FMR and EXAFS modeling of heat-treated Fe-rich and Co-rich TM-M thin films

Ion-beam sputter-deposited alloy films of Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ and Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ were examined for their magnetic and structural properties. Films were characterized by ferromagnetic resonance, vibrating sample magnetometry, and extended X-ray absorption fine structure (EXAFS) analysis. Using atomic parameters deduced from EXAFS modeling and fitting procedures, magnetic properties were calculated with no adjustable parameters. Correlation between perpendicular FMR measurements and EXAFS first-shell modeling suggests a low-temperature formation of cobalt-borides in the Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ alloy. Annealed Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ samples did not display evidence of structural and/or magnetic instabilities until the onset of long-range crystallization near T/sub ann/=400 degrees C.<>     

Nucleation of solidification in liquid droplets

Analytical and numerical methods have been developed to analyze the solidification kinetics of a mass of liquid droplets dispersed in a fluid or solid matrix using classical nucleation theory. The resulting analytical expressions and numerical calculations can be compared directly with calorimetric measurements of the droplet solidification exotherms to obtain information about the nucleation mechanism. With increasing contact angle at the solid-liquid-matrix triple point, the solidification onset, peak, and end temperatures and exothermic peak height all decrease sharply and the droplet solidification exotherms become broader. Decreasing either the droplet radius or the number of potential catalytic nucleation sites produces a similar but smaller effect. Distributions in droplet radius, contact angle, and nucleation sites have no effect on the solidification peak temperature, but the droplet solidification exotherms become broader and more symmetric. The solidification onset temperature is independent of cooling rate in the calorimeter, but the solidification peak and end temperatures decrease and the exothermic peak height increases with increasing cooling rate. Predicted droplet solidification exotherms are in excellent agreement with detailed experimental measurements on 10-nm-radius Cd droplets embedded in a solid Al matrix. Analytical predictions give best-fit values of 43 deg and 430 for the contact angle and the number of potential catalytic nucleation sites per droplet, respectively; numerical predictions give best-fit values of 43 deg and 750 for the contact angle and the number of potential catalytic nucleation sites per droplet, respectively.     

Study of the nutrient distribution in root tips of the tropical forage Brachiaria

A Brachiaria breeding project is being conducted at CIAT, Colombia to combine acid soil adaptation of B. decumbens with other favourable traits of Brachiaria species that are less adapted to acid soils. Micro-PIXE was applied to investigate nutrient uptake and distribution in root tips of different species grown in hydroponic culture under control and simulated acid soil stress conditions. Different sample measurement approaches were evaluated, including: (1) linear scans with single point measurements along the root axis; (2) mapping of whole root tips; and (3) mapping of root cross sections. Different tissue types could be distinguished on the base of differences in nutrient concentrations and/or Al stress. Al, if supplied under nutrient stress conditions, increased P accumulation in the central vascular tissue of the meristematic and elongation zone of B. decumbens and B. brizantha. Furthermore, a negative correlation was found between Al and Cl accumulation in the root cap of B. decumbens.     

Linear output feedback compensation of rank-one systems

A new method is presented for arbitrarily assigning the closed-loop poles of a linear multi-input/multi-output system using linear output feedback. The method employs a new notion of rank-one system representations and involves the use of state transformation matrices which preserve such representations while reducing the degree of the feedforward matrix     

Reminiscence: diffraction and the mountains of Alaska

Discusses, from a personal point of view, experiments carried out to study the diffraction and propagation of VHF, HF and MF radio waves in the early-mid 1950s in the mountains of Alaska     

A series active power filter based on a sinusoidalcurrent-controlled voltage-source inverter

A series active power filter working as a sinusoidal current source, in-phase with the mains voltage, has been developed and tested. The amplitude of the fundamental current in the series filter is controlled through the error signal generated between the load voltage and a pre-established reference. The control allows an effective correction of power factor, harmonic distortion and load voltage regulation. Compared with previous methods of control developed for series active filters, this method is simpler to implement because it is only required to generate a sinusoidal current, in-phase with the mains voltage, the amplitude of which is controlled through the error in the load voltage. The proposed system has been studied analytically and tested using computer simulations and experiments. In the experiments, it has been verified that the filter keeps the line current almost sinusoidal and in-phase with the line voltage supply. It also responds very quickly under sudden changes in load conditions, reaching its steady-state in about two cycles of the fundamental     

Knowledge, data, and models

The object-oriented approach to integrating knowledge data, and models is examined. Under the object-oriented paradigm, everything is an object, which is itself an encapsulation of data and methods to manipulate and access the data within the object. Thus knowledge, data, and models can be defined as special kinds of objects. Active knowledge/data language (KDL), a functional object-oriented database system is considered, covering the active-KDL-type system and functions, and query-driven simulation     

A probabilistic method for the design of power grounding systems

An improved multivariable, probabilistic method for the safety analysis of power grounding systems is presented. The application of this method is demonstrated in four examples. The first three examples illustrate the practical evaluation of one new and two existing substation grounding grids when the substation is connected to an overhead distribution system. The fourth example ascertains the relative impact of a difference between the S curve of IEC Publication 479 and Dalziel's equation for the allowable body current used in ANSI/IEEE Std 80-1986 on the validity of an exposure model based on the requirements of Std 80. In this example, the statistical data on ground faults have been taken from actual system records. Further possible refinements of the exposure model are discussed     

Assessing Environmental Risks: Lessons From Superfund

This essay analyzes the use of risk assessment in Superfund, the controversial American hazardous waste cleanup programme. We argue that risk assessment has been used in three ways in discussing policy options in this programme: as a metric for assessing performance; as a means for resolving conflicts; and as a tool for comparing different environmental initiatives. Use of risk reduction as an analytical tool in European efforts to clean up hazardous waste sites is discussed. We conclude that while risk assessment has potential utility for each of these applications, there are also accompanying technical and political difficulties.     

Important lessons derived from X.500 case studies

X.500 is a new and complex electronic directory technology that is still unproven in many organizations. The author presents case studies of 15 pioneering pilot and operational X.500 based directory services, and provides valuable insights into how organizations are coming to understand this new technology and derive benefits from it. The case studies presented cover a reasonably broad spectrum of organizations, including computer suppliers, government organizations, universities, and research institutes, as well as the UK and US defense community. Some of the factors that were critical to the success of the X.500 projects studied are identified