All‐Carbon Nanotube‐Based Flexible Field‐Emission Devices: From Cathode to Anode

The fabrication of a flexible field‐emission device (FED) using single‐walled carbon nanotube (SWNT) network films as the conducting electrodes (anode and cathode) and thin multi‐walled CNT/TEOS hybrid films as the emitters is reported. P‐type doping with gold ions and passivation with tetraethylorthosilicate (TEOS) made the SWNT network film highly conductive and environmentally stable, and hence a good alternative to conventional indium tin oxide electrodes. CNT/TEOS hybrid emitters showed high current density, low turn‐on field, and long‐term emission stability, compared with CNT emitters; these characteristics can be attributed to the TEOS sol, acting both as a protective layer surrounding the nanotube tip, and as an adhesive layer enhancing the nanotube adhesion to the substrate. All‐CNT‐based flexible FEDs fabricated by this approach showed high flexibility in field emission characteristics and extremely bright electron emission patterns.     

High‐Performance Micro‐Solid Oxide Fuel Cells Fabricated on Nanoporous Anodic Aluminum Oxide Templates

Micro‐solid oxide fuel cells (μ‐SOFCs) are fabricated on nanoporous anodic aluminum oxide (AAO) templates with a cell structure composed of a 600‐nm‐thick AAO free‐standing membrane embedded on a Si substrate, sputter‐deposited Pt electrodes (cathode and anode) and an yttria‐stabilized zirconia (YSZ) electrolyte deposited by pulsed laser deposition (PLD). Initially, the open circuit voltages (OCVs) of the AAO‐supported μ‐SOFCs are in the range of 0.05 V to 0.78 V, which is much lower than the ideal value, depending on the average pore size of the AAO template and the thickness of the YSZ electrolyte. Transmission electron microscopy (TEM) analysis reveals the formation of pinholes in the electrolyte layer that originate from the porous nature of the underlying AAO membrane. In order to clog these pinholes, a 20‐nm thick Al₂O₃ layer is deposited by atomic layer deposition (ALD) on top of the 300‐nm thick YSZ layer and another 600‐nm thick YSZ layer is deposited after removing the top intermittent Al₂O₃ layer. Fuel cell devices fabricated in this way manifest OCVs of 1.02 V, and a maximum power density of 350 mW cm^?2 at 500 °C.     

Host-guest chemistry in the gas phase: selected fragmentations of CB[6]-peptide complexes at lysine residues and its utility to probe the structures of small proteins

The gas phase host-guest chemistry between cucurbit[6]uril (CB[6]) and peptide is investigated using electrospray ionization mass spectrometry (ESI-MS). CB[6] exhibits a high preference to interacting with a Lys residue in a peptide forming a CB[6]-peptide complex. Collisionally activated CB[6] complexes of peptides yield a common highly selective fragment product at m/z 549.2, corresponding to the doubly charged CB[6] complex of 5-iminiopentylammonium (5IPA). The process involves the formation of an internal iminium ion, which results from further fragments to an a-type ion from a y-type ion, and the resulting 5IPA ion threads through CB[6]. Numerous peptides are investigated to test the generality of the observed unique host-guest chemistry of CB[6]. Its potential utility in probing protein structures is demonstrated using CB[6] complexes of ubiquitin. Low-energy collision induced dissociation yields CB[6] complex fragments, and further MS(n) spectra reveal details of the CB[6] binding sites, which allow us to deduce the protein structure in the solution phase. The mechanisms and energetics of the observed reactions are evaluated using density functional theory calculations.     

Paper-based microfluidic surface acoustic wave sample delivery and ionization source for rapid and sensitive ambient mass spectrometry

A surface acoustic wave-based sample delivery and ionization method that requires minimal to no sample pretreatment and that can operate under ambient conditions is described. This miniaturized technology enables real-time, rapid, and high-throughput analysis of trace compounds in complex mixtures, especially high ionic strength and viscous samples that can be challenging for conventional ionization techniques such as electrospray ionization. This technique takes advantage of high order surface acoustic wave (SAW) vibrations that both manipulate small volumes of liquid mixtures containing trace analyte compounds and seamlessly transfers analytes from the liquid sample into gas phase ions for mass spectrometry (MS) analysis. Drugs in human whole blood and plasma and heavy metals in tap water have been successfully detected at nanomolar concentrations by coupling a SAW atomization and ionization device with an inexpensive, paper-based sample delivery system and mass spectrometer. The miniaturized SAW ionization unit requires only a modest operating power of 3 to 4 W and, therefore, provides a viable and efficient ionization platform for the real-time analysis of a wide range of compounds.     

Rehearsal and verbal reminders in facilitating compliance with safety rules

Accidents and incidents often occur, because a basic and seemingly simple rule is ‘forgotten’, either unintentionally (error, lapse) or with some degree of deliberate negligence (violation). The present experiment examined the utility of a rehearsal and a last-minute reminder in reducing the magnitude of deviations from an important safety rule by qualified, but relatively inexperienced pilots, specifically, remaining above an altitude of 500-ft. A single rehearsal flight entailing a search for a target on the ground increased the minimum altitude in later flights, but this positive effect did not completely generalize when the target on the ground was changed. These results suggest that the rehearsal flight was encoded in a context-specific manner. The addition of an explicit, last minute reminder about the mandated minimum altitude just before each test flight failed to significantly alter the pilots’ behavior. The results are discussed with respect to their theoretical and practical implications.     

