一种基于小波变换与分形编码的新闻图片检索方法*

该方法使用户可以针对不同需要,准确高效地检索到所需的信息,并可根据需要确定所提取的信息数量。对图片进行小波变换,并分形编码,从而实现对图像特征的模糊分级检索,以完成对图片信息的高效管理。     

HIGH TEMPERATURE LOW CYCLIC FATIGUE BEHAVIOUR OF DIRECTIONALLY SOLIDIFIED Ni-BASE ALLOY DK3

研究了镍基定向凝固高温合金DK3和普通铸造合金K3在760℃应变控制和应力控制下的高温低周疲劳行为。结果表明:这两种合金的高温低周疲劳行为可以用常规的应力疲劳曲线来表征。DK3合金不存在“过渡疲劳寿命”N_T,K3合金则很低。在各种不同应变或应力水平下,DK3合金的低周疲劳寿命高于K3合金,当应力水平为785至980MPa时,其寿命约差1倍,当应力水平为490至685MPa时,则差2倍多。     

A STUDY OF THE SURFACE TREATED WITH SULF BT BY XPS

本文的XPS(X射线光电子能谱)结果揭示了,渗硫层中的主要成分并非为人们通常认为的仅是FeS(?)一种,而是FeS和FeSO_3两种,并且二者的相对含量基本相等。     

Analysis of Intermetallic Phases Formed on Surface Vapor Oxidized H13 Hot Work Steels in Molten Aluminum

In this paper, the author dipped surface vapor oxidized H13 steel specimens into 700℃ molten aluminum liquid for a certain period of time. Analyze the intermetallic phases formed on the H13 samples surface with optical microscope and X-ray diffraction method. The observation of immersion test sample's cross-section shows that Fe3O4 film will protect die substrate from molten aluminum erosion. The identification of the intermetallic phases reveals that they consist of 2parts, which is named as the composite layer and the compact layer. Further investigations are made in order to know the phase constituents of the 2 layers, they are Al8Fe2Si (outer composite layer), (AlCuMg) and Al5Fe2 (compact layer),respectively. The experimental results show that on the same specimen, a convex surface with bigger radius of curvature is more likely to be molten and the melting loss speed is also faster than a flat and smooth surface. The thickness of compact layer on a smooth surface is much bigger than that of the convex surface. Therefore, the author supposes the compact layer is favorable in stabilizing the die surface material from further melting loss, as their formation on the die surface, the melting loss speed will decrease.     

关于煤炭硫分分级的探讨

根据国家质量技术监督局的计划安排,国家标准GB／T15224－1994《煤炭质量分级》需要修订。本文主要讨论“煤炭硫分分级”方面的内容。     

容器焊缝错边残余应力与载荷应力的测定研究

本文对焊接容器错边和不错边的焊接接头进行了电测法的残余应力测试，确定了焊接残余应力的大小及方向，并在加载的条件下，对各焊接接头测点进行了综合应力测试，并给出了受载条件下的应力分布。     

PET熔体输送系统中熔体温度自动控制方案

在热媒温度控制系统中以熔体温度作为主参数,组成串极调节系统。投入运行后,熔体温度稳定,调节阀动作平稳,效果良好。     

一种基于多核嵌入式系统的TD-LTE同步校正方法

针对TD-LTE系统中同步性错误随机发生的问题,提出了一种通过ARM+DSP+FPGA平台的嵌入式系统实现帧号和原语的同步校正方法。该方法基于TD-LTE射频一致性测试仪表硬件平台,通过该嵌入式系统中ARM、DSP、FPGA间的协调工作,由GPMC模块通过帧号和原语两方面对系统同步性进行校正。在TD-LTE射频一致性测试仪表硬件平台中进行了验证,结果表明,该方法在实现帧号与子帧号同步校正的基础上明显提高了TD-LTE系统通信的稳定性。     

石蜡聚苯乙烯微球的制备

通过悬浮聚合技术合成了石蜡聚苯乙烯微球，研究了合成过程中引发剂浓度及交联剂用量对微球粒径及其分布的影响。