Structure Formation of Integral Asymmetric Composite Membranes of Polystyrene‐block‐Poly(2‐vinylpyridine) on a Nonwoven

The formation of an integral asymmetric membrane composed of a cylinder‐forming polystyrene‐block‐poly(2‐vinylpyridine) on a nonwoven by using solvent casting followed by solvent/nonsolvent exchange (phase inversion) is reported for the first time. The influence of parameters such as solvent composition, evaporation time of the solution‐cast block copolymer film before phase inversion, and immersion bath temperature is demonstrated. The optimized membranes are characterized in terms of stimuli‐responsive water flux properties. The morphologies of the membranes as well as of the bulk of the block copolymer are imaged by scanning force microscopy, scanning electron microscopy, and transmission electron microscopy.

     

Effect of Silica‐Coated Poly(butyl methacrylate)‐block‐poly(methyl methacrylate) Double‐Shell Particles on the Mechanical Properties of PMMA Composites

Silica nanoparticles with an average diameter of 12 nm are grafted with PBMA‐b‐PMMA double shells through typical sequential ATRP from bromoisobutyrate initiators anchored at the silica surface using an epoxysilane. A commercially available PMMA homopolymer is used for the preparation of composites with unmodified, silane‐modified and double‐shell‐modified silica particles. Good mechanical properties are obtained for silica double shell containing systems. The silica content in double shell particle systems is varied from 0 to 2.5 wt%. A significant improvement in impact properties is observed. The surface‐modified silica particles are characterized by ATR‐FTIR, NMR, GPC, and thermal analyses. TEM analysis is used to analyze the nature of dispersion of particles in the composites.

     

Ice Crystal Growth in Sucrose Solutions Containing Kappa- and Iota-Carrageenans

Measurements of ice recrystallization inhibition (IRI) and thermal hysteresis (TH) activities of kappa (κ)- and iota (ι)-carrageenans were carried out to examine whether they can be novel cryoprotectants or not. IRI measurements indicate that both carrageenans reduce recrystallization in sucrose solution, but that the IRI activity of κ-carregeenan is higher than that of ι-carrageenan. TH measurements indicate that κ- and ι-carrageenans do not exhibit TH activity. TH activity measurements of antifreeze glycoprotein (AFGP) in the presence of κ-carregeenan demonstrate that this carregeenan neither influences the TH activity of AFGP nor the shape of the ice crystals. The round ice crystal shape transformed into an angular and elongated shape in the presence of both carregeenans.     

The Rise of Retinal Organoids for Vision Research

Retinal degenerative diseases lead to irreversible blindness. Decades of research into the cellular and molecular mechanisms of retinal diseases, using either animal models or human cell-derived 2D systems, facilitated the development of several therapeutic interventions. Recently, human stem cell-derived 3D retinal organoids have been developed. These self-organizing 3D organ systems have shown to recapitulate the in vivo human retinogenesis resulting in morphological and functionally similar retinal cell types in vitro. In less than a decade, retinal organoids have assisted in modeling several retinal diseases that were rather difficult to mimic in rodent models. Retinal organoids are also considered as a photoreceptor source for cell transplantation therapies to counteract blindness. Here, we highlight the development and field’s improvements of retinal organoids and discuss their application aspects as human disease models, pharmaceutical testbeds, and cell sources for transplantations.     

Retinal Cell Death Caused by Sodium Iodate Involves Multiple Caspase-Dependent and Caspase-Independent Cell-Death Pathways

