Minimizing Energy Barrier in Intermediate Connection Layer for Monolithic Tandem WPeLEDs with Wide Color Gamut

Perovskite light-emitting diodes (PeLEDs) show promising prospects in the wide color gamut display owing to their ultra-narrow full width at half maximum (FWHM). However, up to now, all perovskite white LEDs integrated by standard red, green, and blue perovskite emitters, namely, monolithic white PeLEDs (WPeLEDs), have been rarely reported, owing to facing some issues, e.g., solvent incompatibility in solution technique, ion exchange, and energy transfer between different emission centers. Herein, centered on these issues, an optimal intermediate connection layer (ICL) of Po-T2T/LiF/Ag/HAT-CN/MoO₃ is adopted to successfully develop monolithic tandem multicolor PeLEDs and WPeLEDs for the first time. The multicolor PeLEDs can achieve the best external quantum efficiency of 1.8% and the highest luminance of 4844 cd m⁻². Besides, the red/green/blue (R/G/B) monolithic tandem WPeLED shows a standard white International Commission on Illumination coordinate of (0.33, 0.33) and achieves an extremely wide color gamut reaching  National Television Standards Committee of 130%. This study is the first to realize the standard R/G/B co-electroluminescence in a monolithic perovskite device and offers a feasible strategy for developing wide-color gamut perovskite displays.     

Doped/Undoped A1-A2 Typed Copolymers as ETLs for Highly Efficient Organic Solar Cells

The electron transport layer (ETL) is a critical component in achieving high device performance and stability in organic solar cells. Conjugated polyelectrolytes (CPEs) have become an attractive alternative due to film-forming properties and ease of preparation. However, p-type CPEs generally exhibit poor charge mobility and conductivity, incorporation of electron-withdrawing units forming alternated D-A conjugated backbone can make up for these deficiencies. Herein, the ratio of electron withdrawing moieties are further increased and two poly(A1-alt-A2) typed PIIDNDI-Br and PDPPNDI-Br based on the combination of naphthalene diimide (NDI) with isoindigo (IID) or diketopyrrolopyrrole (DPP) via direct arylation polycondensation are synthesized. These CPEs possess excellent alcohol solubility, a suitable lowest unocuppied molecular orbital energy level, and work function tunability. Surprisingly, the incorporation of IID and DPP units generate distinct self-doping behaviors, which are confirmed by UV–vis absorption and ESR spectra. However, no matter doped or undoped, both CPEs present better charge-transporting properties and conductivity when utilized as ETLs. The PIIDNDI-Br and PDPPNDI-Br display good universal compatibility with the blend of PM6:Y6 and PM6:L8-BO, and PCEs of 18.32% and 18.36% are obtained, respectively, which also present excellent storage stability. In short, the combination of two different acceptors demonstrates an efficient strategy to design highly efficient ETLs for high performance photovoltaic devices.     

稀疏阵列波达方向估计研究进展

波达方向(direction of arrival, DOA)估计是阵列信号处理领域的重要研究方向,也是电子侦察与电子攻击领域的关键技术之一。以提高DOA估计精度和降低计算复杂度为导向,结合模型驱动和数据驱动方法的各自优势,提出了基于深度展开网络的DOA估计统一框架,阐述了稀疏阵列离网格DOA估计、无网格DOA估计以及混合信号参数估计等方面的研究进展。对复杂信号模型下的DOA估计、深度展开网络性能分析与挖掘以及分布式稀疏阵列回波信号融合处理等后续的研究内容进行了展望。     

Boosting Piezo-Catalytic Activity of KNN-Based Materials with Phase Boundary and Defect Engineering

Although the piezo-catalysis is promising for the environmental remediation and biomedicine, the piezo-catalytic properties of various piezoelectric materials are limited by low carrier concentrations and mobility, and rapid electron-hole pair recombination, and reported regulating strategies are quite complex and difficult. Herein, a new and simple strategy, integrating phase boundary engineering and defect engineering, to boost the piezo-catalytic activity of potassium sodium niobate ((K, Na)NbO₃, KNN) based materials is innovatively proposed. Tur strategy is validated by exampling 0.96(K_0.48Na_0.52)Nb_0.955Sb_0.045O₃-0.04(Bi_xNa_4-3x)_0.5ZrO₃-0.3%Fe₂O₃ material having phase boundary engineering and conducted the defect engineering via the high-energy sand-grinding. A high reaction rate constant k of 92.49 × 10⁻³ min⁻¹ in the sand-grinding sample is obtained, which is 2.40 times than that of non-sand-grinding one and superior to those of other representative lead-free perovskite piezoelectric materials. Meanwhile, the sand-grinding sample has remarkable bactericidal properties against Escherichia coli and Staphylococcus aureus. Superior piezo-catalytic activities originate from the enhanced electron-hole pair separation and the increased carrier concentration. This study provides a novel method for improving the piezo-catalytic activities of lead-free piezoelectric materials and holds great promise for harnessing natural energy and disease treatment.     

