A PC-controlled microwave tomographic scanner for breast imaging

This article presents the design and development of a personal computer based controller for a microwave tomographic system for breast cancer detection. The system uses motorized, dual-polarized antennas and a custom-made GUI interface to control stepper motors, a wideband vector network analyzer (VNA) and to coordinate data acquisition and archival in a local MDSPlus database. Both copolar and cross-polar scattered field components can be measured directly. Experimental results are presented to validate the various functionalities of the scanner.     

Rigor, rigor mortis, and conspiratorial views of depression research.

The authors reassert the need for methodological changes in depression research appearing in the Journal of Personality and Social Psychology and other personality and social psychology journals. In this rejoinder the authors update their earlier literature review (H. Tennen, J. Hall, & G. Affleck; see record 1995-31710-001) and respond to the commentaries by P C. Kendall and E. C. Flannery-Schroeder (see record 1995-31700-001) and G. Weary, J. A. Edwards, and J. A. Jacobson (see record 1995-31713-001). The authors notice that G. Weary et al.'s own findings demonstrate the need to change how depression is measured and participants are assigned to experimental groups. The authors also challenge G. Weary et al.'s contention that structured interviews are limited because they require interviewer judgments, and they urge personality and social psychologists to learn more about these interviews. Finally, G. Weary et al.'s suspicion that depression research guidelines reflect professional parochialism is disputed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Measurement of the Inhomogeneity in Type B and Land–Jewell Noble-Metal Thermocouples

Inhomogeneity is the largest contributor to uncertainty in temperature measurements made with thermocouples, and the knowledge of inhomogeneity is essential if low-uncertainty measurements are required. Inhomogeneity is a particular problem for long-term applications at temperatures near or above 1500 \(^{\circ }\hbox {C}\), where pairs of alloyed noble-metal thermocouples must be used and the alloy components and potential contaminants become very mobile and cause large deviations in the Seebeck coefficient. While changes in inhomogeneity are a known and well-studied problem in noble-metal alloys at temperatures below 1100 \(^{\circ }\hbox {C}\), the effects are not well quantified at higher temperatures. This paper reports the first detailed measurements of inhomogeneity in a number of Type B and Land–Jewell thermocouples exposed to either short-term calibration up to 1600 \(^{\circ }\hbox {C}\) or long-term in situ measurements for a period of approximately 3000 h at 1600 \(^{\circ }\hbox {C}\). The inhomogeneity is measured in a high-resolution scanner operating over the range from 600 \(^{\circ }\hbox {C}\) to 900 \(^{\circ }\hbox {C}\). The results show that drifts of between 0.2 % and 0.6 % can be expected for reversible crystallographic and oxidation effects, whereas drift caused by irreversible contamination effects can be expected to be between 0.6 % and 1.1 %. It is also shown that the deviations in emfs caused by irreversible homogeneities in these thermocouples scale approximately linearly with temperature. This scalability allows uncertainties assessed at one temperature, to be extrapolated to other temperatures. Additionally it is shown that a preconditioning anneal at 1100 \(^{\circ }\hbox {C}\) should be applied both before and after calibration to remove undesirable crystallographic and rhodium-oxidation effects.     

Surface energy-mediated fibronectin adsorption and osteoblast responses on nanostructured diamond

Nanostructured diamond have potential applications in many biomedical related fields and demonstrated extraordinary capacity to influence cellular responses. Studying the surface property of nanodiamond and its influence to protein adsorption and subsequent cellular responses along with the mechanism behind such capacity becomes more important. Here the role of surface energy associated with nanostructured diamond in modulating fibronectin and osteoblast(OB, bone forming cells) responses was investigated. Nanocrystalline diamond(NCD) and submicron crystalline diamond(SMCD) films with controllable surface energy were prepared by microwave-enhanced plasma chemical vapor deposition(MPCVD) techniques. Fibronectin adsorption on the diamond films with varied surface energy values was measured via the enzyme-linked immunosorbent assay(ELISA) and the relationship between the surface energy and fibronectin adsorption was studied. The result indicated that fibronectin adsorption on nanostructured surfaces was closely related to both surface energy and material microstructures. The spreading and migration of OB aggregates(each containing 30–50 cells) on the NCD with varied surface energy values were also studied. The result indicates a correlation between the cell spreading and migration on nanodiamond and the surface energy of nanostructured surface.     

