Error of measurement of coolant temperature in VVÉR-440 reactor

Translated from Atomnaya Énergiya, Vol. 67, No. 5, pp. 358–359, November, 1989.     

Nitrogen-Nitride Equilibria in Molten Uranium-Thorium-Tin Alloys

Work has been done on the molten ternary system U-Th-Sn to provide a selective nitriding separation scheme. The nitride formation reaction has been studied as a function of temperature (1490° to 1700°C) and weight percent of U/Th in Sn, using a Sievert's-type apparatus. Nitride formation has been demonstrated in a U-Th-Gd system.     

Polygonal approximation for image segmentation

A new learning model for real-time, grey-level image segmentation is presented. The model gives excellent results for images with different shapes.     

Analysis of strategies for containment venting in case of severe accidents

During a core melt accident, a pressurization of the containment has to be expected, which could lead to a failure of the containment due to overpressurization. This failure mode is expected to be the most likely one for large dry containments under accident conditions. Also during a core melt accident, a large quantity of hydrogen may be generated, giving the potential of a loss of containment integrity due to violent hydrogen combustion. Timely venting of the containment atmosphere can prevent overpressurization and may perhaps make the hydrogen situation in the containment less severe. This paper discusses the thermodynamic consequences of different vent strategies for a large German PWR during core melt accidents.     

Rheology and microstructure of semi-solid aluminum alloys compressed in the drop-forge viscometer

The rheological behavior and microstructure of semi-solid aluminum alloys were studied using a novel apparatus, the drop-forge viscometer (DFV). The viscometer determines force from the second-derivative-of-displacement data with respect to time and permits calculations of viscosities at shear rates in excess of 1000 s⁻¹. Alternatively, the DFV can be operated like a conventional parallel-plate viscometer, attaining shear rates as low as 10⁻⁵ s⁻¹. Rapid compression experiments (in the DFV) result in first rapidly increasing, then decreasing, shear rates. In a typical experiment, the viscosity decreased from about 100 to 1 Pa·s as the shear rate increased from approximately 200 to 1300 s⁻¹ in less than 4 ms. The viscosity later increased to about 10 Pa·s as the shear rate decreased from 1300 to 30 s⁻¹ over 2 ms. The minimum viscosity obtained depended on the maximum shear rate, not the duration of shear. The dual observed phenomena of (1) a very rapid drop of viscosity with increasing shear rate followed by (2) a relatively slow increase of viscosity with decreasing shear rate thereafter have potential significance for future machine and process design. For example, it should be possible to form higher fraction solid slurries than is now feasible by applying vigorous shear to semi-solid slurries just before the metal is introduced to the die entrance. The DFV was used to calculate viscosity as a function of shear rate for samples produced by the commercial strain-induced, melt-activated (SIMA) and magnetohydrodynamic (MHD) methods, as well as the recently developed Massachusetts Institute of Technology (MIT) method. Isothermal experiments were conducted between fraction solid of 0.44 and 0.67 for the various alloys (corresponding to a temperature range of 579 °C to 611 °C). The viscosity of the commercial semi-solid Al-Si alloys A357 and A356 produced by the various methods was similar. Separation of liquid and solid phases was not observed in rapid compression experiments shorter than 10 ms, either visually or with energy-dispersive spectroscopy (EDS) characterization. At low compression velocities, segregation was observed and increased with increasing amounts of strain. The maximum fraction solid compressed at high and low shear rates were 0.67 and 0.69, respectively.     

Approximate channel identification via δ‐signed correlation

A method of approximate channel identification is proposed that is based on a simplification of the correlation estimator. Despite the numerical simplification (no multiplications or additions are required, only comparisons and an accumulator), the performance of the proposed estimator is not significantly worse than that of the standard correlation estimator. A free (user selectable) parameter moves ‘smoothly’ from a situation with small sum‐squared channel estimation error but hard‐to‐identify channel peaks, to one with a larger sum‐squared estimation error but easy‐to‐identify channel peaks. The proposed estimator is shown to be biased and its behaviour is analysed in a number of situations. Applications of the proposed estimator to sparsity detection, symbol timing recovery and to the initialization of blind equalizers are suggested. Copyright © 2002 John Wiley & Sons, Ltd.     

Pulse-Frequency Characteristics in Bifurcation Problems

Generation of self-oscillations under unstable stationary states of nonlinear control systems, which may contain delay of complicated nature (the Andronov–Hopf bifurcation), and approximate design of self-oscillating states and their asymptotes are studied with the help of pulse-frequency characteristics of the linear component of a system.