In Situ Artificial Hybrid SEI Layer Enabled High-Performance Prelithiated SiOx Anode for Lithium-Ion Batteries

Considered the promising anode material for next-generation high-energy lithium-ion batteries, SiO_x has been slow to commercialize due to its low initial Coulombic efficiency (ICE) and unstable solid electrolyte interface (SEI) layer, which leads to reduced full-cell energy density, short cycling lives, and poor rate performance. Herein, a novel strategy is proposed to in situ construct an artificial hybrid SEI layer consisting of LiF and Li₃Sb on a prelithiated SiO_x anode via spontaneous chemical reaction with SbF₃. In addition to the increasing ICE (94.5%), the preformed artificial SEI layer with long-term cycle stability and enhanced Li⁺ transport capability enables a remarkable improvement in capacity retention and rate capability for modified SiO_x. Furthermore, the full cell using Li(Ni_0.8Co_0.1Mn_0.1)O₂ and a pre-treated anode exhibits high ICE (86.0%) and capacity retention (86.6%) after 100 cycles at 0.5 C. This study provides a fresh insight into how to obtain stable interface on a prelithiated SiO_x anode for high energy and long lifespan lithium-ion batteries.     

基于关系强度理论与反馈机制的信息传播动态网络表示

现有多数网络表示学习方法不能很好地贴合真实世界的信息传播网络,且无法对信息传播动态网络的时间特性与动力学演化特征进行有效建模。提出一种新的信息传播动态网络表示模型,基于关系强度将信息传播动态网络划分为关系网络与传播网络,并分别计算变化节点对的概率密度和邻接矩阵。通过更新节点注意力强度矩阵,聚合节点邻域变化信息,并融合节点邻域变化信息、自身历史信息以及外部影响因素,对信息传播动态网络进行归纳式表示学习。引入反馈机制,将最新的节点表示反馈到邻居节点,解决网络表示不及时的问题,提升网络表示性能。实验结果表明,与Know-Evolve、DyRep、LDG等模型相比,该模型的命中率和平均排名提升显著,与LDG模型相比,其时间效率在Social Evolution数据集和Github数据集上分别提升了91.8%、87.2%。     

The research on channel estimation and signal-noise ratio estimation based on minimum error entropy kalman filter for single carrier frequency domain equalization system

In this paper, the channel estimation and signal-to-noise ratio (SNR) estimation technique of single-carrier frequency domain equalization (SC-FDE) system under low SNR in aeronautical multipath channel are studied, a SNR estimation algorithm which is easy to implement in engineering and an improved LS channel estimation algorithm based on Kalman filter using minimum error entropy (MEE-KF) are proposed. This paper first introduces the SC-FDE system and introduces the principle of MEE-KF, and then, the channel estimation flow based on MEE-KF is obtained by combining it with the traditional LS channel estimation algorithm, which makes the estimation results perform better. Simulation results show that after getting more accurate noise variance, the channel estimation results can better follow the changes of the channel after MEE-KF processing, so as to resist the doppler frequency offset effect and make the channel estimation results more accurate, that is the channel response results of the data part can be closer to the real situation, so that the communication performance of SC-FDE system has also been greatly improved.     

Marine-Derived Hydrogels for Biomedical Applications

Marine organisms provide novel and broad sources for the preparations and applications of biomaterials. Since the urgent requirement of bio-hydrogels to mimic tissue extracellular matrix (ECM), the natural biomacromolecule hydrogels derived from marine sources have received increasing attention. Benefiting from their outstanding bioactivity and biocompatibility, many attempts have been made to reconstruct ECM components by applying marine-derived natural hydrogels. Moreover, marine hydrogels have been successfully applied in biomedicine by means of microfluidics, electrospray, and bioprinting. In this review, the classification and characteristics of marine-derived hydrogels are summarized. In particular, their role in the development of biomaterials is also introduced. Then, the recent advances in bio-fabrication strategies for various hydrogel materials are focused upon. Besides, the influences of hydrogel types on their functions in biomedical applications are discussed in depth. Finally, critical reflections on the limitations and future development of marine-derived hydrogels are presented.     

Recent Development of Jumping Motions Based on Soft Actuators

Drawing inspiration from the jumping motions of living creatures in nature, jumping robots have emerged as a promising research field over the past few decades due to great application potential in interstellar exploration, military reconnaissance, and life rescue missions. Early reviews mainly focused on jumping robots made of lightweight and rigid materials with mechanical components, concentrating on jumping control and stability. Herein, attention is paid to the jumping mechanisms of soft actuators assembled from various soft smarting materials and powered by different stimulus sources. The challenges and prospects of soft jumping actuators are also discussed. It is hoped that this review will contribute to the further development of soft jumping actuators and broaden their practical applications.     

High-Performing Quasi-2D Perovskite Photodetectors with Efficient Charge Transport Network Built from Vertically Orientated and Evenly Distributed 3D-Like Phases

Quasi-two-dimensional (Q-2D) perovskites are emerging as one of the most promising materials for photodetectors. However, a significant challenge to Q-2D perovskites for photodetection is their insufficient charge transport ability, which is mainly attributed to their hybrid low-dimensional n-phase structure. This study demonstrates that evenly-distributed 3D-like phases with vertical orientation throughout the film can greatly facilitate charge transport and suppress charge recombination, outperforming the prevalent phase structure with a vertical dimension gradient. Based on such a phase structure, a Q-2D Ruddlesden−Popper perovskite self-powered photodetector achieving a combination of exceptional figures-of-merit is realized, including a responsivity of 0.45 AW⁻¹, a peak specific detectivity of 2.3 × 10¹³ Jones, a 156 dB linear dynamic range, and a rise/fall time of 2.89 µs/1.93 µs. The desired phase structure is obtained by utilizing a double-hole transport layer (HTL), combining hydrophobic PTAA and hydrophilic PEDOT: PSS. Besides, the dependence of the hybrid low-dimensional phase structure is also identified on the surface energy of the buried HTL substrate. This study gives insight into the correlation between Q-2D perovskites’ phase structure and performance, providing a valuable design guide for Q-2D perovskite-based photodetectors.