诚信对兖矿资本运营的影响

1 诚信对兖矿资本运营的贡献1.1 在兖矿股票发行方面 1988年4月兖矿煤业在纽约、香港打响了上市的第一炮,这次兖州煤业全球发行8.2亿股,发行总收入折合人民币2.58亿元。可是当时的背景是亚洲金融危机爆发所带来的负面影响尚未完全消除,世界各地失信现象屡屡发生。活力28集团股份有限公司股票上市申报时虚增利润1667.7万元,上市后三年虚增利润21124.3万元,1998年公司在配股时公开披露国家股股东荆州市国资局以现金2320万元认购     

A study on the anodic protection of Titanium evaporators in Al2(SO4)3 solution

The feasibility of the anodic protection of titanium evaporators in Al₂(SO₄)₃ solution was studied by the measurement of polarization curves, weight loss, solubility of passive film and AC impedance. The protection parameters and efficiency were determined. In addition, the practical technology of anodic protection was studied by screening reference electrodes and auxiliary cathodes. Throwing power was also measured. Four rows of tube-type evaporators of titanium have been anodically protected in situ. Field tests lasting more than one year show satisfactory results.     

Three‐dimensionally braided carbon fiber–epoxy composites,a new type of material for osteosynthesis devices. I. Mechanical properties and moisture absorption behavior

In recent years, three‐dimensionally (3D) braided composites have attracted a great deal of attention because of their high‐impact damage tolerance and fatigue life, superior fracture toughness, and so forth, and have been used in aeronautics, military, and transportation. These advantages make them strong candidates for osteosynthesis devices. In this study, 3D braided carbon fiber–epoxy (C_3D/EP) composites were produced via a simple vacuum impregnation technique. The load‐deflection curve, mechanical properties, and influence of fiber volume fraction, braiding angle, and axial reinforcing fibers were examined to determine their suitability for internal fixation devices. It is found that the C_3D/EP composites have excellent toughness and do not show brittleness when fractured because of their relatively high void content. The flexural, shear, and impact strengths of the C_3D/EP composites are excellent. It was shown that a C_3D/EP composite with a stiffness similar to load‐bearing bones can be made while maintaining enough strength. It is concluded that a relatively higher void content and braiding angle is more suitable for the C_3D/EP composites from the viewpoint of requirements of fracture fixation materials. The moisture absorption behavior and changes in mechanical properties caused by moisture uptake were evaluated. Results show that absorbed moisture slightly decreases mechanical properties of the C_3D/EP composites. Contrary to the unreinforced epoxy, the moisture absorption behavior of the C_3D/EP composites cannot be described with Fick's law of diffusion, probably because of the presence of voids and/or 3D fiber structure. The exact mechanisms should be proposed in further investigations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1031–1039, 2002     

圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

塑钢包装箱材料贮存寿命预测

用热老化箱对4种塑钢包装箱用材进行了为期1个月的热老化试验，以材料的冲击强度作为判据指标，通过回归处理外推得到其常温下的贮存寿命预测评估结果。     

新抗生素B-3543的研究

对新抗生素B-3543进行了系统的研究,关键指标已达到工业化生产水平。确立了产生菌的分类地位,测定了抗生素的抗菌谱,获得效价达10000μg/ml的高产菌株,阐明了B-3543的化学结构,提出3种效价检定方法,制定了产品质量标准,完善了生产工艺,使产品总收率达60％。该项目还存在产品成本过高,产品稳定性不好等问题,有待研究解决。     

节理岩体的代表单元集合体模型及弹性参数预测

本文明确提出了节理岩体“代表单元集合体”的概念和模型，通过对节理岩体的“代表单元集合体”进行数值模拟，研究了节理岩体的“代表单元集合体”的变形特性，建立了节理岩体的弹性模型，提出了预测节理岩体宏观等效弹性参数的计算机模拟方法，并将其应用于岩体工程稳定性分析中。     

Influence of Al and Ni concentration on the Martensitic transformation in Cu-Al-Ni shape-memory alloys

The martensitic transformation temperatures and the types of martensitic phases have been determined in a wide concentration range of technological interest for Cu-Al-Ni shape-memory alloys (SMAs) A stability diagram of martensitic phases as a function of alloy concentration has been determined. It is found that when the aluminum content increases, the transformation changes from β ₃ ⇒ β′₃ to β ₃ ⇒ γ′₃, with an intermediate concentration range where both martensites coexist due to a β ₃ ⇒ γ′₃+β′₃ transformation. On the other hand, an increase of nickel content stabilizes the martensite β′₃, changing from a mixed β ₃ ⇒ γ′₃ + β′₃ to a single β ₃ ⇒ β′₃ transformation. Furthermore, linear relationships between M _s and Al and Ni concentrations have been obtained for all types of martensitic phases.