Elastic and plastic contributions to X-ray Line broadening of InGaAsP/InP Heterostructures

The coherency state of MOCVD grown InGaAsP/InP double-heterostructure wafers was examined and their effects on the structural properties were determined in this study. Lattice mismatches were measured using {511} asymmetric and (400) symmetric x-ray reflections. The chemical lattice misfit and the elastic strain were also calculated. Misfit dislocations were examined by both x-ray topography and photoluminescence imaging. The x-ray full width at half maximum (FWHM) varied with the degree of mismatch. The largest FWHM was obtained for samples containing the misfit dislocations. It was found that FWHM is influenced not only by the plastic deformation, but also by the elastic strain. To model the dependence of the FWHM, the radius of curvature was measured, and its contribution to the x-ray line broadening was calculated. Also, the contribution from misfit dislocations was taken into account. This model assumes that the dislocations are planar and interact weakly with each other. Good agreement between measured and calculated values was obtained. Thus, it is concluded that the major contribution to x-ray line broadening ofelastically strained sample is the lattice curvature induced by misfit strain, and that the dominant factor affecting x-ray FWHM ofplastically deformed sample is lattice relaxation induced by misfit dislocation.     

Grain nucleation and texture analysis of electroless copper deposition on a palladium seed layer

Electroless copper grains were deposited on a Pd seed layer under varying bath conditions. The seed layer was determined to have a (111) texture using grazing incident x-ray (GIX) diffraction. Multiple nucleation sites in the grain boundaries were imaged using a scanning tunneling microscope. Continual copper growth produced row-like structures. The texture of the electrolessly deposited copper (ED-Cu) grains were determined to be (111). No radial grain orientation for the Pd seed layer or the ED-Cu thin film was detected using GIX diffraction. Atomic force microscope images indicated continual Cu nucleation throughout the deposition process. PdH was formed as a by-product of the electroless deposition process, and detected by x-ray diffraction.     

Engine autoignition: The relationship between octane numbers and autoignition delay times

The research octane (RON) and motor octane (MON) numbers, carefully measured in standardized tests, are the principal parameters for characterizing autoignition of gasoline in engines. Increasingly, engines operate under different conditions of temperature, pressure, and mixture strength from those in these tests. As a result, RON and MON values become an incomplete guide to the onset of knock, and the octane index (OI), an octane number under operational conditions, is often measured. Values of the OI were measured with different fuels in a controlled autoignition single-cylinder engine, at different initial temperatures and pressures, at the instant of 10% heat release. Fundamental understanding of engine autoignition was sought by finding the OIs of different non-primary reference fuels (non-PRFs) by identifying the corresponding PRFs that give 10% heat release under identical conditions. The autoignition delay times of the PRFs were obtained from the shock tube data, for different temperatures and pressures, of the Aachen group. It was sufficiently accurate to equate the delay time of a non-PRF to that of the corresponding PRF under the same conditions for 10% heat release. The PRFs exhibited a higher value of the inverse pressure exponent for the delay time than the non-PRFs. Together with different temperature dependencies, these gave autoignition delay times of non-PRFs that could be higher than those of their associated RONs. This tendency increased with pressure and decreased with temperature and was most marked with olefenic and toluenic fuels. This could result in values of the OI that were higher than the RON of the fuel. This is important because, for a number of evolutionary reasons, engine pressures are tending to increase and temperatures to decrease.     

Did a local distribution company procure prudently during the California electricity crisis?

To manage cost risk, prudent procurement of electric power requires that some portion of a buyer's energy demand be met through long-term contracting. Under cost-of-service regulation or performance-based regulation, a local distribution company (LDC) should be allowed to fully recover all prudently incurred power procurement costs. However, the regulatory test of prudence is an ex post review with the threat of disallowance. This paper presents an economic analysis of procurement prudence involving a small LDC, Bear Valley Electric Service (BVES), which serves a resort area in Southern California. The key findings are: (a) high and volatile prices and rolling blackouts characterized the market environment faced by the owner of BVES, Southern California Water Company (SCWC), at its signing of a 5-year fixed price contract; (b) SCWC was a price-taker with no incentive to act imprudently; (c) the contract was obtained via a competitive bidding process; (d) the contract price was comparable to the benchmark price of contemporaneous contracts; (e) the fixed price contract was economic when compared to available alternatives; and (f) despite (a)–(e), a negotiated settlement with the state regulator and a large user resulted in substantial disallowance. The policy implication is that a regulator should approve a prudent procurement plan proposed by an LDC to remove the unreasonable risk of an ex post review. If the LDC strictly adheres to the plan, the resulting electricity purchases are per se prudent and should entitle the LDC to full cost recovery.     

