Identification and quantification of phenolic acids and flavonol glycosides in Tunisian Morus species by HPLC-DAD and HPLC–MS

The total polyphenol and flavonoids in leaves of Morus alba var. alba, Morus alba var. rosa and Morus rubra were determined and identification of their components was carried out. The total content of phenolics varied between 345.20 and 631.53 mg gallic acid equivalents (GAE)/100 g dry weight (DW) basis. The total amount of flavonoids ranged between 193.87 and 398.33 mg rutin equivalents (RE)/100 g DW. Thirteen compounds were isolated by chromatography, and their structures determined to be mainly flavonol glycosides and phenolic acids. Three novel components were identified as kaempferol-7-O-glucoside, quercetin-3-O-β-glucoside-7-O-α-rhamnoside and quercetin-3-O-rhamnoside-7-O-glucoside, for the first time from mulberry leaves. Others known compounds were also identified.     

Nucleation and Growth of Anatase Crystallites on Cotton Fabrics at Low Temperatures

Anatase nanocrystalline titania coatings were produced on cotton fabrics from alkoxide solutions using a low-temperature sol–gel process under ambient pressure. Titania coatings of the anatase form were obtained via a classical hydrolysis and condensation reaction of titanium isopropoxide that was followed by a boiling water treatment for 180 min. Spectroscopic and microscopic characterizations of the titania thin films showed that the anatase form is predominant throughout the film after the boiling water treatment and that the size of the grains is about 20 nm. The titania coating on fabrics is a promising process for use as an antibacterial photocatalyst in the textile industry.     

Thermal and flammability properties of a silica–poly(methylmethacrylate) nanocomposite

PMMA, poly(metheylmethacrylate), nanocomposites were made by in situ radical polymerization of MMA, methylmethacrylate, with colloidal silica (ca. 12 nm) to study the effects of nanoscale silica particles on the physical properties and flammability properties of PMMA. Transparent samples resulted and the dispersity of the particles was examined by transmission electron microscopy and atomic force microscopy. The addition of nanosilica particles (13% by mass) did not significantly change the thermal stability, but it made a small improvement in modulus, and it reduced the peak heat release rate roughly 50%. Last, the flame‐retardant mechanism provided by the addition of nanosilica particles in PMMA is discussed. Published 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2072–2078, 2003     

Recent advances on ion-imprinted polymers

Selective recognition of metal ions is a real challenge for a large range of applications in the analytical field (from extraction to detection and quantification). For that purpose, ion-imprinted polymers (IIPs) have been increasingly developed during the last 15 years on the principle of molecularly imprinted polymers (MIPs). Those imprinted materials are designed to mimic the binding sites of biological entities and assure an improved recognition of the template species. The aim of this review is to give the current state of the art in the conception of IIPs from the components to the polymerization process. Some applications of those materials will be also discussed.     

Synthesis of Co3O4 @ Organo/Polymeric Bentonite Structures as Environmental Photocatalysts and Antibacterial Agents for Enhanced Removal of Methyl Parathion and Pathogenic Bacteria

Two green nanocomposites of Co₃O₄ decorated CTAB/bentonite (Co@CT/BE) and chitosan/bentonite (Co@CH/BE) were synthesized as enhanced and environmental photocatalysts and antibacterial agents. As photocatalysts, the products were applied in the effective oxidation of toxic methyl parathion pesticide (MP) in wastewater under a visible light source. The application of Co@CH/BE (0.02 g) resulted in the complete oxidation of MP (50 mg/L) after 40 min and complete mineralization after 60 min. while the complete oxidation and mineralization of MP (50 mg/L) by Co@CT/BE was recognized after 75 min and 100 min, respectively. The Co@CH/BE composite is of higher activity than Co@CT/BE and can cause complete oxidation for MP at high concentrations up to 100 mg/L after 75 min. The oxidation pathway was illustrated considering the existence of the hydroxyl radicals as the active oxidizing species and the identified secondary organic compounds during the oxidation tests. The detected intermediate converted into end products of CO₂ and inorganic anions of SO₄^?2, NO₃^?, and PO₄^?3 at the final stages of the oxidation processes. As antibacterial agents, the two composites exhibit considerable inhabitation zones of about 20 mm against both the Gram-positive Staphylococcus aureus and Gram-negative bacterium Vibrio Sp. The synthetic Co@CH/BE showed the best antibacterial properties with 200 μg/mL as minimum inhibitory against Staphylococcus aureus.

