Radar cross section measurements using near-field radar imaging

In this paper a technique to obtain the far-field scattering signature of bodies, using near-field measurements, is proposed. The method is based on near-field radar imaging techniques. The backscattered field data are collected in a controlled environment over a large frequency band and aspect angle using a near-field antenna. A focused radar image of the body is generated. Probe correction to compensate for the radiation pattern of the interrogating antenna is conducted during the two-dimensional imaging of the object. The contribution from each scattering center to the total backscattered far-field is obtained from the radar image. The proposed technique is applied to obtain the far-field radar cross section (RCS) for an object from near-field measurements conducted in an anechoic chamber at the University of Pretoria, South Africa     

Cure Levels, Processing Methods and Meat Source Effects on Low-fat Frankfurters

Frankfurters were manufactured from lean meats (100% beef and 50:50 beef-pork) to contain reduced levels of fat (about 1.3%). A curing solutibn was added to yield 160% of fresh meat weight. Three processing methods, coarse ground tumbled, fine ground tumbled and fine ground emulsified were used. All products were cooked in live steam to 71°C internal temperature. Product yields, penetrometer values, color, chemical composition, caloric content and added water were evaluated. Emulsified frankfurters from 50:50 beef-pork mixtures at 160% cure had texture similar to conventional product as well as increased (P<0.05) yields, acceptable color and 74% fewer calories.     

Characterization of solid-phase welds between Ti---6A1---2Sn---4Zr---2Mo---0.1Si and Ti---13.5A1---21.5Nb titanium aluminide

Dissimilar-alloy welds have been produced between Ti---6Al---2Sn---Z4---2Mo---0.1Si (wt. %) and Ti---13.5Al---21.5 NB (wt.%) titanium aluminde using the three different solid-phase welding processes that create significantly different thermo-mechanical conditions at the weld interface. Exposure to supertransus temperatures, appreciable deformation and rapid cooling of the weld interface region during linear-friction welding promote dynamic recrystallization of beta grains and beta decomposition to fine martensitic products. In contrast, diffusion welding at temperatures below the base metal beta transus temperatures and at relatively low pressures minimizes deformation and microstructural variations in the weld interface region relative to the unaffected base metal. During capacitor-discharge resistance spot welding, extremely rapid heating of the weld interface region to near-solidus temperatures, and subsequent rapid cooling, result in the formation of a metastable, ordered-beta microstructure in the Ti---s13.5Al---21.6Nb and fine alpha-prime martensite in the Ti---6Al---2Sn---4Zr---2Mo-0.1Si.     

Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

Effect of air gap on cylindrical dielectric resonator antenna operating in TM/sub 01/ mode

The results of a numerical study on the effect of an air gap on the input impedance and resonance frequency of a cylindrical dielectric resonator (CDR) antenna operating in the TM/sub 01/ mode as a function of dielectric constant are presented. The CDR resides on a conducting ground plane and is excited by a coaxial probe through the bottom of the ground plane. Some of the numerical results are validated experimentally.<>     

L-arginine reduces kidney collagen accumulation and N-epsilon-(carboxymethyl)lysine in the aging NMRI-mouse

BACKGROUND: The aging process leads to glomerular basement membrane (GBM) thickening due to increased collagen accumulation. This mechanism can be explained by the nonenzymatic glycosylation hypothesis of collagen aging. We have published the positive effect of L-arginine on glucose-mediated cross-linking, and if the nonenzymatic glycosylation hypothesis of aging holds, the pharmacological effect of L-arginine on glucose-mediated cross-links in the aging Hannover NMRI mouse can be expected. METHODS: Animals were given L-arginine 50 mg/kg body weight/day orally and compared to a control group without treatment. RESULTS: Electron microscopical measurement of the GBM thickness showed significant differences between controls (4920 +/- 1680 A) and the experimental group (2345 +/- 815 A). Determination of the total kidney collagen content based upon 4-trans hydroxyproline revealed 13.9 +/- 3.9 mg/100 mg kidney weight (kw) in the untreated group versus 7.9 +/- 4.2 mg/100 mg kw in the treated group. For solubility studies based upon hydroxyproline determination, collagen was eluted by pepsin digestion. This revealed 18.7 +/- 3.9 mg/100 mg kw in the controls versus 7.8 +/- 4.8 mg/100 mg kw in the treated group. HPLC analysis of N-epsilon-(carboxymethyl)lysine (CML) showed in the treated group (1.847 +/- 0.247 nM/microM hydroxyproline) significantly lower concentrations than in the untreated group (3.399 +/- 0.349 nM/microM hydroxyproline). On sodium dodecyl sulfate (SDS) polyacrylamidegel electrophoresis, the eluates of the treated animals showed less high molecular weight material than their untreated mates. CONCLUSIONS: We cannot discriminate between the probable mechanisms of cross-linking but we clearly can state that L-arginine reduces cross-linking and collagen accumulation in aging collagen type IV accompanied and strongly associated with decreased CML content.     

Flow dynamics or ‘quaking’ in gravity discharge from silos

This paper reviews the characteristics of pulsating or cyclic flow of bulk solids during gravity discharge in bins and silos. The dynamic load phenomenon is often referred to as “silo quaking” and is influenced by various factors related to the type of flow pattern developed in the bin and the flow properties of the bulk material. Of particular relevance is the influence of ‘slip-stick’ during shear flow, and the velocity at critical sections in the silo during discharge. An overview of recent and current research on this subject is presented.     

Applications of ultrashort pulse propagation in Bragg gratings forwavelength-division multiplexing and code-division multiple access

We discuss theoretical and experimental studies on the propagation of ultrashort pulses through fiber Bragg gratings. We also consider several applications in optical communications to be found by combining ultrashort pulses and fiber Bragg gratings: a multiwavelength source for wavelength-division-multiplexed systems and a means for implementing optical code-division multiple access     

Optical characterization of low-temperature-grown GaAs forultrafast all-optical switching devices

Low-temperature-grown GaAs (LT-GaAs) is a promising material for all-optical switching devices due to its outstanding optical characteristics. In this paper, we outline a simplified model we have developed to describe the dynamics of the carriers in this material. We also report the results of a series of measurements that we have performed to characterize the optical properties of the material. Specifically, we present the first measurements of the two-photon absorption coefficient and the refractive index changes as a function of the growth and annealing temperatures in LT-GaAs. Finally, we show how our model can be used to optimize the material for applications in all-optical switching