Multi-criteria Decision-making Approach for Environmental Impact Assessment to Reduce the Adverse Effects Of Dams

Water Resources Management - Environmental Impact Assessments (EIAs) of development projects are necessary to minimize negative impacts and maximize benefits. The objective of this paper is to...     

Production of propylene glycol fatty acid monoesters by lipase-catalyzed reactions in organic solvents

Fatty acid monoesters of propylene glycol (1,2-propanediol) are good water-in-oil emulsifiers. These esters were synthesized enzymatically to overcome the problems associated with chemical processes. APseudomonas lipase was added to reaction mixtures containing propylene glycol and various acyl donors (fatty acids, fatty acid ethyl esters, fatty acid anhydrides and triglycerides) in organic solvents, and the mixtures were shaken at 30°C. The products were analyzed by gas chromatography. The yield of monoesters was affected by the acyl donors, organic solvents, temperature, water content, pH memory and reaction time. The anhydrous (lyophilized) enzyme and fatty acid anhydrides were best for monoester production. The optimum pH ranges were 4–5 and 8–10. The yields of propylene glycol monolaurate, monomyristate, monopalmitate, monostearate and monooleate with 50 mM fatty acid anhydrides as acyl donors were 97.2, 79.6, 83.7, 89.7 and 93.4 mM, respectively; those with 50 mM fatty acids as acyl donors were 37.3, 28.7, 28.7, 35.3 and 36.2 mM, respectively. The yields of propylene glycol monopalmitate, monostearate and monooleate with 50 mM triglycerides as acyl donors were 87.4, 65.1 and 83.2 mM, respectively.     

Geochemical implications of trace elements and sulfur in the saturate, aromatic and resin fractions of crude oil from the Mara and Mara Oeste fields, Venezuela

Ten trace elements (Cr, Zn, Fe, Mn, Cu, Co, Ni, Mo, V and Sr) and sulfur were determined in the saturate, aromatic and resin fractions of 15 crude oils from Mara (DM) and Mara Oeste (DMO) fields of the Maracaibo Basin, Venezuela. The oils studied are classified as unaltered or altered by biodegradation. In the altered oil, the depletion of n-alkanes, the absence of isoprenoids and the presence of steranes and hopanes unaltered by biodegradation are indicative of moderate biodegradation. The elements Zn, Fe, Mn, Cu, Ni, and Sr were detected in the saturated hydrocarbon fraction; Cr and V were detected in the aromatic fraction in addition to the above elements; whereas the elements detected for the resin fraction were Cr, Zn, Fe, Cu, Ni, Mo, V, and Sr. Co was not detected in any fractions of the oils analyzed. Sulfur was found in all fractions of the oils studied. It was proposed that Fe, Zn, Sr, and Mn could have entered the oil during migration or Fe, Zn and Mn as pollutants during oil extraction. Cr and Cu may be of biological origin and Mo could be incorporated into the reservoir through bacteria. Only S, V, and Ni in the resin fractions can be used as indicators of the origin and correlation of Mara and Mara Oeste oils. Based on the results obtained in this work, it can be established that the V/(V+Ni) ratio in the resin fraction can be used as a correlation parameter, for these oils.     

A simplified method for analyzing mold filling dynamics. Part II: Extensions and comparisons with experiment

A dimensional analysis based on four parameters has been developed previously to predict injection pressure; clamp force, and bulk temperature for the injection molding of amorphous materials in center-gated disk-shaped cavities. In this paper geometric and semicrystalline-materials approximations are introduced and tested for extending the previous analysis to include multigated thin cavities and semicrystalline materials. The combination of these approximations and the previous analysis, known hereafter as the Radial Flow Method (RFM), greatly simplifies the analysis of mold filling. The geometric approximation, which is based on a simple model for the axial stress distribution in the cavity, is shown to give reasonable predictions when compared with experimental data and a numerical two-directional flow simulation for the filling of an off-center-gated rectangular cavity with acrylonitrilebutadiene-styrene copolymer (ABS). The semicrystallinematerials approximation, in which heat capacity and viscosity changes during crystallization are neglected, is shown to give good agreement with experimental data for the filling of a center-gated disk-shaped cavity with polypropylene. As an illustration, the Radial Flow Method is used to analyze the molding of a large, thin-wall automobile interior trim panel. The inlet melt temperature, mold-wall temperature, part thickness, injection rate, viscosity and gate locations are varied in a series of calculations to determine the relative effectiveness of these variables in lowering the injection pressure and Clamp force. The results obtained with the Radial Flow Method are in good agreement with those obtained by a finiteelement simulation of two-directional flow.     

