Patterning of worm-like soft polydimethylsiloxane structures using a TiO2 nanotubular array

Patterned polydimethylsiloxane (PDMS) is an important structure for soft lithography. Various materials have been deployed as mold for patterning PDMS. Anodized nanotubular array has been sought after as cost-effective alternative for textured silicon. An array of TiO₂ nanotubes with characteristic diameter ≈140 nm and the length of ≈1.5 microns, created by anodic oxidation of a titanium substrate, was used here as a template for soft PDMS molding. The optimal molding process was developed by a combination of silanization, use of solvent, application of a vacuum, and hydraulic pressing. The silanization was confirmed by Fourier transform infrared spectroscopy and contact angle measurements while the PDMS structure was examined by scanning electron microscope and energy dispersive X-ray spectroscopy. Hydraulic pressing significantly improved the infiltration of PDMS into the pores of nanotubular array resulting in formation of PDMS nanobumps after separation of the polymer from the template. Complete infiltration of PDMS precursor into the cavity of nanotubes was observed on the hydraulic-pressed sample without toluene impurities. The hydraulic-pressed samples exhibited higher adhesion strength than nonpressed ones. The adhesive strength was measured by a simple experimental arrangement, in which the PDMS layer was stuck on a vertical glass surface followed by pulling it downwards.     

Involvement of surface cysteines in activity and multimer formation of thimet oligopeptidase

Thimet oligopeptidase is a metalloenzyme involved in regulatingneuropeptide processing. Three cysteine residues (246, 248,253) are known to be involved in thiol activation of the enzyme.In contrast to the wild-type enzyme, the triple mutant (C246S/C248S/C253S)displays increased activity in the absence of dithiothreitol.Dimers, purportedly formed through cysteines 246, 248 and 253,have been thought to be inactive. However, analysis of the triplemutant by native gel electrophoresis reveals the existence ofdimers and multimers, implying that oligomer formation is mediatedby other cysteines, probably on the surface, and that some ofthese forms are enzymatically active. Isolation and characterizationof iodoacetate-modified monomers and dimers of the triple mutantrevealed that, indeed, certain dimeric forms of the enzyme arestill fully active, whereas others show reduced activity. Cysteineresidues potentially involved in dimerization were identifiedby modeling of thimet oliogopeptidase to its homolog, neurolysin.Five mutants were constructed; all contained the triple mutationC246S/C248S/C253S and additional substitutions. Substitutionsat C46 or C682 and C687 prevented multimer formation and inhibiteddimer formation. The C46S mutant had enzymatic activity comparableto the parent triple mutant, whereas that of C682S/C687S wasreduced. Thus, the location of intermolecular disulfide bonds,rather than their existence per se, is relevant to activity.Dimerization close to the N-terminus is detrimental to activity,whereas dimerization near the C-terminus has little effect.Altering disulfide bond formation is a potential regulatoryfactor in the cell owing to the varying oxidation states insubcellular compartments and the different compartmental locationsand functions of the enzyme. Received March 1, 2003; revised June 17, 2003; accepted June 23, 2003.     

Flow influenced electrochemical corrosion of nickel aluminium bronze – Part I. Cathodic polarisation

The cathodic polarisation behaviour of CA 104 nickel aluminium bronze (NAB) has been examined in fully characterised seawaters (filtered and artificial) using the rotating disc electrode (RDE) and the rotating cylinder electrode (RCE). Linear sweep voltammetry and a potential step, current transient technique were used to examine the charge transfer and mass transfer controlled cathodic response as a function of both laminar and turbulent fluid flow. For freshly polished surfaces, the rate of irreversible charge transfer controlled oxygen reduction is controlled by the exchange of a single electron and hydrogen evolution is only significant at potentials more negative than approximately –1.0 V vs. the saturated calomel electrode (SCE).     

Extracellular Matrix Deposition and Remodeling after Corneal Alkali Burn in Mice

Corneal transparency relies on the precise arrangement and orientation of collagen fibrils, made of mostly Type I and V collagen fibrils and proteoglycans (PGs). PGs are essential for correct collagen fibrillogenesis and maintaining corneal homeostasis. We investigated the spatial and temporal distribution of glycosaminoglycans (GAGs) and PGs after a chemical injury. The chemical composition of chondroitin sulfate (CS)/dermatan sulfate (DS) and heparan sulfate (HS) were characterized in mouse corneas 5 and 14 days after alkali burn (AB), and compared to uninjured corneas. The expression profile and corneal distribution of CS/DSPGs and keratan sulfate (KS) PGs were also analyzed. We found a significant overall increase in CS after AB, with an increase in sulfated forms of CS and a decrease in lesser sulfated forms of CS. Expression of the CSPGs biglycan and versican was increased after AB, while decorin expression was decreased. We also found an increase in KS expression 14 days after AB, with an increase in lumican and mimecan expression, and a decrease in keratocan expression. No significant changes in HS composition were noted after AB. Taken together, our study reveals significant changes in the composition of the extracellular matrix following a corneal chemical injury.     

