新型节能玻璃钢门窗的研究

本文主要围绕节能主题，从能耗方式、性能指标、结构形式、制作安装等方面论述了玻璃钢门窗在不同气候地区、不同环境和不同领域中的开发和应用。     

气化炉复合炉衬的传热计算

新型 (多喷嘴对置 )水煤浆气化炉拟采用水冷管和耐火浇铸料组成的复合炉衬结构 .炉内的高温高压对复合炉衬的高温侵蚀十分严重 ,是影响其寿命的重要因素 ,因此合理设计气化炉复合炉衬的结构对充分发挥其材质的作用具有十分重要的意义 .建立了气化炉复合炉衬的传热计算的数学模型 ,同时编制了模型求解的计算程序 ,并用某工艺条件对复合炉衬的温度分布进行了计算 .结果表明 ,该方法可有效计算出复合炉衬的温度分布情况 ,为复合炉衬的设计、运行和维护提供理论依据     

家电卷材涂料用HDI改性聚酯树脂的研制

以己二异氰酸酯（HDI）改性聚酯树脂与氨基树脂配制成家电用卷材涂料。阐述了氨酯键对涂膜性能的贡献。探讨了HDI用量对涂膜性能的影响。     

Evaluation of two cooling systems under a firefighter coverall

Firemen often suffer from heat strain. This study investigated two chest cooling systems for use under a firefighting suit. In nine male subjects, a vest with water soaked cooling pads and a vest with water perfused tubes were compared to a control condition. Subjects performed 30 min walking and 10 min recovery in hot conditions, while physiological and perceptual parameters were measured. No differences were observed in heart rate and rectal temperature, but scapular skin temperature and fluid loss were lower using the perfused vest. Thermal sensation was cooler for the perfused vest than for the other conditions, while the cool pad vest felt initially cooler than control. However, comfort and RPE scores were similar. We conclude that the cooling effect of both tested systems, mainly providing a (temporally) cooler thermal sensation, was limited and did not meet the expectations.     

用瞬时法测定液体导热系数

以珠状热敏电阻为加热元件,建立了用瞬时法测定液体导热系数的装置,在25℃下用乙二醇等7个标准样品,对该装置进行了标定,平均偏差为2%.为了核实装置和所得关系式的可靠性,又测定了13个已知导热系数的样品,多数偏差在2%以内,最大偏差为5%.单次测量的精度为0.2%.本文叙述了这一方法的原理,并对实验结果进行了讨论.     

Security concepts for the dynamics of autonomous vehicle networks

The secure operation of autonomous vehicle networks in the presence of adversarial observation is examined, in the context of a canonical double-integrator-network (DIN) model. Specifically, we study the ability of a sentient adversary to estimate the full network’s state, from noisy local measurements of vehicle motions. Algebraic, spectral, and graphical characterizations are provided, which indicate the critical role of the inter-vehicle communication topology and control scheme in achieving security.     

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Electron field emission characteristics of individual multi-walled carbon nanotubes (MWCNTs) were investigated in situ inside the transmission electron microscope (TEM). For a single MWCNT it was found that while field-emission can hardly occur from the side of the nanotube, a curved nanotube may result in finite side emission and the best emission geometry is the top emission geometry. Current-voltage (I-V) measurements made at different vacuum conditions and voltage sweeps emphasize the importance of the adsorbates on the electron field emission of MWCNTs. For a contaminated MWCNT, although the field emission current was reduced, the stability of its emission was improved. A current of up to several tens of μA was observed for a single MWCNT, but it was found that long time emission usually results in drastic structure damage that may lead to sudden emission failure.     

磷石膏的微量组分及其对水泥凝结、水化和硬化的影响

借助差热分析、热失重、X射线衍射和扫描电镜等测试手段,分析了磷石膏的微量组分,研究了磷石膏对硅酸盐水泥物理性能及水化过程和水化产物的影响,进而探讨了磷石膏对水泥单矿物的水化作用机理。     

Surface morphology and nodule formation mechanism of cellulose acetate membranes by atomic force microscopy

By the use of atomic force microscopy (AFM), formation mechanism of nodular structure in cellulose acetate membranes was systematically investigated. Elementary factors affecting the nodule formation were delineated on the basis of both kinetic and thermodynamic considerations. It was shown that (1) the exact nature of nodular structure is thermodynamic equilibrium glassy state; nodular structure will vanish in the rubbery state; (2) the thermodynamic factor affecting nodule formation is the membrane formation temperature; with the membrane formation temperature decreasing, more chain segments are able to form nodular structures; (3) nodule formation is dependent on the segment rearrangement; variation of the solvent environment is the major kinetic factor affecting the segment rearrangement and nodule formation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1328–1335, 2003