Full-Scale Test of Continuity Diaphragms in Skewed Concrete Bridge Girders

Continuity diaphragms used in prestressed girder bridges on skewed bents have caused difficulties in detailing and construction. The results of the field verification for the effectiveness of continuity diaphragms for skewed, continuous, and prestressed concrete girder bridges are presented. The current design concept and bridge parameters that were considered include skew angle and the ratio of beam spacing to span (aspect ratio). A prestressed concrete bridge with continuity diaphragms and a skewed angle of 48° was selected for full-scale test by a team of engineers from Louisiana Department of Transportation and Development and the Federal Highway Administration. The live load tests performed with a comprehensive instrumentation plan provided a fundamental understanding of the load transfer mechanism through these diaphragms. The findings indicated that the effects of the continuity diaphragms were negligible and they can be eliminated. The superstructure of the bridge could be designed with link slab. Thus, the bridge deck would provide the continuity over the support, improve the riding quality, enhance the structural redundancy, and reduce the expansion joint installation and maintenance costs.     

An advanced VHDL‐AMS PiN diode model: towards simulation‐based design of power converters

This paper focuses on the modeling of a power PiN diode. The focal point basis is the dependence on temperature. The PiN diode remains a difficult device to model mainly during switching transients. An advanced PiN diode temperature‐dependent model is developed and implemented in VHDL‐AMS. Heterogeneous simulation scheme including the circuit wiring parasitic components, the probe effects and the dependent diode models is successfully simulated using SIMPLORER simulator. Experimental data of several commercial PiN diodes are compared to simulation results at different temperature levels. A good rate of consistency is found. Copyright © 2014 John Wiley & Sons, Ltd.     

Photofunctional Materials Based on Sheet Polymer Capped Organic Molecules for Visible‐Light‐Responsive Rewritable Paper

Journal of Inorganic and Organometallic Polymers and Materials - Historically, the recording of information over paper has always been regarded as the most important factor for maintaining records...     

Flux measurements for a DD neutron generator using neutron activation analysis

The fast and maximum thermal neutron fluxes from the DD-109 neutron generator at the University of Sharjah were experimentally measured by the activation technique using different neutron reactions. The thermal and fast neutron fluxes were found to be 2.960 × 10~6 and6.186 × 10~7 n/cm~2 s, respectively. This was done to verify the modeling results for the optimum moderator thickness needed to maximize the thermal neutron flux. The optimum moderator thickness was found to be between 3.5 and4 cm. The present data were compared with the detailed MCNP model-based calculation performed in earlier work to simulate the generator.     

Study of three‐dimensional natural convection and entropy generation in an inclined solar collector equipped with partitions

Three‐dimensional natural convection in an inclined solar collector equipped with partitions has been investigated numerically. The presence of partitions improves the performances of the collector by increasing the heat transfer near the absorber. A parametric study was done for various partitions length and Rayleigh numbers, while Prandtl number and inclination angle were fixed at 0.71 and 45°, respectively. Results are reported in terms of isosurfaces of temperature, isotherms, particles trajectories, velocity vector projection, average Nusselt number along the absorber plate and entropies generation contours.     

Bias voltage effect on the dielectric properties of organic–inorganic blend SiNWs elaborated via metal assisted chemical etching

The electrical proprieties of poly (3-hexylthiophene): Silicon nanowires (P3HT: SiNWs) nanocomposite was investigated by impedance spectroscopy technique. The effect of bias voltage under and without illumination was discussed. Indeed, the imaginary part of the impedance shows a high relaxation frequency related to Maxwell–Wagner–Sillars (MWS) polarization. The relaxation time was found in the range of ms and it was shifted towards high frequency with increasing the bias voltage especially at 0.6 V At bias voltage equal to V_th and under illumination, the conductivity increases because the trapped charges acquire the necessary energy to escape from the interface and the hopping time found was reduced. This indicates a change of the conduction mechanism. The Cole–Cole diagram was excellently fitted through an equivalent circuit including a chemical capacitance Cµ, a contact electrical resistance Rs and recombination resistance Rp.     