Experimental validation of a numerical model for heat transfer in vacuum glazing

Flat vacuum glazings consisting of a narrow evacuated space between two glass panes separated by an array of small support pillars have been fabricated. A guarded hot box calorimeter was designed and constructed to measure their heat transfer coefficients. Experimental measurements of temperatures and rates of heat transfer were found to be in very good agreement with those predicted using a developed finite element model. A method for determining the heat transfer coefficient of the evacuated gap has been established and comparisons are made between the measured and predicted glass surface temperature profiles of the exposed glass area and the heat transfer coefficients of the total glazing system in order to validated the model.     

Investigation of novel anthracene‐bridged carbazoles as sensitizers and Co‐sensitizers for dye‐sensitized solar cells

Novel anthracene‐bridged carbazole organic dyes (designated ML4 and ML5) were synthesized using the Suzuki coupling reaction. These dyes were designed to be donor‐π‐conjugation‐acceptor sensitizers for dye‐sensitized solar cells, where the carbazole moiety acts as the donor, the anthracene moiety provides the π‐conjugation, and the cyano acrylic acid acts as the acceptor. Solar cells were fabricated with ML4 and ML5 alone with low power conversion efficiencies, but they were also used as co‐sensitizers with N719, improving the efficiency of the dye‐sensitized solar cells produced by ~3% and ~10%, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Model-driven interoperability: engineering heterogeneous IoT systems

Interoperability remains a significant burden to the developers of Internet of Things systems. This is because resources and APIs are dynamically composed; they are highly heterogeneous in terms of their underlying communication technologies, protocols and data formats, and interoperability tools remain limited to enforcing standards-based approaches. In this paper, we propose model-based engineering methods to reduce the development effort towards ensuring that complex software systems interoperate with one another. Lightweight interoperability models can be specified in order to monitor and test the execution of running software so that interoperability problems can be quickly identified, and solutions put in place. A graphical model editor and testing tool are also presented to highlight how a visual model improves upon textual specifications. We show using case-studies from the FIWARE Future Internet Service domain that the software framework can support non-expert developers to address interoperability challenges.     

数字电视时代的隐藏式字幕

从过去来看，电视上出现字幕是再平常不过的事情的。当你换台时，字幕就会出现告诉你现在是哪一个频道。甚至当你调节音量时，很多电视机上也会出现字幕。     

Performance analysis of b-bit digital receivers for TR-UWB systems with inter-pulse interference

An ultra-wideband (UWB) transmitted reference (TR) system transmits an un-modulated pulse and a delayed modulated pulse pair. Then, a correlation receiver uses the former to demodulate the latter. Because of the long spread of a typical UWB channel, time delay between the two pulses is preferable to be larger than the channel delay spread for reduced noise at the receiver. However, for bandwidth efficiency, that delay should be made small, resulting in inter-pulse interference at the receiver. In this paper, digital receivers are constructed for TR-UWB systems including inter-pulse interference. A typical mean matching technique, appropriate for both PPM and PAM schemes, is implemented digitally to obtain a good template for symbol detection. Joint estimation and detection performance of this family of digital receivers, using finite number of bits in analog-to-digital conversion and finite noisy observations, is analyzed. Closed form results are derived and verified by computer simulations. In addition, the effect of time offset between the reference pulse and information carrying pulse is studied. Overlap of the two pulses does not incur noticeable performance degradation. The proposed analytical framework can be applied to study detection performance of other related digital receivers not covered in this paper