I-WAP: an intelligent WAP site management system

The popularity regarding wireless communications is such that more and more WAP sites have been developed with wireless markup language (WML). Meanwhile, to translate hypertext markup language (HTML) pages into proper WML ones becomes imperative since it is difficult for WAP users to read most contents designed for PC users via their mobile phone screens. However, for those sites that have been maintained with hypertext markup language (HTML), considerable time and manpower costs will be incurred to rebuild them with WML. In this paper, we propose an intelligent WAP site management system to cope with these problems. With the help of the intelligent management system, the original contents of HTML Web sites can be automatically translated to proper WAP content in an efficient way. As a consequence, the costs associated with maintaining WAP sites could be significantly reduced. The management system also allows the system manager to define the relevance of numerals and keywords for removing unimportant or meaningless contents. The original contents will be reduced and reorganized to fit the size of mobile phone screens, thus reducing the communication cost and enhancing readability. Numerical results gained through various experiments have evinced the effective performance of the WAP management system.     

Ceramers: Hybrid materials incorporating polymeric/oligomeric species with inorganic glasses by a sol-gel process

A sol-gel process has been successfully utilized to produce hybrid materials incorporating polymeric/oligomeric components of polydimethyl siloxane(PDMS) with silicon glasses. All the samples made were transparent and flexible. Dynamic mechanical studies indicate that a portion of the siloxane species is phase-separated while the remainder is well dispersed. The effect of acid content were proven to be significant on the dispersion of the siloxane components and on the structure and properties of final products.     

等离子体氧化nc-Si/SiO_2多层膜的蓝光发射

报道了在等离子体增强化学气相沉积 (PECVD)系统中用交替淀积 a-Si对其进行原位等离子体氧化的方法制备了 a-Si∶H/ Si O2 多层膜。随着 a-Si∶H子层的厚度从 3 .8nm减小到 1 .5 nm,a-Si∶H/ Si O2 多层膜的光吸收边和光致发光 (PL )出现了蓝移。在晶化的 a-Si∶ H/ Si O2 多层膜中不仅观察到室温下的红光带 (80 0nm)的发光峰 ,而且还观察到蓝光发射 (4 2 5 nm) ,结合 Raman,TEM和 PL测试 ,对其原因作了简单的分析     

矩形光脉冲光电响应后沿拖曳性状研究

本文对矩形光脉冲光电响应后沿拖曳的形成机制进行了详尽的实验研究和理论分析，认为形成该光电响应时滞后曳的主要根源在于光生电子与空穴的多声子慢态复合．我们给出了削减后沿拖曳、提高光电响应速度的有效措施，从而促进解决宽带光通讯的速度瓶颈问题．     

分布式制造动态调度资源集成系统建模

本文分析了分布式制造动态调度的本质，提出了对分布式制造资源集成系统的要求，并利用多A-gent理论对分布式制造资源集成系统进行建模，给出了系统集成的拓扑图和说明系统的信息流动过程，解决了构造分布式制造动态调度资源集成系统的理论基础。     

宽带抽运情况下乙醇、丙酮溶液中受激拉曼散射光谱的实验研究

研究了乙醇、丙酮两种拉曼介质在宽带抽运情况下啁啾激光脉冲的受激拉曼散射频谱特性 ,得到的一级Stokes光频谱宽度与抽运光基本相当 ,且具有较高的转换效率 ,从而表明了利用“展宽—受激拉曼散射—压缩”的办法获得波长近 1μm的飞秒级超短脉冲激光信号源的实验方案具有可行性     

多工况多级离心压缩机总体优化命题的建模与数值方法

介绍了多工况 点的压缩机最优模拟设计点的特点及相应的优化建模，包括目标函数的建立、约束条件的确立和计算方法，使满足该模拟设计点要求的压缩机在逼近优目标函数最大值的同时，兼顾各真实工况运行点都在较好效率下工作，并列出了基于模型级数据库的优化设计实例。     

多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。     

On-line learning delivery decision support system for highlyproduct mixed semiconductor foundry

A production learning system (PLS) based on the tool model was constructed as a decision support and real-time information update system to forecast the cycle time. A tool model includes a waiting model and a processing model. Each of the waiting and processing models uses a backpropagation neural network to establish the relationship between the input and output (time) of the model. Hence, cycle time estimation, tool group move and confirm line item performance (CLIP) value can be obtained based on the memory stored in the neural network. The result shows that the forecasting ability of the PLS has an error rate below 8% on average     

基于CPX8216硬件平台的GPRS板间切换的实现

GPRS全称通用分组无线业务,它在改进了现有GSM系统后能实现高速的数据传输。首先对GPRS系统做了简单介绍,然后在此基础上详细介绍了GPRS的板间切换在CPX8216硬件平台上的实现方法。