Redox processes in pressurised smoked salmon studied by resonance Raman spectroscopy

Non-thermal food preservation technology is based on the application of high pressures up to 600 MPa. Here we report a resonance Raman (RR) spectroscopic analysis of smoked salmon meat after high pressure processing. High quality spectra, which can be obtained even from packed salmon without spectral interference of the packing foil, allow determining pressure-dependent irreversible changes of the main RR-active components of salmon meat, astaxanthin and myoglobin/haemoglobin. High pressure-treatment causes a decrease of the relative RR intensities of astaxanthin as probed with 514 nm excitation which is in line with a slight attenuation of the originally intense red colour of the salmon meat. 413-nm excited RR spectra indicate a heterogeneous broadening of astaxanthin bands accompanied by the formation of deoxy-myoglobin or deoxy-haemoglobin. The results suggest that pressure-treatment facilitates the oxidative degradation of astaxanthin coupled to the reduction of metmyoglobin (methaemoglobin).     

Partialsynthesen von Cardenoliden und Cardenolid-Analogen. XIII. Synthese substituierter 14,21-Epoxy-5β,14β-card-20(22)-enolide

Partial Syntheses of Cardenolides and Cardenolide Analogues. XIII. Synthesis of Substituted 14,21-Epoxy-5β,14β-card-20(22)-enolide The 12-substituted 14,21-epoxy-5β,14β-card-20(22)-enolides 3 and 5 were synthesized by oxidation of the appropriate 17β-(3-furyl) derivatives 2b and 2c , respectively, with chromic acid. 5 was converted to the conjugated Δ⁹⁽¹¹⁾-12-ketone 6 by dehydrogenation with selenium dioxide. The biological activities of the new compounds were investigated and are discussed.     

Influence of pressure-assisted polymerization on the microstructure and strength of polymer-infiltrated ceramics

A method of manufacturing polymer-infiltrated ceramics (PICs) is to pre-infiltrate a porous ceramic with a liquid monomer and subsequently polymerize the organic component inside the ceramic structure. The volume reduction during polymerization leads to the formation of pores (defects), which has a detrimental effect on the mechanical properties of PICs. To avoid the generation of defects, a new polymerization method that uses pressure during polymerization was developed. To investigate the influences of pressure and heating rate on strength and microstructure, both parameters were varied. The influences of both parameters on the strength of PICs were studied using a biaxial test. The influence on the microstructure was investigated through microscopy. Fracture toughness and R-curve behavior of the manufactured PICs were determined with the SEVNB method. The process parameters have a strong influence on strength and microstructure of PICs. Defect-free PICs with improved strength could be manufactured using elevated pressure during polymerization. As expected, a distinct R-curve behavior and enhanced fracture toughness relative to composites manufactured using conventional methods was found. The developed manufacturing method leads to defectless PICs with increased mechanic behaviors.     

Energieeffizienz in der Vakuumtechnik

Energy efficiency in vacuum technology Vacuum is used to produce a huge variety of products of our everyday life. To provide the vacuum environment, a lot of energy is usually used and therefore the vacuum pumps should run as efficient as possible. Actually, many various improvements can be made to gain energy savings on vacuum pumps. With those considered in this paper it's possible to save 928 GWh/a of energy in the EU and thereof 629 GWh/a or 64 % are economically realizable. Only specific improvements concerning the vacuum system are taken into account, basic technology options, like motors, controls, etc., are excluded. To show and discuss the results a conserved energy supply curve is used.     

The acceptance of Tablet-PCs in classroom instruction: The teachers’ perspectives

Limited research has been conducted on the integration of Tablet-PCs in classroom instruction. This paper reports a qualitative study which investigates the acceptance of Tablet-PCs, seen as technological innovation, amongst teachers. The research approach intends to complement research on the acceptance of technology through a more detailed qualitative examination. Semi-structured interviews were conducted with 18 teachers during a pilot project introducing Tablet-PCs to classroom instruction at three different schools. The findings indicate diversity in the attitude of teachers towards the technology, but also with regards to the performance expectancy and the facilitating conditions.     

Ecotoxicological analysis of glasses obtained from industrial residues using E. coli and S. aureus as bioindicators

This work deals with the study of the effect of coal ashes and industrial residues in the inertness of glasses designed for industrial uses. Five formulations with four factors (residues) and constraints were used according a mixture design. The residues were dried, sieved and mixed according to the design. The formulations were melted at 1450 °C during 2 h for stabilization using 10% wt of Na₂CO₃ (fluxing agent). The melts were cast into a refrigerated water mold and annealed at 600 °C, and thus, the glasses were analyzed regarding their ecotoxicological effect using the Agar Diffusion Test for Escherichia coli and Staphylococcus aureus as bioindicators, comparing the results with the Artemia sp. Acute Toxicity Test. The results were studied by analysis of variance in order to determine the individual influence of each residue in the inertness of the glass system. As a final result, the ecotoxicological analysis showed that the galvanic residue makes a non-inert glass due to the high iron and zinc content of this waste. The Agar Diffusion Test is a fast and accurate technique to determine the toxicity of glass systems only for high concentration samples.     

Solvothermal synthesis,nanostructural characterization and gas cryo-adsorption studies in a metal–organic framework (IRMOF-1) material

A nanoporous metal–organic framework material, exhibiting an IRMOF-1 type crystalline structure, was prepared by following a direct solvothermal synthesis approach, using zinc nitrate and terephthalic acid as precursors and dimethylformamide as solvent, combined with supercritical CO₂ activation and vacuum outgassing procedures. A series of advanced characterization methods were employed, including scanning electron microscopy, Fourier-transform infrared radiation spectroscopy and X-ray diffraction, in order to study the morphology, surface chemistry and structure of the IRMOF-1 material directly upon its synthesis. Porosity properties, such as Brunauer–Emmet–Teller (BET) specific area (～520 m²/g) and micropore volume (～0.2 cm³/g), were calculated for the activated sample based on N₂ gas sorption data collected at 77 K. The H₂ storage performance was preliminary assessed by low-pressure (0–1 bar) H₂ gas adsorption and desorption measurements at 77 K. The activated IRMOF-1 material of this study demonstrated a fully reversible H₂ sorption behavior combined with an adequate gravimetric H₂ uptake relative to its BET specific area, thus achieving a value of ～1 wt.% under close-to-atmospheric pressure conditions.     

Assessment of space division strategies for generation of adequate computational models for solid foams

The present study is concerned with a competitive assessment of different strategies for the division of space in the generation of computational models for the microstructure of solid foams for a numerical analysis of their properties. The study includes the standard (Γ‐) Voronoi procedure, the δ-Voronoi procedure, a Voronoi procedure in Laguerre geometry as well as a simple foam evolution strategy. In addition to the basic versions of the individual strategies, smoothing and optimization approaches are used for a further improvement of the generated computational models. The quality of the models is assessed in terms of two quantitative criteria where the first criterion is the Kelvin parameter whereas the second criterion is based on the error in the statistical cell size distribution compared to experimental observations reported in the literature. All strategies are applied to the simplified case of two-dimensional model foams. Nevertheless, the results can be generalized to the three-dimensional case in a straight forward manner.