Non-heme Fe(IV)-oxo intermediates

High-valent non-heme iron-oxo intermediates have been proposed for decades as the key intermediates in numerous biological oxidation reactions. In the past three years, the first direct characterization of such intermediates has been provided by studies of several alphaKG-dependent oxygenases that catalyze either hydroxylation or halogenation of their substrates. In each case, the Fe(IV)-oxo intermediate is implicated in cleavage of the aliphatic C-H bond to initiate hydroxylation or halogenation. The observation of non-heme Fe(IV)-oxo intermediates and Fe(II)-containing product(s) complexes with almost identical spectroscopic parameters in the reactions of two distantly related alphaKG-dependent hydroxylases suggests that members of this subfamily follow a conserved mechanism for substrate hydroxylation. In contrast, for the alphaKG-dependent non-heme iron halogenase, CytC3, two distinct Fe(IV) complexes form and decay together, suggesting that they are in rapid equilibrium. The existence of two distinct conformers of the Fe site may be the key factor accounting for the divergence of the halogenase reaction from the more usual hydroxylation pathway after C-H bond cleavage. Distinct transformations catalyzed by other mononuclear non-heme enzymes are likely also to involve initial C-H bond cleavage by Fe(IV)-oxo complexes, followed by diverging reactivities of the resulting Fe(III)-hydroxo/substrate radical intermediates.     

Impact of Inspected Buffers on Production Parameters of Construction Processes

This paper examines the production implications of quality control inspections conducted on the buffer between processes in a construction project by modeling the linkage between these processes. Inspection of partially completed work at the end of one activity but before the beginning of work by the next activity is fairly common. Work that is deemed to be of sufficient quality is then made available for the next activity. Work that is deemed insufficient requires rework, typically by the trade appropriate to the activity that fed into the buffer, to bring the work into compliance. This has implications for workload management for that trade, of course, as well as for the reliability of work flow to the successor or downstream processes. While such situations are common in all construction sectors, an example from the residential construction sector was examined via a simulation model augmented by field data collected from residential construction projects. The impacts of the work flow into the predecessor process, the inspection pass rate, and resource availability were examined. The inspection pass rate was found to dramatically affect the reliability of work flow, unless resources are unlimited. Furthermore, the inspection pass rate was found to be functionally related to the production parameters of the process.     

Development of a methodology for characterizing commercial chlorinated latex gloves

Chlorination of gloves has gained popularity as a more permanent method of reducing the inherent tackiness of natural rubber latex compared to using powder as a dusting lubricant. Transmission of proteins in natural rubber latex into the air as a result of using powder on natural rubber latex gloves may cause serious complications to allergic individuals. A methodology for characterizing commercial chlorinated natural rubber latex gloves using a combination of attenuated total reflectance (ATR)–Fourier transform infrared (FTIR) spectroscopy and ion chromatography (IC) is described. ATR–FTIR studies established that 930–915 and 670–650 cm⁻¹ are definitive wavenumber ranges for the identification of chlorine in commercial chlorinated latex gloves. Confirmation of the ATR–FTIR results and semiquantification of the chlorine content in the latex gloves was carried out by the IC technique. This methodology can be used by glove manufacturers to determine the amount of chlorine in batches of commercial gloves, and thereby prevent possible threats to public health arising from the deterioration of surgical and examination chlorinated latex gloves under severe storage conditions before the end of their expected shelf life. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 672–682, 2001     

The Analysis of Metal Ions in Solution

Established methods for the chemical analysis of dissolved metal are concisely reviewed. In each case, the principles of a given technique are considered and its relative merits are outlined.     

Moving out of the red zone: addressing staff allocation to improve patient satisfaction.

BACKGROUND: Each summer, Hermann Hospital (Houston), like virtually all health care organizations, faces staffing challenges because of employee vacations, increased patient load, and staff turnover. A "zone" system was developed to address staff allocation, which was identified as a factor in deterioration of the hospital's patient satisfaction performance. ZONE SYSTEM: Every day, each unit or department designated the zone most appropriate based on factors identified in root cause analysis--high patient census, high patient acuity, emergent activity, and the number of float, agency, or unfamiliar staff members. A green zone defines conditions where the staff is very comfortable; yellow reflects increased activity; and red indicates that staff members are stressed and overwhelmed with patient needs. ACTION STEPS: Management's action steps included decreasing the nursing vacancy rate to minimize reliance on agency and float staff members and securing longer-term commitments from temporary staff members. Individual units also generated contingency plans, such as identifying a "partner unit" to provide shared staff members, supplies, and other assistance. RESULTS: The percentage of patients rating their overall experience at Hermann Hospital as "good" or "excellent" increased from 83% in August 1997 to 89% in August 1998, despite increases in admissions, patient days, operating room cases, and emergency department visits. DISCUSSION: The zone system provides a rapid way to quantify contributing factors to patient dissatisfaction and respond to them. Hermann Hospital is currently developing a broader zone system to include staff vacancy rates by departments, areas of increased patient census for prolonged periods, and balancing episodic zones with prolonged zones.     

Power spectral density analysis of optical substrates for gravitational-wave interferometry

The power spectral density of surface-relief variations on polished optical surfaces across microscopic through to macroscopic spatial scales is calculated from measurements on substrates that are being produced for the Laser Interferometer Gravitational-Wave Observatory (LIGO). These spectra give a guide to the scattering properties of the surface, which in turn critically influence the performance of LIGO. Measurements obtained by use of a full-aperture interferometer and an interference microscope with two different objectives are combined to produce one-dimensional power spectral density representations of the surfaces across spatial frequencies ranging from 0.1 to 8000 cm(-1). These measurements from different instruments are in good agreement with an analytic power spectrum that varies as nu(-1.5), where nu is the spatial frequency. Some anomalies in the power spectral density spectra can be related to aspects of the polishing process.