Two‐sided matching framework for optimal user association in 5G multi‐RAT UDNs

Recently, academic and industrial research communities are paying more explicit attention to the 5G multiple radio access technology ultra‐dense networks (5G multi‐RAT UDNs) for boosting network capacity, especially in UD urban zones. To this aim, in this paper, we intend to tackle the user association problem in 5G multi‐RAT UDNs. By considering the decoupled uplink/downlink access (DUDA), we divide our user association problem into two distinct subproblems representing, respectively, the uplink and the downlink channels. Next, we formulated each one as a nonlinear optimization problem with binary variables. Then, to solve them, we were restricted by the hard complexity, as well as the hard feasibility of centralized user association schemes. Thus, to resolve our user association problem in a reasonable time and distributed manner, we formulated each subproblem as a many‐to‐one matching game based on matching theory. Next, we provide two fully distributed association algorithms to compute the uplink and downlink stable matching among user equipments (UEs) and base stations (BSs). Simulation results corroborate our theoretical model and show the effectiveness and improvement of our achieved results in terms of the overall network performance, quality of service (QoS), and energy efficiency (EE) of UEs.     

Phenols,Flavonoids, and Antioxidant and Antibacterial Activity of Leaves and Stem Bark of Morus Species

Leaves and stem bark composition from Morus species (M. alba var. alba, M. alba var. rosa and M. rubra) was evaluated for its antioxidant and antimicrobial activities in order to enhance its therapeutic uses. Total phenolics and flavonoids contents were estimated in hydromethanolic and aqueous extracts. Results showed highest content in M. rubra leaves aqueous extract (1129 mg gallic acid equivalent/100 g dry weight and 816 mg gallic acid equivalent/100 g dry weight, respectively). Using 2,2-diphenyl-1-picrylhydrazyl assay, the highest antioxidant activity was obtained in aqueous stem barks extracts. M. alba var. alba has an IC₅₀ of 2.84 mg/ml and the IC₅₀ value of M. rubra was the highest (4.78 mg/ml). ABTS^.+ (2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)) method and reducing power assay were used to confirm the results from the 2,2-diphenyl-1-picrylhydrazyl test. All extracts expressed considerable free radical-scavenging properties. Hydromethanolic and aqueous extracts were tested against Staphylococcus aureus, Enterococcus feacalis, Staphylococcus epidermis, Escherichia coli, and Salmonella Typhimurium bacteria. Hydromethanolic stem bark extracts have the highest antimicrobial activities, and it may be a good antimicrobial agent for human gastrointestinal infections. This plant could be used as an additive to foods and also as a possible source to obtain new and effective herbal medicines to treat infections of multi-drug resistant strains of microorganisms.     

Microstructure and mechanical properties of CNT/Ag nanocomposites fabricated by spark plasma sintering

Carbon nanotube/silver (CNT/Ag) nanocomposites include CNT volume fraction up to 10?vol.% were prepared by chemical reduction in solution followed by spark plasma sintering. Multiwalled CNTs underwent surface modifications by acid treatments, the Fourier transform infrared spectroscopy data indicated several functional groups loaded on the CNT surface by acid functionalisation. The acid-treated CNTs were sensitised and activated. Silver was deposited on the surface of the activated CNTs by chemical reduction of alkaline silver nitrate solution at room temperature. The microstructures of the prepared CNT/Ag nanocomposite powders were investigated by high-resolution scanning electron microscopy (HRSEM), transmission electron microscopy and X-ray powder diffraction analysis. The results indicated that the produced CNT/Ag nanocomposite powders have coated type morphology. The produced CNT/Ag nanocomposite powders were sintered by spark plasma sintering. It was observed from the microstructure investigations of the sintered materials by HRSEM that the CNTs were distributed in the silver matrix with good homogeneity. The hardness and the tensile properties of the produced CNT/Ag nanocomposites were measured. By increasing the volume fraction of CNTs in the silver matrix, the hardness values increased but the elongation values of the prepared CNT/Ag nanocomposites decreased. In addition, the tensile strength was increased by increasing the CNTs volume fraction up to 7.5?vol.%, but the sample composed of 10?vol.% CNT/Ag was fractured before yielding.