A flip-chip packaged 80-nm In0.7Ga0.3As MHEMT for millimeter-wave low-noise applications

In this paper, we present a flip-chip 80-nm In_0.7Ga_0.3As MHEMT device on an alumina (Al₂O₃) substrate with very little decay on device RF performance up to 60 GHz. After package, the device exhibited high I_DS = 435 mA/mm at V_DS = 1.5 V, high g_m = 930 mS/mm at V_DS = 1.3 V, the measured gain was 7.5 dB and the minimum noise figure (NF_min) was 2.5 dB at 60 GHz. As compared to the bare chip, the packaged device exhibited very small degradation in performance. The result shows that with proper design of the matching circuits and packaging materials, the flip-chip technology can be used for discrete low noise FET package up to millimeter-wave range.     

Assembly of Nanoparticle Patterns with Single‐Particle Resolution Using DNA‐Mediated Charge Trapping Technique: Method and Applications

We report a unique approach for producing one‐dimensional gold‐nanoparticle patterns with single‐particle resolution in which the linewidth is only limited by the particle size. In this approach, a focused electron beam was first utilized to generate a positive charge layer on a SiO₂ surface. Biotinated DNA molecules attracted by these positive charges were subsequently used to grasp Au‐nanoparticles revealing the e‐beam exposure patterns. Due to repulsive force between Au colloidal particles, the particles in the single‐line patterns were orderly separated. We further show that the single‐line patterns hold potential in nano‐photonics and nano‐electronics. For the latter, we demonstrate that the line patterns can serve as a template for conductive nanowires of high or low resistance. While low resistance wires showed linear current–voltage characteristics with an extremely high maximum allowed current density, the high resistance wires exhibited charging effect with clear Coulomb oscillation behavior at low temperatures. This demonstrates that the technique is capable of producing interconnects as well as single‐electron‐transistors, and opens up possibilities for fabrication of integrated circuits.     

A 24-GHz 3.9-dB NF low-noise amplifier using 0.18 /spl mu/m CMOS technology

A 24-GHz low-noise amplifier (LNA) was designed and fabricated in a standard 0.18-/spl mu/m CMOS technology. The LNA chip achieves a peak gain of 13.1 dB at 24 GHz and a minimum noise figure of 3.9 dB at 24.3 GHz. The supply voltage and supply current are 1 V and 14 mA, respectively. To the author's knowledge, this LNA demonstrates the lowest noise figure among the reported LNAs in standard CMOS processes above 20 GHz.     

A rate-distortion analysis on motion prediction efficiency and mode decision for scalable wavelet video coding

A rate-distortion model for describing the motion prediction efficiency in interframe wavelet video coding is proposed in this paper. Different from the non-scalable video coding, the scalable wavelet video coding needs to operate under multiple bitrate conditions and it has an open-loop structure. The conventional Lagrangian multiplier, which is widely used to solve the rate-distortion optimization problems in video coding, does not fit well into the scalable wavelet structure. In order to find the rate-distortion trade-off due to different bits allocated to motion and textual information, we suggest a motion information gain (MIG) metric to measure the motion prediction efficiency. Based on this metric, a new cost function for mode decision is proposed. Compared with the conventional Lagrangian method, our experiments show that the proposed method is less extraction-bitrate dependent and generally improves both the PSNR performance and the visual quality for the scalability cases.     

Secure Handover Authentication Protocol Based on Bilinear Pairings

Handover authentication protocol enables a mobile node to switch from one base station to another without loss or interruption of service when the node exits the transmission area of his or her current base station. This paper proposes a secure prime-order handover authentication protocol based on bilinear pairings. The proposed protocol adapts the concept of pseudonyms to provide user anonymity and user unlinkability. It withstands well-known security threats and achieves mutual authentication, user unlinkability. A batch signature verification mechanism to verify a mass of signatures is presented in our scheme. We also prove that our scheme is secure under random oracle.     

Mixed Broadcast Techniques of Leisure Information in Vehicular Ad-Hoc Networks

Telecommunication Systems - Vehicle-to-vehicle communication and probabilistic broadcast are important means for information dissemination in vehicular ad-hoc networks (VANETs). In contrast to...     

