From Long Infrared to Very Long Infrared Wavelength Focal Plane Arrays Made with HgCdTe n + n ?/ p Ion Implantation Technology

This paper aims at studying the feasibility of very long infrared wavelength (VLWIR) (12–18 μm) focal plane arrays using n-on-p planar ion-implanted technology. To explore and analyze the feasibility of such VLWIR detectors, a set of four Cd _x Hg_1−x Te LPE layers with an 18 μ cutoff at 50 K has been processed at Defir (LETI/LIR–Sofradir joint laboratory), using both our “standard” n-on-p process and our improved low dark current process. Several 320 × 256 arrays, 30-μm pitch, have been hybridized on standard Sofradir readout circuits and tested. Small dimension test arrays characterization is also presented. Measured photonic currents with a 20°C black body suggest an internal quantum efficiency above 50%. Typical I(V) curves and thermal evolution of the saturation current are discussed, showing that standard photodiodes remain diffusion limited at low biases for temperatures down to 30 K. Moreover, the dark current gain brought by the improved process is clearly visible for temperatures higher than 40 K. Noise measurements are also discussed showing that a very large majority of detectors appeared background limited under usual illumination and biases. In our opinion, such results demonstrate the feasibility of high-performance complex focal plane arrays in the VLWIR range at medium term.     

The impact of roasting on the ochratoxin A content of coffee

Roasting coffee led to a drop in the ochratoxin A (OTA) concentration, as measured by the reference method, especially for dark type roasts. The way the beverage was prepared also affected the OTA content, which could paradoxically be higher than that of the initial roasted coffee. Assays on the thermal stability of pure OTA showed that it ought to be found in larger quantities in roasted coffee. This suggested that OTA was masked by reactions with the substrate during roasting. The absence of OTA in green coffee is therefore the best guarantee of safety.     

A Nonvolatile Organic Memory Device Using ITO Surfaces Modified by Ag‐Nanodots

We report on a single‐layer organic memory device made of poly(N‐vinylcarbazole) embedded between an Al electrode and ITO modified with Ag nanodots (Ag‐NDs). Devices exhibit high ON/OFF switching ratios of 10⁴. This level of performance could be achieved by modifying the ITO electrodes with some Ag‐NDs that act as trapping sites, reducing the current in the OFF state. Temperature dependence of the electrical characteristics suggest that the current of the low‐resistance state can be attributed to Schottky charge tunnelling through low‐resistance pathways of Al particles in the polymer layer and that the high‐resistance state can be controlled by charge trapping by the Al particles and Ag‐NDs.     

A review on queueing network models with finite capacity queues for software architectures performance prediction

A review is carried out on how queueing network models with blocking have been applied so far into the performance evaluation and prediction of Software Architectures (SA). Queueing network models with finite capacity queues and blocking have recently been introduced and applied as more realistic models of systems with finite capacity resources and population constraints. Queueing network models have been often adopted as models for the evaluation of software performance. Starting from our own experience, we observe the need of a more accurate definition of the performance models of SA to capture some features of the communication systems. We consider queueing networks with finite capacity and blocking after service (BAS) to represent some synchronization constraints that cannot be easily modeled with queueing network models with infinite capacity queues. We investigate the use of queueing networks with blocking as performance models of SA with concurrent components and synchronous communication. Queueing theoretic analysis is used to solve the queueing network model and study the synchronous communication and performance of concurrent software components. Our experience is supported by other approaches that also propose the use of queueing networks with blocking. Directions for future research work in the field are included.     

Development of a fuzzy decision model for manufacturability evaluation

A manufacturability evaluation decision model is formulated and analyzed based on fuzzy logic and multiple attribute decision-making under the concurrent engineering environment. The study emphasizes on the treatment of the linguistic and vagueness at the early product development stage. The study also considers the function integration of the total life cycle of a product. Hence, the integrated decision model covers the multi-level, multi-goal requirements of the products. Multiple criteria such as the goal space, the decision space, the function space, the development (i.e., product & process design) space, and the activity space, are then applied under different analysis of decision-making methods. For instances, the fuzzy multiple attribute decision-making (FMADM) combined with activity-based costing (ABC) can be used in the activity decision space. The fuzzy logic decision model can be applied in the goal decision space. The results of this study point out the importance of early decision making capability. An example of a high-pressure vessel is provided to demonstrate the proposed model for evaluating the manufacturability.     

Cooling of cylindrical vertical tanks submitted to natural internal convection

A numerical and an experimental analysis of velocity and temperature fields inside a storage tank submitted to natural convection is presented. The analysis was performed in two stages. In the first stage, the temperature profile along the vertical axis of the storage tank was obtained experimentally and numerically, for cooling time ranging from 45 to 60 h. The numerical analysis was carried out using a transient bi-dimensional model in cylindrical co-ordinates. In the second stage, after the numerical code validation, 40 cases of cooling with four aspect ratios, five insulation thicknesses, and two different volumes were simulated. In all simulations, thermal losses for the environment in all tank walls (side, top and bottom) were considered. Two correlations for the Nusselt number, encompassing all the forty cases, were obtained with these results.     

Algorithms for determining planar area properties from peripheral points

The determination of planar properties—cross sectional areas, centroids, moments of inertia, and so forth—plays a central role in the solution of many diverse engineering problems. Despite the increasing availability of computational power to engineers and students alike in recent years with the advent of small desktop computers, however, the traditionally laborious and error-prone methods of making these determinations, involving area decomposition or strip integration, are still being taught to the present generation of engineering students, mostly due to a lack of suitable alternative techniques. These classical methods are found to be particularly difficult to adapt to general computational algorithms. This work presents a novel approach, requiring only the peripheral points of any planar area as inputs, and is ideally suited for numerical methods. It is shown that all planar properties of technical interest can be generated, once and for all, with straightforward algorithms that are readily programmed in any scientific computing language, or adapted to typical spreadsheet formats. These algorithms are fully general and require no decision-making on the part of the user. Various worked examples are presented.