Covalent attachment of single-stranded DNA to carbon paste electrode modified by activated carboxyl groups

A new method of the electrode modification and DNA immobilization for a biosensor is reported. Outer layer of a conventional carbon paste electrode (CPE) was modified with carboxyl groups by mixing stearic acid with the paste. Single-stranded deoxyribonucleic acid was attached to the modified electrode through a linker - ethylenediamine. Immobilization process was performed in the presence of activators - water soluble 1-ethyl-3(3′-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysulfosuccinimide (NHS). Stearic acid concentration and other experimental parameters of the procedure were optimized. Covalent immobilization of DNA on the electrode surface exhibits some advantages as compared to simple adsorption mainly due to the fact that nucleic acid chains are bound to an electrode surface by one end only and it ensures structural flexibility and increases hybridization without DNA leakage. Modified electrode with immobilized (21-mer) oligonucleotide as a specific probe was successfully applied in preliminary investigations for the detection of bar gene commonly used in genetically modified food.     

Synthesis and self-association in aqueous media of poly(ethylene oxide)/poly(ethyl glycidyl carbamate) amphiphilic block copolymers

New temperature sensitive AB, ABA, and BAB amphiphilic block copolymers consisting of hydrophilic poly(ethylene oxide) and hydrophobic poly(ethyl glycidyl carbamate) blocks were synthesized by anionic polymerization followed by chemical modification reactions. The self-association of the block copolymers in aqueous media was studied by UV-vis spectroscopy and dynamic and static light scattering. The obtained block copolymers spontaneously form micelles in aqueous media. The critical micellization concentration varied from 0.5 to 4 g/L depending on the copolymer architecture and composition. The influence of the temperature upon the self-association of the block copolymers was investigated. The increase of temperature did not affect the value of the critical micellization concentration, but led to the formation of better defined micelles with narrow size distribution.     

Study of the thermal stability of phases in the Mg-Al system

A part of the Al-Mg phase diagram was studied in the range of composition between 48 and 61 at.% Al by DSC and SEM/EDS methods. The temperature ranges of stability of the β, γ, and ɛ phases were considered. It was found that the congruent melting temperature of the β phase was 450±1 °C. The Al content in that phase was determined to be 61±1 at.% Al at 420 °C. The upper temperature limit of the stability of the ɛ phase was established to be 427±1 °C. The Al content changed from 54 at.% at 390 °C to 56 at.% at 420 °C. The lower temperature limit of the ɛ phase formation was not determined, as a result of a slow ɛ=β+γ reaction. The hypothetical λ or ζ phases were not found, but it was observed that decomposition of oxides might produce extra thermal effects.     

XPS spectra of the AFe4Al8 compounds with A=Y, Sc, U and Th

The XPS electronic structures of the AFe₄Al₈ (A=Sc, Y, U, Th) single crystals were measured. The valence band of UFe₄Al₈ exhibits domination of the U 5f states at the Fermi level, while for the other AFe₄Al₈ compounds the valence states are shifted by 0.5 eV toward higher binding energy. The multiplet structure of the U 4f and Th 4f states was analyzed in comparison with the U 4f states of U₃Ge₅ and UNiSb₂.     

Spectroscopic ellipsometry analysis of a thin film composite membrane consisting of polysulfone on a porous α-alumina support

Exposure of a thin polymer film to a fluid can affect properties of the film such as the density and thickness. In particular in membrane technology, these changes can have important implications for membrane performance. Spectroscopic ellipsometry is a convenient technique for in situ studies of thin films, because of its noninvasive character and very high precision. The applicability of spectroscopic ellipsometry is usually limited to samples with well-defined interfacial regions, whereas in typical composite membranes, often substantial and irregular intrusion of the thin film into the pores of a support exists. In this work, we provide a detailed characterization of a polished porous alumina membrane support, using variable-angle spectroscopic ellipsometry in combination with atomic force microscopy and mercury porosimetry. Two Spectroscopic ellipsometry optical models are presented that can adequately describe the surface roughness of the support. These models consider the surface roughness as a distinct layer in which the porosity gradually increases toward the outer ambient interface. The first model considers the porosity profile to be linear; the second model assumes an exponential profile. It is shown that the models can be extended to account for a composite membrane geometry, by deposition of a thin polysulfone film onto the support. The developed method facilitates practicability for in situ spectroscopic ellipsometry studies of nonequilibrium systems, i.e., membranes under actual permeation conditions.     

