SEM-EDX analysis in the source apportionment of particulate matter on Hypogymnia physodes lichen transplants around the Cu smelter and former mining town of Karabash, South Urals, Russia

Scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDX) of particulate matter on lichen transplant thalli (Hypogymnia physodes) was assessed as a complementary technique to wet chemical analysis for source apportionment of airborne contaminants. Transplants (2 month exposure) stationed in the Cu smelter and former mining town of Karabash were compared with those from a control site 30 km south. Particulate matter in Karabash samples (715 analyses) showed higher levels of S, Pb, Cu, Sn and Zn compared with the control (598 analyses). Complex element associations among the particles confounded detailed mineralogical identifications, and therefore a simplified particle classification scheme was devised for source apportionment. Karabash samples contained high levels of particles classified as mining-related (MRP), and these were also identified in control samples, indicating wide spatial dispersion from the smelter and highlighting the sensitivity of the method. It was noted that MRP <2.5-microm diameter were poorly represented on lichen surfaces suggesting this may limit the usefulness of Hypogymnia transplants as proxies when assessing human health impacts from airborne particulates. Analyses of the lichen thallus surface (away from surface particulates) revealed high levels of Cu, Zn, Fe and Pb associated with organics in the Karabash samples compared with the control, with a proportionate loss of K, interpreted as being due to a stress-related increase in cell membrane permeability. This type of analysis may provide a novel SEM-EDX-based method for assessing lichen vitality. The techniques developed are presented and further implications of the study are discussed.     

The characterisation of friction stir welding process effects on stiffened panel buckling performance

The introduction of advanced welding methods as an alternative joining process to riveting in the manufacture of primary aircraft structure has the potential to realise reductions in both manufacturing costs and structural weight. However, welding processes can introduce undesirable residual stresses and distortions in the final fabricated components, as well as localised loss of mechanical properties at the weld joints. The aim of this research is to determine and characterise the key process effects of friction stir welding assembly methods on stiffened panel static strength performance. Utilising experimentally validated finite element modelling methods, it is demonstrated that welding induced residual stresses have a significant influence, and that collapse behaviour is less sensitive to advanced process effects and process effect magnitudes than panel initial buckling behaviour.     

Biodegradation of urea in river waters under controlled laboratory conditions

The biodegradation of urea in river waters has been evaluated under laboratory conditions. Urea will degrade to ammonia at a rate depending on the bacterial state of the river water and on the water temperature. Under normal conditions no breakdown may be expected to occur at temperatures below 8°C for 14 days contact. In river waters with a high suspended solids content, simulating extreme winter river conditions, a maximum breakdown of 3–6 per cent daily of the original urea levels was found for temperatures not exceeding 8°C during the first 7 days contact.     

Speciation of selenium in plant water extracts by ion exchange chromatography-hydride generation atomic absorption spectrometry

Determination of selenium (Se) speciation in plants is important in studying the bioavailability and toxicity of Se in Se-contaminated soil/sediment. In this study, we used an anion exchange resin (Dowex 1-10X) to separate Se into non-amino acid organic Se, Se-amino acids, selenite (Se [IV]) and selenate (Se [VI]) in a plant (Stanleya pinnata) extract. The hydride generation atomic absorption spectrometry (HGAAS) was used to determine concentrations of these Se compounds in plant extracts. Results showed that Se compounds can be quantitatively separated by the resin column. Recovery of five spiked standard Se compounds (trimethylselenonium ion (TMSe+), dimethylselenoxide (DMSeO), selenomethionine (Semet), Se [IV] and Se [VII]) in the plant extract ranged from 92.9 to 103%. Water extractable Se accounted for 60.4-72.6% of the total Se in the plant. Among the soluble Se compounds in the plant extract, Se-amino acids were 73-85.5%, Se [VI] ranged from 7.5 to 19.5% and non-amino acid organic Se was less than 7%. Se [IV] in most samples was below the detection limit (1 microg/g). This study showed that considerable amounts of the accumulated Se [VI] in the plant was metabolized to Se-amino acids during growth of the plant.     

A computer technique for predicting smoke movement in tall buildings

An approach to the analysis of stack effect has been developed which allows the prediction of internal air flow quantities and associated pressure differentials for specific buildings prior to construction. An example of the application of this analysis is presented for a hypothetical 75-story office building. Note: The authors presented this paper at a symposium on “The Control of Smoke Movement on Escape Routes in Buildings,” sponsored by the Joint Fire Research Organization and held on April 9 and 10, 1969 in Hertfordshire, England.     

A preliminary note on the sequential decomposition of pectin by aquatic bacteria

In a eutrophic lake, an inverse relationship was observed between total aerobic heterotrophic bacteria and their pectolytic share which consisted mainly of Flavobacterium-Cytophaga species. When grown in a medium containing pectin and yeast extract as organic compounds pure cultures of the most abundant type of this bacterial group showed a diauxic characteristic of growth. Short time before entering the first lag phase of growth, production of pectolytic enzymes increased until the end of the second log phase of growth. This phenomenon may be due to the mechanism of a catabolic repression and derepression.     

泡沫模板与节能建筑

在建筑施工中，模板通常需要反复支、拆和重复使用，而且希望其次数越多越好。可是有一种模板，现在还不常用，它只能使用１次，在混凝土达到拆模强度时不再拆除脱离混凝土而是作为混凝土结构的一部分，有人称其为“永久性模板”，英文称：Ｓｔａｙ－ｉｎ－ｐｌａｃｅｆｏ...