基于Parlay X的下一代电信增值业务模型研究

Parlay X是一套简单易懂、比之Parlay在更高层次抽象电信网络基本功能的应用编程接口(API),它以Web Service的形式供IT应用开发者在开发的应用中调用电信网络功能.下一代网络业务的发展是一个渐进过程,对运营商来说,如何以更小的成本快速开发和部署新业务成了当务之急.文中介绍了Parlay X体系结构模型,着重提出了基于Parlay X的电信增值业务过渡模型,并对短信业务的开发流程进行了分析.     

DTD＆CSS编辑器的设计与实现

首先对DTD和CSS的语法规则进行了简单介绍，然后给出了一个对DTD和CSS进行语法分析和编辑的设计思路，最后给出了编辑器的实现效果以及对下一步工作的展望。     

Intermediate order in tetrahedrally coordinated silicon: evidence for chainlike objects

In this report, we describe the nature of intermediate order in silicon as determined by recent measurements on thin films using transmission electron microscopy (TEM) and Raman scattering. The TEM images show in addition to the expected continuous random network (CRN), the presence of highly ordered quasi-one-dimensional “chain-like objects” (CLO's) that are 1–2 nm wide and tens of nm long that meander and show some evidence of cross-linking with each other. The presence of these objects correlate to a Raman feature centered at 490 cm⁻¹ whose width is 35–40 cm⁻¹, and is used to quantify the heterogeneity in terms of the CLO and CRN (=475 cm⁻¹ scattering) concentrations. The 490 and 35 cm⁻¹ values are consistent with bond angle deviations approaching 0°, and thus reinforces an association with the CLOs. We find that in reference quality a-Si:H (made using pure SiH₄), the CLO concentration is about 5 vol%, while in state-of-the-art material using high H₂ levels of dilution during processing, it increases to about 15%. Increased stability of such material to light-soaking is thus not mediated by a direct volumetric replacement of poor with high-quality components. Rather, an important characteristic of intermediate order in silicon is the low-dimensional aspect of its order, which allows it to influence more total volume than which it is itself composed. Consistent with these and other recent findings, we propose a tensegrity model of amorphous silicon.     

论冶金企业节能管理员的技术要求

本文围绕冶金企业节能管理的工作内容和要求，论述了企业节能员应掌握的技术和提高技术途径。     

Role of hepatic resection in surgery for bilateral intrahepatic stones

The effect of phenylephrine-induced reflex parasympathetic stimulation on QT interval and its dispersion was studied in 16 healthy subjects with a history of paroxysmal supraventricular tachycardia, both during sinus rhythm and during atrial pacing. Results demonstrate that rapid reflex parasympathetic stimulation does not influence QT interval duration or QT dispersion, and also emphasize the inappropriateness of Bazett's formula, the need for comparison of QT intervals during identical heart rates, and the importance of analyzing all 12 leads of a standard electrocardiogram when assessing the effects of various interventions on the QT interval.     

利用钨极氩弧焊技术修复1#汽轮机转子的实践

本文主要介绍了我厂利用钨极氩弧焊将1#发电机组汽轮机转子修复的工艺过程.     

江苏省本地电话网结构与发展

分片汇接的网状网结构是江苏省本地电话网的基本框架,而汇接局和连接汇接局的传输系统则是网路规划与通信建设的重点。     

利用锁模光纤激光器做时钟提取器的OTDM通信系统

简短评述了大容量和超大容量光通信系统的ＷＤＭ和ＯＴＤＭ技术，提出了一个在ＯＴＤＭ通信系统中用锁模光纤激光器做时钟提取器的新方法，给出了一个利用设置波分预标时钟脉冲方案构成的新的全光型ＯＴＤＭ通信实验系统结构。     

深斜井永久式封隔器两种套铣方式风险分析与优化措施

在深斜井大修作业中,为了适应海上修井机作业能力的需要,需要处理井下永久式封隔器。采用磨铣方式处理难度大、周期长、费用高,因此通常采取套铣方式,仅将可钻式永久性封隔器卡瓦及密封套铣掉,再打捞回收或下推至人工井底,直至不妨碍下一步作业。从作业井实际情况出发,针对深斜井永久式封隔器,采用了两种不同动力驱动方式进行套铣处理:一种是地面转盘驱动,井下全部钻具都处于旋转状态,全程摩阻及扭矩大,可以施加较大钻压;另一种为井下马达驱动,即只有马达以下钻具旋转,而马达以上钻具不转,从而降低摩阻,但施加钻压较小,否则容易引起马达失速,所以对马达性能要求较高。通过套铣风险对比分析,分别对两种套铣钻具与参数进行了优化,提出了套铣成功与否的判断依据,为现场应用提供了借鉴。