Herein, we have investigated retinal cell-death pathways in response to the retina toxin sodium iodate (NaIO₃) both in vivo and in vitro. C57/BL6 mice were treated with a single intravenous injection of NaIO₃ (35 mg/kg). Morphological changes in the retina post NaIO₃ injection in comparison to untreated controls were assessed using electron microscopy. Cell death was determined by TdT-mediated dUTP-biotin nick end labeling (TUNEL) staining. The activation of caspases and calpain was measured using immunohistochemistry. Additionally, cytotoxicity and apoptosis in retinal pigment epithelial (RPE) cells, primary retinal cells, and the cone photoreceptor (PRC) cell line 661W were assessed in vitro after NaIO₃ treatment using the ApoToxGlo™ assay. The 7-AAD/Annexin-V staining was performed and necrostatin (Nec-1) was administered to the NaIO₃-treated cells to confirm the results. In vivo, degenerating RPE cells displayed a rounded shape and retracted microvilli, whereas PRCs featured apoptotic nuclei. Caspase and calpain activity was significantly upregulated in retinal sections and protein samples from NaIO₃-treated animals. In vitro, NaIO₃ induced necrosis in RPE cells and apoptosis in PRCs. Furthermore, Nec-1 significantly decreased NaIO₃-induced RPE cell death, but had no rescue effect on treated PRCs. In summary, several different cell-death pathways are activated in retinal cells as a result of NaIO₃.     

A compact photomicroreactor design for kinetic studies of gas‐liquid photocatalytic transformations

A compact photomicroreactor assembly consisting of a capillary microreactor and small‐scale light emitting diodes was developed for the study of reaction kinetics in the gas‐liquid photocatalytic oxidation of thiophenol to phenyl disulfide within Taylor flow. The importance of photons was convincingly shown by a suction phenomenon due to the fast consumption of oxygen. Mass transfer limitations were evaluated and an operational zone without mass transfer effects was chosen to study reaction kinetics. Effects of photocatalyst loading and light sources on the reaction performance were investigated. Reaction kinetic analysis was performed to obtain reaction orders with respect to both thiophenol and oxygen based on heterogeneous and homogeneous experimental results, respectively. The Hatta number further indicated elimination of mass transfer limitations. Reaction rate constants at different photocatalyst loadings and different photon flux were calculated. Furthermore, the advantages of this photomicroreactor assembly for studying gas‐liquid photocatalytic reaction kinetics were demonstrated as compared with batch reactors. © 2015 American Institute of Chemical Engineers AIChE J, 61: 2215–2227, 2015     

Production of Particle‐Stabilized Nonspherical Emulsion Drops in Simple Shear Flow

Nonspherical drops are of interest in the formation of microcapsules in life sciences like food, pharmacy, and cosmetics, agro and fine chemicals as well as material sciences. Out of many systems, particle‐stabilized emulsion drops, so‐called Pickering emulsions, exhibit an interesting formulation. Systems with Pickering particles applied in an excess amount were investigated. During deformation, the particles fully covered the enlarged drop interfaces and prevented its relaxation to a spherical drop shape. Nonspherical drops could be produced in simple shear flow using an adequate process routine. The production in a simple device is a promising high‐throughput alternative to microfluidic devices.     

Operator training simulators for biorefineries: current position and future directions

Recent technological advances in the development of alternative energy sources, including biofuels, for transportation and energy requirements have demonstrated the need for highly skilled engineers and operators in the biotechnological industries. Although operator training simulators (OTS) used in the traditional chemical process industries may be used to train biorefinery operators and engineers, several distinct aspects of bioprocess operations make their direct application limited. The development and deployment of OTSs for use in biotechnological processes is therefore beginning to gain increasing attention. This review paper examines the present status of OTS development and use in biorefineries, including future considerations on how an OTS may be used to improve operator competence, maximise biorefinery operational efficiencies and protect people and the environment. The general premise of an OTS is that model‐based operator training simulators can be used to verifiably enhance the training of industrial operators to run complex biorefineries. Only a few examples of the design and application of OTSs in large‐scale biorefineries have so far been reported. A discussion of the mathematical models used for OTS development is briefly presented, as well as available OTS design frameworks and vendors, including their benefits and drawbacks. The review concludes by looking at possible future directions of OTS development and use in biorefineries and their contribution in facilitating the transition to a bio‐based economy. © 2018 Society of Chemical Industry     

mRNA openers and closers: modulating AU-rich element-controlled mRNA stability by a molecular switch in mRNA secondary structure

