Case Study of an Aerosol Explosion and a Method to Determine Explosion Temperatures

A failure analysis case study is presented for a two-piece aerosol containing tetrafluoroethane, commonly referred to as Refrigerant 134a. A gentleman was preparing to recharge the air conditioning system of an automobile when the bottom exploded off the aerosol container, propelling the body of the aerosol container like a rocket, which hit the man in the eye and blinded him in that eye. The aerosol was never connected to the air conditioner, therefore backpressure from the air conditioner (AC) compressor was ruled out as a cause for the explosion. The objective of the study was to determine why the aerosol exploded. Several recently developed test methods were used, including two types of heat-to-burst tests and a puncture chamber to measure the pressure-versus-temperature behavior of aerosols. More common test methods were also used, such as water bath pressure tests, hydro pressure burst tests, pneumatic pressure burst tests, hardness measurements, weight measurements, metallography, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an accident scenario recreation. A semi-empirical correlation between the hardness and weights of the container bottoms was used to determine the explosion temperature and/or pressure. This semi-empirical correlation agrees in principle with an analysis of the explosion pressures using finite-element analysis (FEA). The root cause for the explosion was determined to be a lack of strength of the bottom of the two-piece aerosol coupled with heating the aerosol to temperatures significantly above room temperature.     

Kinetics of chlorination of tantalum pentoxide in mixture with sucrose carbon by chlorine gas

The mechanism and kinetics of β-Ta₂O₅ chlorination, mixed with sucrose carbon, have been studied by a thermogravimetric technique. The investigated temperature range was 500 °C to 850 °C. The reactants and reaction residues were analyzed by scanning electronic microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller method for surface area (BET). The effect of various experimental parameters was studied, such as carbon percentage, temperature, chlorine partial pressure, and flow, use of the multiple sample method, and carbon previous oxidation. The carbon percentage and previous treatment have an effect on the system reactivity. The temperature has a marked effect on the reaction rate. In the 500 °C to 600 °C temperature interval, the apparent activation energy is 144 kJ/mol of oxide, while at higher temperatures, the activation energy decreases. With high chorine partial pressures, the order of reaction is near zero. The kinetic contractile plate model, X=kt, considering carbon oxidation as the controlling stage, is the one with the best fit to the experimental data. A probable mechanism for the carbochlorination of β-Ta₂O₅ is proposed: (1) activation of chlorine on the carbon surface, (2) chlorination of Ta₂O₅, (3) oxidation of carbon, and (4) recrystallization of β-Ta₂O₅.     

Formal techniques for performance analysis: blending SAN and PEPA

In this paper we consider two performance modelling techniques from the perspectives of model construction, generation of an underlying continuous time Markov process, and the potential for reduction in the Markov process. Such careful comparison of modelling techniques allows us to appreciate the strengths and weaknesses of different approaches, and facilitates cross-fertilization between them. In the present case we take a characteristic of one formalism, functional rates in Stochastic Automata Networks, and introduce it to the other formalism, Performance Evaluation Process Algebra. We investigate the benefits of this cross-fertilization, particularly from the perspectives of Markov process generation and reduction.     

Simultaneous translation of lectures and speeches

With increasing globalization, communication across language and cultural boundaries is becoming an essential requirement of doing business, delivering education, and providing public services. Due to the considerable cost of human translation services, only a small fraction of text documents and an even smaller percentage of spoken encounters, such as international meetings and conferences, are translated, with most resorting to the use of a common language (e.g. English) or not taking place at all. Technology may provide a potentially revolutionary way out if real-time, domain-independent, simultaneous speech translation can be realized. In this paper, we present a simultaneous speech translation system based on statistical recognition and translation technology. We discuss the technology, various system improvements and propose mechanisms for user-friendly delivery of the result. Over extensive component and end-to-end system evaluations and comparisons with human translation performance, we conclude that machines can already deliver comprehensible simultaneous translation output. Moreover, while machine performance is affected by recognition errors (and thus can be improved), human performance is limited by the cognitive challenge of performing the task in real time.     

Safe and effective navigation of autonomous robots in hazardous environments

The development of autonomous mobile machines to perform useful tasks in real work environments is currently being impeded by concerns over effectiveness, commercial viability and, above all, safety. This paper introduces a case study of a robotic excavator to explore a series of issues around system development, navigation in unstructured environments, autonomous decision making and changing the behaviour of autonomous machines to suit the prevailing demands of users. The adoption of the Real-Time Control Systems (RCS) architecture (Albus, 1991) is proposed as a universal framework for the development of intelligent systems. In addition it is explained how the use of Partially Observable Markov Decision Processes (POMDP) (Kaelbling et al., 1998) can form the basis of decision making in the face of uncertainty and how the technique can be effectively incorporated into the RCS architecture. Particular emphasis is placed on ensuring that the resulting behaviour is both task effective and adequately safe, and it is recognised that these two objectives may be in opposition and that the desired relative balance between them may change. The concept of an autonomous system having “values” is introduced through the use of utility theory. Limited simulation results of experiments are reported which demonstrate that these techniques can create intelligent systems capable of modifying their behaviour to exhibit either ‘safety conscious’ or ‘task achieving’ personalities.     

Nanoscale research in South Africa: A mapping exercise based on scientometrics

This article reports the findings of a scientometric analysis of nanoscale research in South Africa during the period 2000–2005. The ISI databases were identified as the most appropriate information platform for the objectives of the investigation and have been interrogated for the identification of South African authors publishing in the field. The article identifies trends over time, major institutional contributors, journals in which South African authors publish their research, international collaborators and performance in comparison to four comparator countries (India, Brazil, South Korea and Australia). The major findings of the investigation are as follows: nanoscale research in South Africa is driven by individual researchers interests up to date and it is in its early stages of development; the country’s nanoscale research is below what would one expect in light of its overall publication output; the country’s nano-research is distributed to a number of Universities with subcritical concentration of researchers.     

Standardizing formats of corporate source data

This paper describe an approach for improving the data quality of corporate sources when databases are used for bibliometric purposes. Research management relies on bibliographic databases and citation index systems as analytical tools, yet the raw resources for bibliometric studies are plagued by a lack of consistency in fied formatting for institution data. The present contribution puts forth a Natural Language Processing (NLP)-oriented method for the identification of the structures guiding corporate data and their mapping into a standardized format. The proposed unification process is based on the definition of address patterns and the ensuing application of Enhanced Finite-State Transducers (E-FST). Our procedure was tested on address formats downloaded from the INSPEC, MEDLINE and CAB Abstracts. The results demonstrate the helpfulness of the method as long as close control of errors is exercised as far as the formats to be unified. The computational efficacy of the model is noteworthy, due to the fact that it is firmly guided by the definition of data in the application domain.     

Bibliometric analysis of tsunami research

The use of the bibilometric analytical technique for examining tsunami research does not exist in the literature. The objective of the study was to perform a bibliometric analysis of all tsunami-related publications in the Science Citation Index (SCI). Analyzed parameters included document type, language of publication, publication output, authorship, publication patterns, distribution of subject category, distribution of author keywords, country of publication, most-frequently cited article, and document distribution after the Indonesia tsunami. The US and Japan produced 53% of the total output where the seven major industrial countries accounted for the majority of the total production. English was the dominant language, comprising 95% of articles. A simulation model was applied to describe the relationship between the number of authors and the number of articles, the number of journals and the number of articles, and the percentage of total articles and the number of times a certain keyword was used. Moreover the tsunami publication patterns in the first 8 months after the Indonesia tsunami occurred on 26 December 2004 indicated a high percentage of non-article publications and more documents being published in journals with higher impact factors.