Nanoporous platinum counter electrodes by glancing angle deposition for dye-sensitized solar cells

We report an effective way to produce nanoporous Pt counter electrodes of dye-sensitized solar cells by the glancing-angle deposition (GLAD) technique. By controlling the orientation of the substrate relative to the incident Pt vapor flux during the deposition, nanoporous films composed of inclined nm-scale columns were produced through the self-shadowing effect. Pt counter electrodes having varied nanoporous structures were characterized for their morphological and electrochemical properties, and were subjected to device studies to establish the correlation with DSSC characteristics/performances. The results suggest that the nanoporous GLAD Pt electrodes can effectively enhance active surface areas, the catalytic ability and charge exchange at the Pt/electrolyte interface of a DSSC. As a result, the quantum efficiency, short-circuit current, and power conversion efficiency of the DSSC can be enhanced by up to 12–13% with using the nanoporous GLAD Pt counter electrodes.     

Understanding the relationship between intensity and gratifications of Facebook use among adolescents and young adults

Facebook is a well-known computer-mediated communication platform considered popular among adolescents and young adults. New media scholars have coined the term “intensity of Facebook use” (IFU) for the concept that measures the emotional and affective attitude towards Facebook use among young people. IFU is an important service use concept that has been positively linked with the different psychosocial outcomes of student well-being. However, only a limited amount of the prior literature has investigated the relationship between IFU and different Facebook uses and gratifications (U&G). The existing literature suggests inconsistent findings with a sole emphasis on young adults. To address these gaps, the present study has investigated the differential role of different Facebook U&G among adolescents and young adults in predicting IFU. A total of three cross-sectional data sets (N = 373, 107, 105) represented adolescents and university-attending young-adult Facebook users. The study results suggest that process U&G do and content U&G do not play any significant role in predicting IFU. Adolescents and young adults differ in their sought Facebook U&G. In addition to this, cultural differences were observed in the sought Facebook U&G and their differential role in predicting IFU.     

Characterization and modeling of static and cyclic relaxation in nonconductive adhesives

Adhesive interconnections are considered to be attractive alternatives to lead or lead-free solder interconnects because of their lower processing temperatures and extendability to fine pitch applications. However, reliability issues, such as moisture-induced delamination and viscoelastic relaxation of the adhesive in both steady-state and cyclic loading, continue to pose a challenge to widespread implementation. To date, the static and cyclic relaxation characteristics of nonconductive adhesives (NCAs) are yet to be understood. This paper attempts to provide insights into this static and cyclic relaxation behavior through experimental characterization and modeling. The viscoelastic property of a typical NCA material was characterized, and a simulation program with integrated circuit emphasis (SPICE) modeling program was used to model the cyclic relaxation behavior. The modeling results were successfully validated with a series of experiments. This showed that cyclic relaxation of the adhesive can be successfully modeled using linear-viscoelastic property. The phenomenon of slower relaxation of the adhesive under cyclic loading than that in static loading suggests that accelerated reliability testing used in solder-joint fatigue durability investigations may not be directly applicable to the adhesive interconnections. A rework methodology applicable to adhesive interconnects using cyclic loading has also been proposed.     

Electrodeposition of CuIn1−xGaxSe2 solar cells with a periodically-textured surface for efficient light collection

The photoresponse of CuIn_1?xGa_xSe₂ (CIGS) solar cells is improved using a periodically-textured structure as an antireflection layer. The CIGS absorber layers were prepared by one-step electrodeposition from an aqueous solution containing 12 mM CuSO₄, 25 mM In₂(SO₄)₃, 28 mM Ga₂(SO₄)₃, and 25 mM SeO₂. The electrodeposited CIGS films exhibit the (112)-preferred orientation of the chalcopyrite structures and feature improved film stoichiometry after the selenization process. In addition, the lower bandgap value of 0.97 eV is caused by the discrepancy of the reduction potentials for each constituent, resulting in insufficient Ga content in the deposited films. Using self-assembled silica nanoparticles as the etching mask, periodically-textured structures can be easily formed on an indium tin oxide (ITO)-coated soda lime glass to achieve a low average reflection (<10.5%) in a wide wavelength and incident angle range. With the periodic textured structures suppressing light reflections from the front surface, the photogenerated current in the semi-transparent CIGS solar cells made with transparent conducting electrodes is 1.82 times higher than they otherwise would be.