Electron transport in direct methanol fuel cells

A three-dimensional (3D), two-phase, isothermal model of direct methanol fuel cells (DMFCs) was employed to investigate effects of electron transport through the backing layer and the land in bipolar plates. It was found that the electronic resistance of the backing layer, affected by backing layer electronic conductivity, backing layer thickness and flow channel width, played a relatively important role in determining the current density distribution and cell performance. In order to ignore the electron transport effect on the average current density, the minimum electronic conductivity of the backing layer has to be 1000 S m⁻¹, with the relative error in the average current density less than 5%, under the given conditions.     

Effect of Heat Treatment on Microstructure and Mechanical Properties of Extruded PM Ti–6Al–4V Alloy With Deformation Flowlines

Metallurgical and Materials Transactions A - Two heat treatments, namely 955°C/2h/AC (AC = air cooling) and 955°C/4h/FC (FC = furnace cooling), were carried out on...     

Image super-resolution based on multi-space sparse representation

Sparse representation provides a new method of generating a super-resolution image from a single low resolution input image. An over-complete base for sparse representation is an essential part of such methods. However, discovering the over-complete base with efficient representation from a large amount of image patches is a difficult problem. In this paper, we propose a super-resolution construction based on multi-space sparse representation to efficiently solve the problem. In the representation, image patches are decomposed into a structure component and a texture component represented by the over-complete bases of their own spaces so that their high-level features can be captured by the bases. In the implementation, a prior knowledge about low resolution images generation is combined to the typical base construction for high construction quality. Experiment results demonstrate that the proposed method significantly improves the PSNR, SSIM and visual quality of reconstructed high-resolution image.     

Prediction-based realistic 3D model compression

The benefit of using the geometry image to represent an arbitrary 3D mesh is that the 3D mesh can be re-sampled as a completely regular structure and coded efficiently by common image compression methods. For geometry image-based 3D mesh compression, we need to code the normal-map images while coding geometry images to improve the subjective quality and realistic effects of the reconstructed model. In traditional methods, a geometry image and a normal-map image are coded independently. However a strong correlation exists between these two kinds of images, because both of them are generated from the same 3D mesh and share the same parameterization. In this paper we propose a predictive coding framework, in which the normal-map image is predicted based on the geometric correlation between them. Additionally we utilize the strong geometric correlation among three components of normal-map image to improve the predicting accuracy. The experimental results show the proposed coding framework improves the coding efficiency of normal-map image, meanwhile the realistic effect of a 3D mesh is significantly enhanced.     

音频大地电磁测深在某隧道工程中的应用

音频大地电磁(AMT)在隧道的工程地质勘察是一种非常有效的方法,它具有不受高阻屏蔽、轻便、探测深度相对较大等优点,在宏观上可以查明隧道地层岩性分界、地质构造及其赋水性。以某隧道音频大地电磁勘察为例,分别对AMT的采集手段、工频干扰去噪、静态校正、反演方法等关键技术问题进行分析,并结合实际资料对该工作区的地层分布、断层及其破碎带的赋水情况等进行分析和解释,在其应用中取得了理想的效果。     

高职类院校"嵌入式系统"教学思考

本文根据嵌入式系统的教学特点和高职类院校人才培养的目标,分析了高职类院校嵌入式系统教学的现状与特点、并对如何改进嵌入式教学现状、如何才能更好地培养出满足社会需求的高素质嵌入式技术人才提出了几点建议.     

光纤电流互感器渐变性故障时频特征辨识

通过时频变换方法分解光纤电流互感器(FOCT)输出信号,获取渐变故障信号特征,是故障分析的关键步骤。针对FOCT渐变性故障信号时域跨度大且劣化过程呈随机性的特点,对输出信号进行跨间隔采样,利用小波包分解算法,根据故障信号频段实现故障信号特征提取,利用相关评价指标对时域特征参数进行筛选,得到表征FOCT劣化趋势的最优特征参数。针对信号特征维度高的特点,提出主元分析法对高维特征降维处理,满足故障特征辨识快速性的需求。实验结果表明：使用6层小波包分解算法,得到64个包含不同频段信号的子序列,对比各个频带能量占比来确定互感器运行状态,能够实现有效辨识渐变性故障特征。     

在线自学与考试系统的设计

本文将现有的在线自学与在线考试系统相结合,设计出一个具备教学与测试的完整的学习系统,并实现学习者学习进度记录、进度相互比较及经验交流等功能,使学习者在学习过程中并不孤独。     

A high strength Mg-6Zn-1Y-1Ce alloy prepared by hot extrusion

Microstructures and tensile properties of Mg-6Zn-1Y-1Ce alloy extruded in a temperature range between 300 °C and 400 °C were investigated. The yield strength of the material increased as the extrusion temperature decreased due to grain refinement. The yield strengths and grain sizes of extruded samples met Hall-Petch equation. The microstructure of the alloy extruded at 300 °C had a bimodal grain size distribution with an average grain size of 2.7 μm and showed a yield strength of 327 MPa with an elongation of 9%. The fine-grained microstructures were attributed to the dynamic recrystallization and the pinning effect of fine strengthening particles.     

三坐标测量机的误差分析及其补偿

应用坐标变换理论分析了三坐标测量机的仪器误差，提出了对三坐标测量机的误差进行软件补偿的方法，并作了二维坐标测量误差补偿的验证．