     

Correction to: Synthesis of Co3O4 @ Organo/Polymeric Bentonite Structures as Environmental Photocatalysts and Antibacterial Agents for Enhanced Removal of Methyl Parathion and Pathogenic Bacteria

Journal of Inorganic and Organometallic Polymers and Materials -     

Evaluation of Antioxidant Compounds and Total Sugar Content in a Nectarine [Prunus persica (L.) Batsch] Progeny

Epidemiological studies suggest that consumption of fruit rich in phenolic compounds is associated with health-protective effects due to their antioxidant properties. For these reasons quality evaluation has become an important issue in fruit industry and in breeding programs. Phytochemical traits such as total phenolics, flavonoids, anthocyanins, L-ascorbic acid, sugar content and relative antioxidant capacity (RAC) were analyzed over four years in flesh fruit of an F1 population "Venus" × "Big Top" nectarines. Other traits such as harvesting date, yield, fruit weight, firmness, soluble solids concentration (SSC), pH, titratable acidity (TA) and ripening index (RI) were also determined in the progeny. Results showed high variability among genotypes for all analyzed traits. Total phenolics and flavonoids showed significant positive correlations with RAC implying that both are important antioxidant bioactive compounds in peaches. We found genotypes with enhanced antioxidant capacity and a better performance than progenitors, and in consequence the best marketability.     

钛沉积工艺制备TiN/cBN和TiC/金钢石涂层颗粒(英文)

用钛熔盐沉积及热处理工艺分别制备碳化钛涂覆的立方碳化硼颗粒(TiN/cBN)及碳化钛涂覆的金刚石颗粒(TiC/金刚石)。将cBN或金刚石颗粒分别与钛粉和KCl、NaCl和K2TiF6熔盐混合。将所得混合物在Ar气氛中加热至900°C,然后在H2气氛中于1000°C进行热处理。采用扫描电镜、X射线衍射和聚焦离子束技术对所制得颗粒进行表征。结果表明:cBN和金刚石颗粒表面已覆盖了纳米钛层。对Ti/cBN和TiC/金刚石涂层颗粒进行热处理后,颗粒表面沉积的Ti层与cBN和金刚石颗粒发生了原位化学反应,分别转化为钛化合物TiN和TiC。     

Thermal degradation of high‐temperature fluorinated polyimide and its carbon fiber composite

High‐temperature polymers are being used for a broad range of applications, such as composite matrices for structural applications (e.g., high speed aircraft). Polyimides are a special class of polymers that meet the thermal and oxidative stability requirements for high temperature composite aerospace applications. A weight loss study was performed on a fluorinated polyimide resin and its carbon fiber composite in an effort to determine its thermal stability and degradation mechanisms. Experiments were conducted using a preheated oven and thermogravimetric analysis to obtain the weight loss. Regardless of the method used, the resin and composite exhibited excellent thermal stability (less than 1% weight loss) below 430°C, regardless of 2–20 min of exposure. After 20 min of exposure at 510°C, the composite remained relatively stable with only 5.3% weight loss using the oven technique, whereas the neat polyimide sustained 12.6%. When degradation occurred, it was found to be the result of thermolysis and oxidation (to a lesser extent). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Quantitative Proteomic Approach Reveals Altered Metabolic Pathways in Response to the Inhibition of Lysine Deacetylases in A549 Cells under Normoxia and Hypoxia

Growing evidence is showing that acetylation plays an essential role in cancer, but studies on the impact of KDAC inhibition (KDACi) on the metabolic profile are still in their infancy. Here, we analyzed, by using an iTRAQ-based quantitative proteomics approach, the changes in the proteome of KRAS-mutated non-small cell lung cancer (NSCLC) A549 cells in response to trichostatin-A (TSA) and nicotinamide (NAM) under normoxia and hypoxia. Part of this response was further validated by molecular and biochemical analyses and correlated with the proliferation rates, apoptotic cell death, and activation of ROS scavenging mechanisms in opposition to the ROS production. Despite the differences among the KDAC inhibitors, up-regulation of glycolysis, TCA cycle, oxidative phosphorylation and fatty acid synthesis emerged as a common metabolic response underlying KDACi. We also observed that some of the KDACi effects at metabolic levels are enhanced under hypoxia. Furthermore, we used a drug repositioning machine learning approach to list candidate metabolic therapeutic agents for KRAS mutated NSCLC. Together, these results allow us to better understand the metabolic regulations underlying KDACi in NSCLC, taking into account the microenvironment of tumors related to hypoxia, and bring new insights for the future rational design of new therapies.