加氢装置加热炉易爆管部位的分析

重点介绍韩国蔚山炼油厂分馏塔底重沸炉火灾事故、中国石油化工股份有限公司洛阳分公司催化裂化柴油加氢装置反应进料加热炉火灾事故、茂名分公司渣油加氢脱硫装置分馏炉火灾事故、镇海炼油化工股份有限公司加氢裂化装置脱丁烷塔底重沸炉火灾事故的情况,找出加氢装置加热炉的易爆管部位,并通过分析总结,提出了易爆管部位的选材原则、设计改进方案及维护措施.     

EDTA interfacial chelation Ca2+incorporates superhydrophobic coating for scaling inhibition of CaCO3 in petroleum industry

In this paper,the superhydrophobic poly(vinylidene fluoride)/fluorinated ethylene propylene/SiO2/CNTs-EDTA(PFSC-EDTA)composite coating was successfully fabricat...     

基于柯氏熵的汽车发动机状态预测的可行性研究

由于非线性系统存在长期不可预测性，基于此，建立了基于时间序列的柯尔莫哥洛夫熵求解方法，并利用柯尔莫哥洛夫熵求取了复杂机械系统状态的最大可预测的点数。这一研究为确立复杂设备状态预测的可信区间提供了理论支持，所获得的方法为复杂机械系统状态预测的可预测时间的界定提供了行之有效的技术方法。     

Torsion sensor based on two cascaded long period fiber gratings fabricated by CO2 laser pulse irradiation and HF etching technique respectively

A novel torsion sensor is proposed, which is composed of one long period fibre grating and one asymmetrically corrugated long period fibre grating based on the high-frequency CO₂ laser pulses technology and burning fibre coating and etching cladding technology, respectively. By combing the advantages of the two aforementioned elements, a sensitivity of 331.7 and 310.3 pm/(rad/m) towards clockwise and anticlockwise direction, respectively, is reached in the experiments.     

CAD在三坐标测量机中的应用

近几年各个三坐标测量软件开发厂商相继在自己的软件中加入了CAD功能,且功能越来越强大。本文就CAD在三坐标测量软件中的使用和其功能作简要阐述。     

尖晶石相型LiM_(0.2)Mn_(1.8)O_4(M=Mg、Cd)相的晶格畸变与红外吸收峰频移

通过室温固相法制备了不同元素掺杂的前驱体,并采用分步煅烧法获得了尖晶石型LiMn2O4和LiM0.2Mn1.8O4(M=Mg、Cd)相。采用XRD和FTIR技术就元素掺杂对产物晶格畸变、Mn—O键长和键能强度等微观结构参数和光谱频移现象进行分析。结果表明,不同元素掺杂导致产物产生不同程度的晶格畸变。Mg元素掺杂使晶格收缩,Mn(Ⅳ)—O和Mn(Ⅲ)—O键收缩和键能强度增加,对应吸收峰发生蓝移;Cd元素掺杂使晶格膨胀,Mn(Ⅳ)—O和Mn(Ⅲ)—O键增长和键能强度降低,对应吸收峰发生红移。     

An efficient second‐order characteristic finite element method for non‐linear aerosol dynamic equations

In the paper we consider the non‐linear aerosol dynamic equation on time and particle size, which contains the advection process of condensation growth and the process of non‐linear coagulation. We develop an efficient second‐order characteristic finite element method for solving the problem. A high accurate characteristic method is proposed to treat the condensation advection while a second‐order extrapolation along the characteristics is proposed to approximate the non‐linear coagulation. The method has second‐order accuracy in time and the optimal‐order accuracy of finite element spaces in particle size, which improves the first‐order accuracy in time of the classical characteristic method. Numerical experiments show the efficient performance of our method for problems of log‐normal distribution aerosols in both the Euler coordinates and the logarithmic coordinates. Copyright © 2009 John Wiley & Sons, Ltd.