Highly sensitive potentiometric strip test for detecting high charge density impurities in heparin

Contamination of heparin with oversulfated chondroitin sulfate (OSCS) became a matter of grave concern in the medical field after many fatal responses to OSCS tainted heparin products occurred during the 2007-2008 period. Even though standard lab-based analytical techniques such as nuclear magnetic resonance (NMR) and strong anion-exchange high performance liquid chromatography (SAX-HPLC) have proven useful for monitoring the OSCS content in heparin products, an easy-to-use, quick, portable, and cost-efficient method is still needed for on-site monitoring during and after the heparin production. In this report, a disposable strip-type electrochemical polyion sensor is described for detection of low levels of OSCS contamination in heparin. A magnetic actuator is incorporated into this simple electrode-based microfluidic device in order to create the mixing effect necessary to achieve equilibrium potential changes of the sensor within a microfluidic channel. The planar membrane electrode detector within the sample channel is prepared with a tridodecylmethylammonium chloride (TDMAC)-doped poly(vinyl chloride) (PVC) membrane essentially equivalent to previously reported polyanion-sensitive electrodes. When the concentration of heparin applied to the single-use strip device is 57 mg/mL (in only 20 μL of sample), the same concentration recommended in the NMR analysis protocol for detecting OSCS in heparin, the detection limit is 0.005 wt % of OSCS, which is ca. 20 times lower than the reported detection limit of the NMR method.     

In situ curing of sliding SU-8 droplet over a microcontact printed pattern for tunable fabrication of a polydimethylsiloxane nanoslit

A tunable process for polydimethylsiloxane (PDMS) nanoslit fabrication is developed for nanofluidic applications. A microcontact printing (μCP) of a laterally spreading self-assembled hexadecanethiol (HDT) layer, combined with in situ curing of a sliding SU-8 droplet, enables precise and independent tuning of a nanoslit-mold width and height using a single μCP master mold. The SU-8 nanoslit-mold is replicated using a hard-soft composite PDMS to prevent channel collapse at low (<0.2) aspect ratio (height over width). The fluidic characteristics as well as dimensions of nanoslits fabricated with various conditions are analyzed using a fluorescein sample and AFM images. Finally, concentration polarization-based sample preconcentration is successfully demonstrated at the nanoslit boundary where an electric double-layer is overlapped.     

Tolerance optimization of a mobile phone camera lens system

In the manufacturing process for the lens system of a mobile phone camera, various types of assembly and manufacturing tolerances, such as tilt and decenter, should be appropriately allocated. Because these tolerances affect manufacturing cost and the expected optical performance, it is necessary to choose a systematic design methodology for determining optimal tolerances. In order to determine the tolerances that minimize production cost while satisfying the reliability constraints on important optical performance indices, we propose a tolerance design procedure for a lens system. A tolerance analysis is carried out using Latin hypercube sampling for evaluating the expected optical performance. The tolerance optimization is carried out using a function-based sequential approximate optimization technique that can reduce the computational burden and smooth numerical noise occurring in the optimization process. Using the proposed design approach, the optimal production cost was decreased by 28.3% compared to the initial cost while satisfying all the constraints on the expected optical performance. We believe that the tolerance analysis and design procedure presented in this study can be applied to the tolerance optimization of other systems.     

Direct writing of semiconducting polythiophene and fullerene derivatives composite from bulk heterojunction solar cell by inkjet printing

The direct writing approach of poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) composite from bulk-heterojunction (BHJ) solar cell was efficiently addressed by inkjet printing technology using conventional chlorobenzene ink solution. The structure of inkjet-printed P3TH:PCBM BHJ film was fabricated by the repetitive direct writing of new line overlapped partially on former line. The best structure of P3HT:PCBM film for BHJ solar cell was observed from inkjet printing condition of around 50% of droplet overlaps with 2 wt.% BHJ ink at 25 °C of substrate temperature. The maximum power conversion efficiency reached 2.83% with an open circuit voltage of 0.62 V, a short circuit current density of 8.60 mA/cm², and a fill factor of 0.53 under air mass 1.5 G irradiation (100 mW/cm²).     

Molecular subtypes of Campylobacter spp., Salmonella enterica, and Escherichia coli O157:H7 isolated from faecal and surface water samples in the Oldman River watershed, Alberta, Canada

Campylobacter spp., Salmonella enterica, and Escherichia coli O157:H7 isolated from 898 faecal, 43 sewage, and 342 surface water samples from the Oldman River were characterized using bacterial subtyping methods in order to investigate potential sources of contamination of the watershed. Among these pathogens, Campylobacter spp. were the most frequently isolated from faecal, sewage, and surface water samples (266/895, 11/43, and 91/342, respectively), followed by Salmonella (67/898, 8/43, and 29/342, respectively), and E. coli O157:H7 (16/898, 2/43, and 8/342, respectively). Salmonella Rubislaw was the most common serovar isolated from water. This serovar was also isolated from two wild bird species. Most other serovars isolated from water were either not isolated from animals or were isolated from multiple species. E. coli O157:H7 was predominantly isolated from cattle. The most common phage-types of this pathogen from cattle were also the most common among water isolates, and there were exact pulsed field gel electrophoresis and comparative genomic fingerprint matches between cattle, sewage, and water isolates. Campylobacters were commonly isolated from surface waters and faeces from most animal species. Restriction fragment length polymorphism of the Campylobacter flaA gene identified several location and host species-specific (cattle, goose, pig) fingerprints. Molecular subtyping of these bacterial pathogens shows considerable promise as a tool for determining the sources of faecal pollution of water.