Crystallization of running filament in melt spinning of polypropylene

The crystallization kinetics of the running filament in melt spinning have been studied for three cases: isothermal crystallization of an isotropic melt, non-isothermal crystallization of an isotropic melt, and non-isothermal crystallization of a non-isotropic melt. Both the temperature and the orientation dependences of nucleation rate and growth rate are estimated for polypropylene. Calculated curves for non-isothermal crystallization of a non-isotropic melt with partial high orientation closely approximate the experimental data. In particular, the experimental data are best explained by crystallization with two-dimensional growth. The crystallization processes in melt spinning may be governed by localized molecular orientation of the supercooled melt in the initial stage.     

Human interaction with policy flight simulators

Policy flight simulators are designed for the purpose of exploring alternative management policies at levels ranging from individual organizations to national strategy. This article focuses on how such simulators are developed and on the nature of how people interact with these simulators. These interactions almost always involve groups of people rather than individuals, often with different stakeholders in conflict about priorities and courses of action. The ways in which these interactions are framed and conducted are discussed, as well as the nature of typical results.     

Atmospheric pressure chemical ionization mass spectrometry for analysis of lipids

Atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) has proven to be a very valuable technique for analysis of lipids from a variety of classes. This instrumental method readily produces useful ions with gentle fragmentation from large neutral molecules such as triacylglycerols and carotenoids, which are often difficult to analyze using other techniques. Molecules that are easily ionized, such as phospholipids, produce molecular ions and diagnostically useful fragment ions that are complementary to those produced by methods such as electrospray ionization MS with collision-induced dissociation. The simplicity and versatility of APCI-MS make it an ideal tool for use in solving hitherto very difficult analytical problems.     

Diels-alder adducts from safflower oil fatty acids: I. Maleic anhydride as dienophile

The Diels-Alder reaction between alkali conjugated and elaidinized safflower oil fatty acids and maleic anhydride was studied under various experimental conditions. The principal product which was obtained in 51–55% yields was a mixture of the adduct of maleic anhydride and maleic acid in 40∶60 proportions. The isolation and properties of this mixed adducts from the reaction mixture and their conversion to trimethyl, tributyl and triallyl esters are described. The trimethyl ester was also obtained in good yield from the methyl esters of the fatty acids and dimethyl maleate.     

Influence of silicon on the growth of barrier-type anodic films on titanium

Amorphous anodic titania, stabilised by incorporation of silicon species, is shown to grow to high voltages on sputter-deposited, single-phase Ti-Si alloys during anodizing at a constant current density in ammonium pentaborate electrolyte. The films comprise two main layers, with silicon species confined to the inner layers. An amorphous-to-crystalline transition occurs at ∼60 V on the Ti-6 at.% Si alloy, while the transition is suppressed to voltages above 140 V on alloys with 12 and 26 at.% silicon. The crystalline oxide, nucleated at a depth of ∼40% of the film thickness, is associated with the presence of a precursor of crystalline oxide in the pre-existing air-formed oxide. The modified structure of the air-formed oxide due to increased incorporation of silicon species suppresses the amorphous-to-crystalline transition until the onset of dielectric breakdown. The transport numbers of cations and anions during growth of the anodic oxides are independent of the concentration of silicon species in the inner layer, despite the marked change in the field strength.     

Effect of coupling agents on thermal and electrical properties of mica/epoxy composites

The influence of 3-aminopropyltriethoxysilane, 3-glycidyloxypropyltrimethoxysilane, and neoalkoxytric(dioctyl pyrophosphato)zirconate on thermal expansion behavior, dielectric strength, and arc resistance of mica/epoxy composites has been investigated. The addition of mica up to 30% resulted in the reduction of thermal expansion with respect to neat resin. However, the coefficient of linear thermal expansion of 30% mica treated with aminosilane was the least among the various coupling agent-coated filler/epoxy composites. Mica (30%)/epoxy composites showed the highest dielectric strength values (26 kV/mm), but the highest arc resistance was obtained in zirconate-treated mica (30%)/epoxy composite. © 1995 John Wiley & Sons, Inc.     

Pro- und Antioxydantien auf dem Fettgebiet XVII: Fette und Fettstoffwechsel der Winterschläfer, 1. Mitteilung: Der Siebenschläfer (Glis glis L.)

Pro- and Antioxidants in the Field of Fats XVII: Fats and Fat-metabolism of Hibernating Animals I. The Seven Sleepers. (Glis glis L.) After a short review of the literature about hibernation, the analysis of the lipids of the seven sleepers (Glis glis L.) is given. The problem, whether the yellow lipochrome results from the autoxidation of polyenoic fatty acids because of the decrease in biological antioxidants, especially vitamin E, could not be completely explained. The brown tissue, the socalled “sleep gland” contains substances which are insoluble in fat solvents and probably formed by the reaction of polyenes with proteins or by the autoxidation of lipoproteins which contain them.     

Strain-induced crystallization,Part IV: Induction time analysis

The empirical equation, 1/t_i = Ae^Ei/RT, which expresses the exponential dependence of the reciprocal of crystallization induction time, t_i, has been analyzed and shown to be equivalent to the nucleation rate equations derived earlier in Part III (1). Consequently we have used the t_i measurements obtained earlier by Krueger and Yeh to calculate not only the nucleation rate enhancements but also the melting point elevations, the relative crystal thickness changes and molecular coil extension ratios of shear-crystallization polyethylene. It is shown that polyethylene when crystallized between 129 and 131°C at shear rates between 1.56 and 9.70 sec^?1 can have melting point increases of 4.2 to 7.2°C and crystal thickness decreases of 20 to 25 percent, when compared to those crystallized at 130°C in the quiescent state. The predicted “coil” extension in the melt just prior to shear-induced crystallization ranges between 21 and 36 percent. The results of these analyses as well as those on nucleation rates of polyethylene oxide are discussed in detail.