Pair breaking as a probe of d-wave high-temperature superconductivity

A unified picture is obtained of the Cooper pair-breaking data by Cu-site Zn and Ni in Nd_2–z Ce _z CuO₄, La_2–SrCuO₄, Bi₂Sr₂CaCu₂O₈, Bi_1.8Pb_0.2Sr₂Ca₂Cu₃O₁₀, YBa₂Cu₃O₇, and YBa₂Cu₄O₈. The data are generally inconsistent with spin-fluctuation d-wave pairing mechanisms of superconductivity and with all two-dimensional cuprate-plane models. The data are consistent with superconductivity in the charge reservoirs.     

Charge-transfer in YBa2Cu3Ox

The charge-transfer hypothesis is shown to be inconsistent with data for YBa₂Cu₃O_x: (i) The two-step behavior ofT _c(x) (with jumps from zero to 60 K and then to 90 K) is not reflected as a similar, statistically significant two-step behavior in the bond-valence-sum charge of cuprate-plane Cu ions (as once believed), (ii) as a consequence of the law of conservation of charge, the derivatives of the layer charges with respect to oxygen contentx for both the Ba-O layers and the charge-reservoir Cu-O chains have the opposite signs to those predicted, and (iii) the charge-transfer observed for superconducting YBa₂Cu₃O_x is not sufficient to produce superconductivity, as demonstrated by insulating PrBa₂Cu₃O_x, which has virtually the same layer charges.     

Temporary bond—debond technology for high‐performance transistors on flexible substrates

Abstract— A processing technology based upon a temporary bond—debond approach has been developed that enables direct fabrication of high‐performance electronic devices on flexible substrates. This technique facilitates processing of flexible plastic and metal‐foil substrates through automated standard semiconductor and flat‐panel tool sets without tool modification. The key to processing with these tool sets is rigidifying the flexible substrates through temporary bonding to carriers that can be handled in a similar manner as silicon wafers or glass substrates in conventional electronics manufacturing. To demonstrate the power of this processing technology, amorphous‐silicon thin‐film‐transistor (a‐Si:H TFT) backplanes designed for electrophoretic displays (EPDs) were fabricated using a low‐temperature process (180°C) on bonded‐plastic and metal‐foil substrates. The electrical characteristics of the TFTs fabricated on flexible substrates are found to be consistent with those processed with identical conditions on rigid silicon wafers. These TFTs on plastic exhibit a field‐effect mobility of 0.77 cm²/V‐sec, on/off current ratio >10⁹ at Vds = 10 V, sub‐threshold swing of 365 mV/dec, threshold voltage of 0.49 V, and leakage current lower than 2 pA/μm gate width. After full TFT‐array fabrication on the bonded substrate and subsequent debonding, the flexible substrate retains its original flexibility; this enables bending of the EPD display without loss in performance.     

A Monte Carlo Simulation approach for the modeling of free-molecule squeeze-film damping of flexible microresonators

Squeeze-film damping on microresonators is a significant damping source even when the surrounding gas is highly rarefied. This article presents a general modeling approach based on Monte Carlo (MC) simulations for the prediction of squeeze-film damping on resonators in the free-molecule regime. The generality of the approach is demonstrated in its capability of simulating resonators of any shape and with any accommodation coefficient. The approach is validated using both the analytical results of the free-space damping and the experimental data of the squeeze-film damping on a clamped–clamped plate resonator oscillating at its first flexure mode. The effect of oscillation modes on the quality factor of the resonator has also been studied and semi-analytical approximate models for the squeeze-film damping with diffuse collisions have been developed.