Approximately 3 000 genes are regulated in a time-, tissue-, and stimulus-dependent manner by degradation or stabilization of their mRNAs. The process is mediated by interaction of AU-rich elements (AREs) in the mRNA's 3'-untranslated regions with trans-acting factors. AU-rich element-controlled genes of fundamentally different functional relevance depend for their activation on one positive regulator, HuR. Here we present a methodology to exploit this central regulatory process for specific manipulation of AU-rich element-controlled gene expression at the mRNA level. With a combination of single-molecule spectroscopy, computational biology, and molecular and cellular biochemistry, we show that mRNA recognition by HuR is dependent on the presentation of the sequence motif NNUUNNUUU in single-stranded conformation. The presentation of the HuR binding site in the mRNA secondary structure appears to act analogously to a regulatory on/off switch that specifically controls HuR access to mRNAs in cis. Based on this finding we present a methodology for manipulating ARE mRNA levels by actuating this conformational switch specifically in a target mRNA. Computationally designed oligonucleotides (openers) enhance the NNUUNNUUU accessibility by rearranging the mRNA conformation. Thereby they increase in vitro and endogenous HuR-mRNA complex formation which leads to specific mRNA stabilization (as demonstrated for TNFalpha and IL-2, respectively). Induced HuR binding both inside and outside the AU-rich element promotes functional IL-2 mRNA stabilization. This opener-induced mRNA stabilization mimics the endogenous IL-2 response to CD28 stimulation in human primary T-cells. We therefore propose that controlled modulation of the AU-rich element conformation by mRNA openers or closers allows message stabilization or destabilization in cis to be specifically triggered. The described methodology might provide a means for studying distinct pathways in a complex cellular network at the node of mRNA stability control. It allows ARE gene expression to be potentially silenced or boosted. This will be of particular value for drug-target validation, allowing the diseased phenotype to ameliorate or deteriorate. Finally, the mRNA openers provide a rational starting point for target-specific mRNA stability assays to screen for low-molecular-weight compounds acting as inhibitors or activators of an mRNA structure rearrangement.     

Small-angle neutron scattering characterization of the structure of nanoporous carbons for energy-related applications

We used small-angle neutron scattering (SANS) and neutron contrast variation to study the structure of four nanoporous carbons prepared by thermo-chemical etching of titanium carbide TiC in chlorine at 300, 400, 600, and 800 °C with pore diameters ranging between ∼4 and ∼11 Å. SANS patterns were obtained from dry samples and samples saturated with deuterium oxide (D₂O) in order to delineate origin of the power law scattering in the low Q domain as well as to evaluate pore accessibility for D₂O molecules. SANS cross section of all samples was fitted to Debye-Anderson-Brumberger (DAB), DAB-Kirste-Porod models as well as to the Guinier and modified Guinier formulae for cylindrical objects, which allowed for evaluating the radii of gyration as well as the radii and lengths of the pores under cylindrical shape approximation. SANS data from D₂O-saturated samples indicate that strong upturn in the low Q limit usually observed in the scattering patterns from microporous carbon powders is due to the scattering from outer surface of the powder particles. Micropores are only partially filled with D₂O molecules due to geometrical constraints and or partial hydrophobicity of the carbon matrix. Structural parameters of the dry carbons obtained using SANS are compared with the results of the gas sorption measurements and the values agree for carbide-derived carbons (CDCs) obtained at high chlorination temperatures (>600 °C). For lower chlorination temperatures, pore radii obtained from gas sorption overestimate the actual pore size as calculated from SANS for two reasons: inaccessible small pores are present and the model-dependent fitting based on density functional theory models assumes non-spherical pores, whereas SANS clearly indicates that the pore shape in microporous CDC obtained at low chlorination temperatures is nearly spherical.