an effective profile. The nature of effective profiles thus predicted is analyzed and validated using power spectral density analysis. The effective profiles predicted at different depths are in turn used to generate the 3D topography of AWJ cut surface. Results obtained with the proposed model are validated with the experimental results.     

Re-investigating the CO oxidation mechanism over unsupported MnO, Mn2O3 and MnO2 catalysts

Kinetic study of CO oxidation in combination with experiments of temperature-programmed oxidation (TPO) and reduction (TPR) have been performed on various unsupported crystalline manganese oxides (MnO_x); while the reactivity shows an order of MnO ≤ MnO₂ < Mn₂O₃ in a mixture of unit ratio of O₂/CO at/below 523 K. We propose that under the current conditions the interaction of adsorbed CO and O is mainly responsible for CO₂ formation on Mn₂O₃ and MnO₂ catalysts, following either the Langmuir–Hinshelwood mechanism or Eley–Rideal mechanism. Meanwhile, direct evidence from transient CO oxidation suggests that the Mars-van-Krevelen mechanism may occur for all catalysts simultaneously, especially, it is predominant for the MnO catalyst. The evidence of structural modifications during reaction was confirmed by Raman spectra obtained from used MnO.     

DRIFTS Study on the Decomposition Mechanism of Mn Acetylacetonates Supported on SBA-15

Manganese oxides supported on mesoporous SBA-15 catalysts have been prepared by molecularly designed dispersion method, using Mn(II) and Mn(III) acetylacetonate organic precursors. XRD and in situ Raman studies demonstrate the formation of highly dispersed Mn₂O₃ and Mn₃O₄ nanoparticles on SBA-15 for the calcined samples. The detailed decomposition mechanism was studied by using in situ DRIFTS. Acetylacetonate ligands are stable up to 573 K and can only be completely removed by oxygen treatment.     

Effect of heat treatment on mechanical properties of particulate reinforced Al6061 composites

Mechanical tests were carried out to study the behavior of albite reinforced Al 6061 matrix composite produced through the liquid vortex method and heat treated to T6 treatment. The matrix material Al 6061 was also tested as a control material for comparison. The hardness, ultimate tensile strength (UTS), compression strength, and Young’s modulus were found to be higher than those of the control alloy. The reinforcement noticeably enhances the dislocation density in the matrix upon cooling from the solutionizing temperature. The dislocations that serve as heterogeneous nucleation sites for strengthening precipitates during subsequent aging treatments, after the precipitation kinetics of the matrix of the composite, were compared to the control alloy. A higher density of dislocations and a higher density of intermediate precipitates were observed. There was a marginal improvement of tensile strength, compression, and hardness with aging.     

Novel thermo‐responsive semi‐interpenetrating network microspheres of gellan gum‐poly(N‐isopropylacrylamide) for controlled release of atenolol

Thermoresponsive microspheres of gellan gum‐poly(N‐isopropylacrylamide), i.e., GG‐P(NIPAAm) semi‐interpenetrating polymer networks (semi‐IPNs) have been prepared by ionic crosslinking and used to study the controlled release (CR) of atenolol (ATL), an antihypertensive drug. Interaction of the drug with polymers was studied by Fourier transform infrared (FTIR) spectroscopy. Differential scanning calorimetry (DSC) was used to confirm the polymorphism and molecular level dispersion of ATL. Scanning electron microscopy (SEM) indicated spherical nature and smooth surfaces of the microspheres with some debris attached on their surfaces. Mean particle size measured by laser light diffraction ranged between 34 and 76 μm. Equilibrium swelling performed at 25°C and 37°C in pH 7.4 phosphate buffer exhibited thermoresponsive nature of the polymers. In vitro drug release performed at 25°C and 37°C indicated temperature‐dependency of ATL release, which was extended up to 12 h. In vitro release profiles at both the temperatures confirmed thermoresponsive nature of the polymers giving pulsatile trends. The % cumulative release data have been fitted to an empirical equation to estimate transport parameters and to understand the nature of drug release. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010