Al-Zn-Ce非晶合金的相选择与组织结构演化

本文研究了具有典型分解特征的Al-Zn-Ce非晶合金的形成和晶化过程，探讨了各种相的生成顺序。XRD和DSC测试结果表明强烈的化合物短程序有利于Al-Zn-Ce非晶合金的形成。在Al-Zn-Ce非晶合金的晶化过程中存在复杂的相选择行为，多种相的竞争形核和有限生长使其具有复杂的结构特点。同时，结果也表明冷速对该体系非晶的形成有很大影响。     

中铝河南分公司矿山在土地复垦中的有益探索

分析了铝土矿露天开采和土地、环境之间的利害关系，并对矿山公司“土地复垦”工艺技术进行了阐述，介绍了中铝河南分公司矿山公司方面的具体作法和成功经验。     

实践在马克思主义哲学理论中的意蕴——读《关于费尔巴哈的提纲》有感

马克思以实践为出发点和指导原则，创立了马克思主义哲学理论。正确理解和把握马克思主义实践哲学的科学意蕴，具有重要意义。     

Finite-element analysis and experimental study on tensile fatigue behaviour of bitumen–stone adhesion

Tensile fatigue behaviours of bitumen–stone adhesion were investigated using a dynamic mechanics analyser under stress‐controlled mode at two temperatures of 5 and 25°C and various controlled‐stress levels. Failure characteristics including interfacial failure and cohesive failure were examined using image analysis of fracture surfaces. Finite‐element analysis on stress distributions was conducted under different temperatures, film thickness and interfacial bonding conditions. A Coulomb–Mohr like criterion in combination with shear and normal stresses is proposed to deal with the extreme thin adhesive layer, which can be further simplified into an adhesive zone without significant loss of accuracy for stress analysis.     

中国首创五大新兴智能基础学科的交叉应用与展望

可拓学、灰色系统、界壳论、集对分析和消错学这五大新兴智能基础学科都是我国首创的理论。本文首先简单介绍了五大学科，随后给出了五大学科的关系矩阵并讨论了其交叉应用的发展概况，最后对其交叉所产生的空白领域追行了初步的探讨，然后对其未来发展进行了展望。     

控轧技术在H型钢生产中的应用

根据钢板的控轧经验，结合H型钢轧制的特点分析控轧在轧制中运用的具体问题，制定H型钢控轧工艺方案。介绍了实际应用情况，并提出改进的措施。     

Model of Primary Austenite Dendrite Structure in Hypoeutectic Cast Iron

Ｉｔｗａｓｒｅｐｏｒｔｅｄ[1] ｔｈａｔｔｈｅｍｉｃｒｏ ｓｔｅｒｅｏｓｔｒｕｃｔｕｒｅｏｆｐｒｉｍａｒｙａｕｓｔｅｎｉｔｅｉｎｃａｓｔｉｒｏｎｃｏｎｓｉｓｔｓｏｆｐｒｉｍａｒｙｓｔｅｍｓａｎｄｓｅｃｏｎｄａｒｙａｒｍｓｔｈａｔ ｇｒｏｗａｃｃｏｒｄｉｎｇｔｏｄｅｎｄｒｉｔｅｃｒｙｓｔａｌｓｂｒａｎｃｈｒｕｌｅ ,ａｎｄｓｏｍｅｏｆｐｒｉｍａｒｙａｕｓｔｅｎｉｔｅｅｖｅｎｈａｖｅｔｈｉｒｄａｒｍｓ .ＭｉｙａｋｅＨｅｔａｌ[2 ]ｐｒｏｐｏｓｅｄａｃｏｎｃｅｐｔｏｆｒｅｇｉｏｎｍｏｄｅｌｂｙｓｔｕｄｙｉｎｇ…     

四川马海毛钢花呢的试制

根据四川马海毛原料资源的品质特性，运用精纺粗做的方法，成功地试制出手感滑糯而富有弹性、光泽明亮悦目，各项物理指标符合FZ/T24002-93标准的四川马海毛纯毛钢花呢，达到了马海毛产品的特殊风格。同时指出四川马海毛制成率偏低。     

Plasma Sprayed Hydroxyapatite Coatings with Nano-hydroxyapatite Prepared by Ultrasonic Precipitation Process

Nano-particle hydroxyapatite （ HA ） was prepared with a novel ultrasonic precipitation process and the as-prepared nanopowder was used to produce hydroxyapatite （ HA ） coatings on titanium substrate via plasma spraying. The phase and the microstructare of the coating were characterized by X- ray diffraction （XRD） and scanning electron microscopy （SEM）. Results showed that spherical particles could be prepared by ultrasonic precipitation process; and a corresponding dense HA coating with molten surface and low-porosity cross-section structure was acquired. During the plasma spraying process, new phases of Ca3 （ PO4 ）2 and Ca2 P2O7 were generated. After heat-treating at 800℃ for 1 h, the contents of Ca3 （ PO4 ）2 and Ca2 P2O7 decreased while HA content increased. Tensile adhesion tests showed that the plasma sprayed coating prepared with the spherical nanoparticles exhibited high tensile bond strength.     

Hydrogen Permeation and Diffusion in Amorphous Alloy Ni_(68)Cr7_Si_8B_(14)Fe_3 at Elevated Temperature

The behaviour of hydrogen permeation and diffusion in amorphous alloy Ni68Cr7Si8B14Fe3 hasbeen investigated by an ultrahigh vacuum gas permeation technique. A comparison experimentwas carried out between the as-quenched and annealed States (400℃/2h) of the amorphousalloy. The results show that, for both states of the amorphous alloy in the temperature rangeof 200～350℃, the diffusivity and permeability of hydrogen are in agreement with Arrheniusrelationship, there does not exist H-trapping effect, and the activation energies of diffusion andpermeation almost keep the same.