宝钢2300 mm宽厚板连铸机扇形段的质量控制

扇形段是连铸机组中的主要设备,扇形段制造水平的高低将直接影响到板坯厚度的均匀性,对最终的钢板轧制质量起着十分重要的作用。阐述扇形段主要部件的质量控制。     

沸石孔结构对1-己烯异构化性能的影响

采用1-己烯为原料,对硅铝比相近、不同孔结构的沸石在脉冲微反装置上进行了评价试验,考察了FCC条件下沸石孔结构对烯烃异构化性能的影响。结果表明,大孔径的Y型沸石具有良好的异构化性能,异构化能力由强到弱的排列顺序为Y>β>ZRP>丝光沸石>镁碱沸石。     

A remark on inseparability of min-max systems

Min-max systems, or min-max-plus systems are algebraic models of discrete-event dynamic systems. They are nonlinear extensions of the well known linear max-plus system models. The structural property "inseparability" of min-max systems was proposed by us in a recent paper. It turns out that inseparability is equivalent to the property of "irreducibility" proposed recently by van der Woude and Subiono, although the two properties appear in very different forms. We will prove this fact here.     

基于遗传算法的优化排样

介绍了遗传算法以及二维不规则图形的计算机优化排样，研究了二维不规则图形排样中如何建立遗传算法的目标函数，如何实现交叉、变异运算等优化过程，找到了运用遗传算法实现二维不规则图形优化排样的方法。通过计算机编制了运用遗传算法进行二维不规则图形优化排样的运算程序，并对部分样形进行了优化排样，结果比较满意。     

CDMA发射分集系统的多用户检测常模算法分析

空时分集技术的最大优点在于在不增加带宽的情况下可以提高系统的可靠性,是目前移动通信的研究热点.常模算法是一种性能优良的码分多址(CDMA)盲多用户检测技术,能确保判决信号与实际传送信号之间的差错较小,误码率性能良好.文中提出将标准线性受限常模算法(LCCMA)与空时分组码(STBC)相结合,设计出一种收敛快、能够改善系统性能的基于2-空时分组码的多用户接收机.     

以寻呼区分析为基础的PHS网络优化方法

通过分析PHS网络中各寻呼区的统计指标,剖析指标劣化的根本原因,采取修改相应的参数配置、移站、调整天线等措施进行网络优化,优化实施后再次收集统计指标做对比分析,总结经验。     

Fatigue Behavior and Retrofit Investigation of Distortion-Induced Web Gap Cracking

This paper studies a Kansas Department of Transportation welded plate girder bridge that developed fatigue cracks at small web gaps close to the girder top flange. Repair had been previously performed by softening the connection plate end with a slot retrofit, but cracks were recently found to have reinitiated at some of the repaired details and are again propagating. A comprehensive finite-element method study was performed to investigate the cracking behavior observed in the bridge and to recommend appropriate measures for future bridge retrofit. The analytical results show that stresses developed at the top flange web gaps could exceed yielding under the loading of an HS15 fatigue truck. The current slot repair used in the bridge was found to have introduced higher magnitude fatigue stresses in the web gap. To achieve a permanent repair of the bridge, it is recommended that a welded connection plate to flange attachment be used during future bridge retrofit. The web gap details should be able to withstand unlimited number of load cycles once this additional repair is performed.     

自动线性跟踪Butterworth有源滤波器研究

滤波是通信、测试、数据采集和实时控制等领域至关重要的环节。通常的模拟滤波器，由于截止频率固定，在某些宽频率动态范围且有实时性要求的应用场合，往往达不到预期的滤波效果，有时甚至影响整个系统的正常运行。本文从有源滤波器的机理分析入手，提出了一种由单片机参与的滤波系统，它能自动跟踪输入信号频率，线性地选择合适的滤波器截止频率，弥补了原有滤波器的不足。     

逆向反射镜光度测量

为了正确评价逆向反射镜的加工质量与使用效果，且将二者有机地统一起来，本文提出应根据测试目的来选择合适的光度测量方法，并进一步分析了不同测试目的将导致测量装置的组成、几何条件（距离，孔径角，工作姿态等）、光度条件（光源色温、稳定性与均匀性，接收器线性、灵敏度与光谱修正等）、测量参数（反光强度系数、逆反射系数、逆亮度系数等）等各不相同。