元宝山电厂快控汽门的研究与实施

在分析和介绍元宝山电厂和辽西电网情况的基础上，着重介绍了对元宝山电厂３００ＭＷ机组实施快控汽门的研究、试验工作及主要的技术成果。该厂３００ＭＷ机组快控汽门方式的投入，提高了电网稳定性和经济效益。     

大行程位移台干涉测距系统的误差补偿

双频激光干涉仪作为常用的精密光学非接触式测量设备,具有精度高、抗干扰能力强、灵活性好等优点。然而环境温度变化、机械振动等因素可能会影响其测量结果的准确性,并且影响程度会随着测量光程的增加而增大。针对基于双频激光干涉仪的大行程位移台测距系统,首先研究了位移台测距系统的测量原理,然后针对系统存在的各项误差进行了分析和补偿,最后,对系统进行综合误差补偿实验,短时间补偿量达到10^-8 m量级,且时间越长补偿效果越好。该方法较现有的误差补偿方法更为完整,补偿量更大。     

广东核电模拟机培训综述

本文通过大量的调查数据,概括了目前广东核电持照操纵员和高级操纵员的构成情况,如实地反映了模拟机培训的历史和现状,及良好实践.     

Milling process simulation for the variable pitch cutter based on an integrated process-machine model

Milling process simulations provide a useful way to design and adjust the technical parameters of milling process. As the milling process involves coupling     

基于ANSYS的有限元网格划分方法

使用ANSYS软件分析实体模型的过程中,有限元网格划分是至关重要的一步.首先简单介绍了ANSYS软件的使用范围和核心思想,然后介绍了网格划分的基本步骤.最后结合实例详细说明了网格划分不同方法的技巧.     

Realizing simultaneously enhanced energy and power density fullcell construction using mixed hard carbon/Li_4Ti_5O_(12) electrode

Practical applications of lithium-ion batteries(LIBs) with both high energy and power density are urgently demanded,which require suitable charge/discharge platform,fast charge-transfer kinetics,as well as optimal solid electrolyte interphase(SEI) layer of electrode materials.In this work,a high-performance lithium-ion battery(LIB) full cell was assembled by using commercial LiNi_(0.33)Co_(0.33)Mn_(0.33)O_2(NCM111) as the positive electrode and mixed Li_4 Li_5 O_(12)(LTO)/hard carbon(HC) as the negative electrode.It reveals that the component ratio between LTO and HC plays a critical role in manipulating the electric conductivity and the electro-reaction platform.The electrochemical test results show that when the content of HC is 10 wt%,the as-constructed full cell demonstrates the best electrochemical,with a maximum energy density of 149.2 Wh·kg~(-1) and a maximum power density of2195 W·kg~(-1) at 10 A·g~(-1)(30 C).This outperforms all the assembled systems within our work range and the state-ofthe-art literatures.The NCM//Li_4 Ti_5 O_(12)+10 wt% HC battery system also exhibits a good capacity retention after1000 cycles at the current density of 1 A·g~(-1).This work provides a new approach to enhance the full-cell performance by mixing electrode materials with different charge potentials and reaction kinetics.     

Atomic-layer-deposited Al2O3 and HfO2 on GaN: A comparative study on interfaces and electrical characteristics

Al₂O₃, HfO₂, and composite HfO₂/Al₂O₃ films were deposited on n-type GaN using atomic layer deposition (ALD). The interfacial layer of GaON and HfON was observed between HfO₂ and GaN, whereas the absence of an interfacial layer at Al₂O₃/GaN was confirmed using X-ray photoelectron spectroscopy and transmission electron microscopy. The dielectric constants of Al₂O₃, HfO₂, and composite HfO₂/Al₂O₃ calculated from the C-V measurement are 9, 16.5, and 13.8, respectively. The Al₂O₃ employed as a template in the composite structure has suppressed the interfacial layer formation during the subsequent ALD-HfO₂ and effectively reduced the gate leakage current. While the dielectric constant of the composite HfO₂/Al₂O₃ film is lower than that of HfO₂, the composite structure provides sharp oxide/GaN interface without interfacial layer, leading to better electrical properties.     

功率约束条件不同时下行相干CoMP传输异构网的性能

本文研究在异构网中进行相干协作多点传输时低复杂度迫零（ZF）预编码的性能。我们考虑在同构网中常用的低复杂度ZF预编码结构,即先进行ZF波束形成再进行功率分配,分析在采用和功率约束及单基站功率约束下使和数据率最大的功率分配时协作传输的性能,并与实际系统中常用的等功率分配的性能进行比较。分析结果表明,在异构网多载波系统中进行下行相干协作传输时,与在同构网中的结果不同,协作传输后单基站功率约束的性能远优于其他功率约束下的性能。但是,当协作的宏基站与微基站最大功率差别较大时,宏用户的性能在协作后甚至不如不进行协作传输,而微用户的性能会有所提高。这意味着在异构网中设计协作预编码时必须考虑单基站功率约束,而且不能只对功率分配进行优化设计。