千米桥潜山构造特征及其在油气成藏中的作用

千米桥潜山是黄骅坳陷最典型的新生古储型油气藏，恢复潜山古构造是认识其油气藏特征的重点和难点之一，运用地质力学方法研究潜山内幕构造之后认为，该潜山的形成基础是古生界印支期宽缓复背斜，在燕山期挤压构造作用下形成由逆冲叠瓦扇和反冲断层构成的三角带内幕构造，抬升受侵蚀形成潜山主体，喜马拉雅的两次古旋拉张使潜山掀斜定型。晚第三纪以来发生整体热沉降，潜山两侧凹陷沙三段生成油气向潜山侧向运移成藏。     

α-蒎烯催化加氢反应的研究

以FYX - 2G型高压搅拌釜为加氢反应器 ,测定了在不同搅拌器型式和搅拌转速下高压釜的持气量和反应效果 ,认识到α 蒎烯催化加氢是外扩散控制的反应 ,当搅拌转速为 6 0 0r/min时 ,基本上能消除外扩散的影响。考察了Raney镍和Pd/C催化剂、反应温度在 35 3～ 499K ,压力在 4 0～ 10MPa的条件下对α 蒎烯加氢转化率和选择性的影响 ,结果表明Raney镍更适宜于α 蒎烯催化加氢 ,其转化率随温度、压力增加而提高 ,但选择性下降。采用温度 35 3～ 433K、压力 4 0～ 7 0MPa的操作序列 ,克服了α 蒎烯加氢转化率与选择性互为逆向的缺点 ,缩短了反应时间 ,制得了顺反比高达 18 2∶1的蒎烷 ,并且发现加氢反应从温度 433K开始有副产物对烷生成 ,当温度超过 45 6K时 ,加氢过程还出现飞温现象。     

重金属(以铅计)含量测定方法的改进

探讨了用硫化钠-丙三醇溶液代替饱和硫化氢水溶液进行重金属(以铅计)测定的分析方法。此法简单、快速,并在实际应用中取得了满意的结果。     

电算法在液压支架受力分析中的应用

建立支架受力分析的电算设计数学模型并给出程序框图     

微晶合金在电流互感器中的应用

从微晶合金的性能特点出发，分析了其在电流互感器中的应用前景。     

长距离钢带传动的张紧机构设计与应用

比较了几种长距离传动方式的特点与适用场合，重点探讨了实现长距离精密传动的技术要点。结合实际工程，完成了长距离钢带精密传动的应用，并指出张紧机构的设计与应用是钢带实现长距离精密传动的关键。为此文中对钢带传动的典型张紧机构进行了比较，并分析了这几类张紧机构的应用情况，有参考和应用价值。     

气液固三相相平衡热力学模型与计算方法

原油中含有大量的高分子有机固相物质，因此，要准确地描述油气体系相平衡，必须对气液固三相相平衡进行研究，在对高分子有机烃类沥青沉降机理有了一定的认识的基础上，提出了大的交互作用系数，可以描述沥青与原油中轻质不相容性的程度。根据对油气烃类混合物体系的一般性认识与提出的沥青组分特征化方法，导出了与之相应的有其自身特殊性的气液沥青三相相平衡物料平衡方程组，用考虑沥青沉降三相闪蒸数值算法，对沥青沉降进行有效的理化模拟计算，此外，结合实例分析，给出了沥青质参考逸度的计算，饱和压力和沉降量的拟合方法。     

Effects of extended dislocations on charge distribution in GaN epilayer

We have investigated the effect of extended dislocations (0.5-3 μm) on charge distribution in GaN epilayer grown by metalorganic chemical vapor deposition on (0001) sapphire using atomic force microscopy (AFM) and scanning surface potential microscopy (SSPM). It has been observed for the surface at the extended dislocations present in undoped GaN film to be negatively charged showing 0.04-0.2 V higher potential relative to regions that contain no dislocations. In addition to the higher potential at the dislocation core, the surrounding surfaces, including the edge of the dislocations, are also negatively charged in a symmetric way around the dislocations revealing crater-shaped higher potential regions (∼0.04 V) relative to surrounding dislocation-free area. The experimental results show that the protrusion-type of dislocation is also negatively charged and its potential is dependent on the size of dislocation.     

Impact of nonlinear phase noise on direct-detection DQPSK WDM systems

The performance degradation of differential quadrature phase-shift keying (DQPSK) wavelength-division-multiplexed (WDM) systems due to self-phase modulation (SPM)- and cross-phase modulation (XPM)-induced nonlinear phase noise is evaluated in this letter. The XPM-induced nonlinear phase noise is approximated as Gaussian distribution and summed together with the SPM-induced nonlinear phase noise. We demonstrate that 10-Gb/s systems, whose walkoff length is larger than 40-Gb/s systems', are more sensitive to XPM-induced nonlinear phase noise than 40-Gb/s systems. Furthermore, DQPSK WDM systems show lower tolerance to both SPM- and XPM-induced nonlinear phase noise than differential phase-shift keying WDM systems.     

EVOLUTIONARY ALGORITHMS WITH PREFERENCE FOR MANUFACTURING CELLS FORMATION

Due to the combinatorial nature of cell formation problem and the characteristics of multi-objective and multi-constrain, a novel method of evolutionary algorithm with preference is proposed. The analytic hierarchy process （AHP） is adopted to determine scientifically the weights of the sub-objective functions. The satisfaction of constraints is considered as a new objective, the ratio of the population which doesn＇t satisfy all constraints is assigned as the weight of new objective. In addition, the self-adaptation of weights is applied in order to converge more easily towards the feasible domain. Therefore, both features multi-criteria and constrains are dealt with simultaneously. Finally, an example is selected from the literature to evaluate the performance of the proposed approach. The results validate the effectiveness of the proposed method in designing the manufacturing cells.