Insecticidal Effects of Organotin(IV) Compounds on Plutella Xylostella (L.) Larvae. II. Inhibitory Potencies Against Acetylcholinesterase and Evidence for Synergism in Tests With Bacillus Thuringiensis(BER.) and Malathion

Features of pesticide synergism and acetylcholinesterase (AChE) inhibition (in vitro) were studied using a selected range of organotin compounds against the early 4th instar larvae of a highly resistant strain of the diamondback moth (DBM), Plutella xylostella, a major universal pest of cruciferous vegetables.Fourteen triorganotin compounds were evaluated for their ability to enhance the toxicity of the microbial insecticide, Bacillus thuringiensis (BT) and of the commercial insecticide, Malathion to Plutella xylostella larvae. Supplemental synergism was observed with triphenyl- and tricyclopentyltin hydroxides in combinations with Bacillus thuringiensis. Increased synergism was observed with an increase in the number of cyclopentyl groups on tin in the mixed series, Cyp(n) Ph(3-n) SnX, where X = OH, and 1-(1,2,4-triazolyl). The combination of (p-chlorophenyl)diphenyltin N,N-dimethyldithiocarbamate at LD(10) and LD(25) concentrations with sublethal concentrations of Malathion as well as of tricyclohexyltin methanesulphonate at the 0.01% (w/v) concentration with Malathion exerted strong synergistic effects (supplemental synergism) with toxicity index (T.I) values of 7.2, 19.8 and 10.1, respectively.Studies on the in vitro inhibition of acetylcholinesterase prepared from the DBM larvae showed that while most of the triorganotin Compounds tested were without effect on the enzyme, compounds containing the thiocarbamylacetate or the dithiocarbamylacetate moieties demonstrated appreciable levels of inhibition, being comparable in efficacy to commercial grades of Malathion and Methomyl.     

Developmental variations in plasma leptin,leptin soluble receptor and their molar ratio in healthy infants

Background  

Leptin and its soluble receptor (sOB-R) are important to regulation of body composition but there are no data on the developmental variations in these plasma variables and their relationship with body composition measurements,     

Mandibular gland components of european and africanized honey bee queens (Apis mellifera L.)

The composition of the five-component honey bee queen mandibular gland pheromone (QMP) of mated European honey bee queens was compared to those of virgin and drone-laying (i.e., laying only haploid unfertilized eggs that develop into males), European queens and Africanized mated queens. QMP of mated European queens showed significantly greater quantities of individual components than all queen types compared, except for a significantly greater quantity of 9-hydroxy-(E)-2-decenoic acid (9-HDA) found in Africanized queens. Glands of European drone-laying queens contained quantities intermediate between virgin and mated queens, reflecting their intermediate reproductive state and age. QMP ontogeny shifts from a high proportion of 9-keto-(E)-2-decenoic acid (ODA) in young unmated queens to roughly equal proportions of ODA and 9-HDA in mated queens. A biosynthetic shift occurs after mating that results in a greater proportion of 9-HDA, methylp-hydroxybenzoate (HOB), and 4-hydroxy-3-methoxyphenylethanol (HVA) production, accompanied by a decreased proportion of ODA. Africanized QMP proportions of ODA and 9-HDA were significantly different from European queens. A quantitative definition of a queen equivalent of QMP is proposed for the various queen types, and a standard queen equivalent for mated European honeybee queen mandibular gland pheromone is adopted as 200µg ODA, 80µg 9-HDA, 20µg HOB, and 2 µg HVA.     

A study of the tool-chip interface contact problem under low cutting velocity with an elastic cutting tool

To understand the effects of elastic deformation of the tool and the crater phenomenon generated by the cutting force and high pressure during metal cutting processing on the cutting process, an iterative mathematical model for calculating the tool-chip contact is developed in this paper under the assumption of elastic cutting tools. In this model, the finite-element method is used to simulate the cutting of mild steel by a cutting tool of three different materials. The results obtained in the simulation are found to match experimental data reported by related studies. The simulation results also indicate that tools with a smaller stiffness produce greater elastic deformation. Further, decrease of the rake angle due to elastic deformation of the tool can result in greater difficulty in internal deformation of the material and an increase in cutting force. The micro-crater phenomenon on the tool face generated by high pressure at the tool-chip interface is the preliminary symptom of crater wear on the tool face. Therefore, under some machining conditions, such as in precision machining or in automation processing where tool compensation is required, the phenomenon of elastic deformation of the tool must be considered carefully to ensure product precision.     

Microstructure and tensile properties of squeeze cast magnesium alloy AM50

High-pressure die cast magnesium alloy AM50 is currently used extensively in large and complex shaped thin-wall automotive components. For further expansion of the alloy usage in automobiles, novelmanufacturing processes need to be developed. In this study, squeeze casting of AM50 alloy with a relatively thick cross section was carried out using a hydraulic press with an applied pressure of 70 MPa. Microstructure and mechanical properties of the squeeze cast AM50 with a cross-section thickness of 10 mm were characterized in comparison with the die cast counterpart. The squeeze cast AM50 alloy exhibits virtually no porosity in the microstructure as evaluated by both optical microscopy and the density measurement technique. The results of tensile testing indicate the improved tensile properties, specifically ultimate tensile strength and elongation, for the squeeze cast samples over the conventional high-pressure die cast parts. The analysis of tensile behavior show that the strain-hardening rate during the plastic deformation of the squeeze cast specimens is constantly higher than that of the die cast specimens. The scanning electron microscopy fractography evidently reveals the ductile fracture features of the squeeze cast alloy AM50.