铈对中铝耐热铸铁抗氧化性能的影响

采用氧化增重法测定了含Ce中铝耐热铸铁在850℃时氧化动力学曲线，用SEM，X－ray对氧化膜表面的形貌，结构及氧化层－基体界面进行了观察分析，结果表明：Ce改变了中铝耐热铸铁氧化膜的结构和组成，提高了中铝耐热铸铁的抗氧化性能。     

热处理对多孔铝合金压缩吸能性能的影响

采用渗流铸造工艺 ,制备了Al Si系多孔铝合金 ,讨论了其压缩变形特征及能量吸收性能 ,分别对ZL10 1、ZL111两种多孔铝合金进行T6热处理 ,研究了热处理对这两种多孔铝合金压缩吸能性能的影响。研究结果表明 ,热处理能够提高多孔铝合金的能量吸收能力 ,对屈服强度及能量吸收效率也有显著的影响 ,为提高多孔铝合金的压缩性能 ,应尽可能施行热处理     

汽车稳定杆组织与疲劳性能研究

对28Mn6钢制造的汽车稳定杆，分别采用整体感应加热-整体淬火、连续感应加热淬火两种不同工艺热处理，并进行了台架疲劳寿命试验。采用光镜分析了不同稳定杆的金相组织，用扫描电镜分析了早期疲劳断裂的稳定杆断口形貌。结果表明，获得细小的高韧性索氏体组织是保证良好疲劳寿命的关键，稳定杆喷丸表面质量、游离铁素体也是影响疲劳性能的重要因素。     

一种非对称6-PSS并联机构的工作空间和灵活度研究

针对非对称并联机构在某些方面有着特殊的应用但研究较少的现状，对一种非对称6-PSS并联机构工作空间和灵活度进行了研究，得到了其工作空间和灵活度随结构参数和姿态要求的变化规律，得出此机构可以应用在y轴方向工作空间要求大，而绕x轴转角要求不高的场合。为进一步扩大并联机构的实际应用提供了依据。     

面向特征的STEP-NC加工方法研究

介绍了STEP-NC数据结构的基本特征，分析了STEP-NC控制器的功能结构，研究了从STEP-NC文件中直接提取制造信息并在实验平台上进行实际加工的基本方法，建立了基于特征的数控加工系统，提出了相应的实现方法和技术。最后在VC＋＋6．0和ST-Developer10集成环境下，利用开放式三维实验平台提供的运动控制器函数库和动态连接库，开发了一个基本的STEP-NC控制平台，其基本功能包括STEP-NC文件的翻译、制造信息的提取、执行和控制等，并能以特征为单位进行加工实验。     

The Inventory for Chinese LFC in 2006

1. Introduction Lost Foam Casting has been introduced into China for two decades, and it is getting more popularity in foundry industry.In China there are two associations responsible for the LFC industry and academic exchanges: Chinese Lost Foam Casting Society (CLFCS) and Chinese Association of Full Mold Casting.     

层流冷却工艺在首钢迁钢热轧分厂的应用

介绍了首钢迁钢公司2160热轧分厂层流冷却的工艺布置、冷却区的结构组成、操作模式、冷却制度及冷却系统的控制功能。该系统投产后，带材的卷取温度偏差可控制在±8℃以内，且96．8％的产品卷取温度偏差可控制在±5℃内，从而有利于提高产品的性能和表面质量，也为生产高质量的产品打下坚实基础。     

Structure and Properties Characterization of Ceramic Coatings Produced on Steel Using a Combined Technique

STEEL is the most widely used material in engineering,but unfortunately,steel exhibits poor wear resistanceand obvious contact corrosion.For decades,researchersprepared coatings on steel to improve its properties;ceramic is one of these coatings.To obtain ceramiccoatings on steel,many researchers use techniques suchas plasma spraying,laser cladding,etc.,but some ofthem are too expensive,some of them have a deep heataffected zone in the substrate,and some of them cannot bond well with the subs…     

DISTRIBUTION AND EFFECT OF Ce IN RE BEARING DUCTILE IRON

The dependence of nodularization of graphite upon Ce content in RE bearing nodular castiron,prepared by directional solidification,has been investigated by electrolyticextraction-radioisotope assay analysis of Ce in each phase of the iron together withmeasurement of nodulized graphite.Results show that the Ce occurs mainly as alloyed form.In the graphite phase,the Ce content is believed to be characterization of nodularization.Thegraphite would completely nodulized only the Ce is over a certain content in graphite phase.     

PREPARATION OF TiN FILMS BY N_2 ASSISTED Xe~+ ION BEAM ENHANCED DEPOSITION AND THEIR MECHANICAL PROPERTIES

A new method for preparation of hard TiN films has been developed by using electronbeam evaporation-deposition of Ti and bombardment with 40 keV Xe~+ ion beam ina N_2 gas environment.The synthesized TiN films were superior to PVD and CVDones in respects of improved adhesion to substrate and low preparing temperature.Theyexhibited good wear resistance and high hardness up to 2200 kg/mm~2.Some industrialapplications have been reported.