Courtesy piggybacking: supporting differentiated services in multihop mobile ad hoc networks

Due to the salient characteristics such as the time-varying and error-prone wireless links, the dynamic and limited bandwidth, the time-varying traffic pattern and user locations, and the energy constraints, it is a challenging task to efficiently support heterogeneous traffic with different quality of service (CoS) requirements in multihop mobile ad hoc networks. In the last few years, many channel-dependent mechanisms are proposed to address this issue based on the cross-layer design philosophy. However, a lot of problems remain before more efficient solutions are found. One of the problems is how to alleviate the conflict between throughput and fairness for different prioritized traffic, especially how to avoid the bandwidth starvation problem for low-priority traffic when the high-priority traffic load is very high. In this paper, we propose a novel scheme named Courtesy Piggybacking to address this problem. With the recognition of interlayer coupling, our Courtesy Piggybacking scheme exploits the channel dynamics and stochastic traffic features to alleviate the conflict. The basic idea is to let the high-priority traffic help the low-priority traffic by sharing unused residual bandwidth with courtesy. Another noteworthy feature of the proposed scheme is its implementation simplicity: The scheme is easy to implement and is applicable in networks using either reservation-based or contention-based MAC protocols.     

甲基丙烯酸三氟乙酰氧乙酯的聚合

对甲基丙烯酸三氟乙酰氧乙酯(TFAOEMA)的阴离子聚合及原予转移自由基聚合进行了研究。常用的阴离于引发剂如丁基锂、1，1-二苯基已基锂等很难引发TFAOEMA的阴离子聚合，而碱性较弱的引发剂如三乙基铝却容易引发，且产率较高。以氯化亚铜、五甲基二乙基三胺、溴代丙酸乙酯为引发体系的TFAOEMA的本体原子转移自由基聚合符合活性聚合特征。但在四氢呋喃为溶剂的原子转移自由基聚合中却存在活性中心失活现象。以末端含卤素的聚甲基丙烯酸甲酯为大分子引发剂，引发TFAOEMA的原子转移自由基聚合，得到了含氟双嵌段聚合物。     

单晶高温合金DD3亚结构超细化定向凝固工艺研究EI

利用ＺＭ定向凝固装置研究了镍基单晶高温合金ＤＤ３在高温度梯度（７００～１２００Ｋ／ｃｍ）定向凝固条件下的微观组织演化特征及其对工艺参数的响应函数，结果表明：该合金在高界面温度梯度条件下，柱晶生长速度范围向高速区扩展，从而使单晶亚结构细化成为可能。所得单晶棒中亚结构一次间距可比传统ＨＲＳ法定向凝固籽晶中相应尺度减小５～１０倍。本文还对其组织演化机制进行了分析。     

部分种子成分的特征X射线在等效生物材料中衰减的测定

用Ｓｉ（Ｌｉ）探测器实现了Ｎａ、Ｍｇ、Ｓ、Ｃｌ的特征Ｘ射线在有机膜中的相对衰减以及与Ｏ、Ｋ元素的特征Ｘ射线能量相当的Ｘ射线或轫致辐射在有机膜中的相对衰减，分别得出了它们减的数学描述，并把实验得到不同能量的Ｘ射线在有机膜中的质量吸收系数与Ｂｅｒｋｅｌｅｙ的ＯＣＧ软件计算出的结果相比，相关都小于３０％。     

在湿陷性黄土地区对混凝土夯扩桩的检测

对夯扩桩在豫西湿陷性黄土地区的应用和可行性分析与检测。     

稀土混合物水溶液中囊泡的形成

依据柠檬酸的螯合作用和乙二醇的空间位阻效应，获得了稀土混合物囊泡。并利用ＩＣＰ、ＴＥＭ、ＦＳ等仪器对囊泡的性能进行了研究，最后对囊泡的形成机理进行了讨论。     

四维空间直线绕平面的旋转

本文对四维空间直线绕平面旋转的轨迹进行一投详尽的讨论，按照直线与“轴平面”的相对位置不同，该旋转轨迹分别为圆柱面、圆锥面和单叶回转双曲面，并认为这些回转曲面的轴线是过该直线的与“轴平面”垂直的超平面与“轴平面”的交线。     

无机添加剂的浓度及pH值对纺锤形α－Fe_2O_3晶貌的影响

本文以高浓度Ｆｅ３＋盐溶液为原料，采用沸腾回流的强迫水解法研究了无机添加剂浓度及反应液初始ｐＨ值对产物纺锤形α－Ｆｅ２Ｏ３晶貌的影响。结果表明，添加剂浓度和反应液初始ｐＨ值对纺锤形α－Ｆｅ２Ｏ３的轴比具有明显的影响，并且当添加剂浓度增加到一定值时，纺锤形α－Ｆｅ２Ｏ３出现解体。