Selection of Endophytic Strains for Enhanced Bacteria-Assisted Phytoremediation of Organic Pollutants Posing a Public Health Hazard

Anthropogenic activities generate a high quantity of organic pollutants, which have an impact on human health and cause adverse environmental effects. Monitoring of many hazardous contaminations is subject to legal regulations, but some substances such as therapeutic agents, personal care products, hormones, and derivatives of common organic compounds are currently not included in these regulations. Classical methods of removal of organic pollutants involve economically challenging processes. In this regard, remediation with biological agents can be an alternative. For in situ decontamination, the plant-based approach called phytoremediation can be used. However, the main disadvantages of this method are the limited accumulation capacity of plants, sensitivity to the action of high concentrations of hazardous pollutants, and no possibility of using pollutants for growth. To overcome these drawbacks and additionally increase the efficiency of the process, an integrated technology of bacteria-assisted phytoremediation is being used recently. For the system to work, it is necessary to properly select partners, especially endophytes for specific plants, based on the knowledge of their metabolic abilities and plant colonization capacity. The best approach that allows broad recognition of all relationships occurring in a complex community of endophytic bacteria and its variability under the influence of various factors can be obtained using culture-independent techniques. However, for practical application, culture-based techniques have priority.     

The influence of Mg addition and hydrostatic extrusion HE on the repassivation ability of pure Al,AlMg1 and AlMg3 model alloys in 3.5 wt-% NaCl

ABSTRACT

Commercially pure aluminium and two model aluminium–magnesium alloys were subjected to hydrostatic extrusion (HE). The microstructure of materials was observed using optical microscopy (OM). All materials were subjected to electrochemical corrosion tests in the 3.5?wt-% water solution of sodium chloride. The potentiodynamic polarisation measurements and electrochemical impedance spectroscopy were performed after samples’ immersion in open circuit potential. The surface of samples after corrosion examination was observed with the use of scanning electron microscopy. It was stated that all undeformed materials underwent pitting corrosion and further pits repassivation, while after HE pitting was also observed, but pit repassivation did not occur. This may be related to the microstructural changes caused by deformation, such as grain refinement. What is more, the pits character changed with the addition of a different amount of Mg to Al. Deterioration of corrosion resistance was also observed for all materials after HE.     

New Insights into Red Blood Cell Microcytosis upon mTOR Inhibitor Administration

The aim of this study was to evaluate the effect of everolimus, a mammalian target of rapamycin (mTOR) inhibitor, on red blood cell parameters in the context of iron homeostasis in patients with tuberous sclerosis complex (TSC) and evaluate its effect on cell size in vitro. Everolimus has a significant impact on red blood cell parameters in patients with TSC. The most common alteration was microcytosis. The mean MCV value decreased by 9.2%, 12%, and 11.8% after 3, 6, and 12 months of everolimus treatment. The iron level declined during the first 3 months, and human soluble transferrin receptor concentration increased during 6 months of therapy. The size of K562 cells decreased when cultured in the presence of 5 μM everolimus by approximately 8%. The addition of hemin to the cell culture with 5 μM everolimus did not prevent any decrease in cell size. The stage of erythroid maturation did not affect the response to everolimus. Our results showed that the mTOR inhibitor everolimus caused red blood cell microcytosis in vivo and in vitro. This effect is not clearly related to a deficit of iron and erythroid maturation. This observation confirms that mTOR signaling plays a complex role in the control of cell size.     

Cutting data correction in Inconel 718 turning

The paper presents research work concerning difficult-to-cut materials turning and chipbreakers reliability in local operating features. Inconel 718 alloy was used as a sample material and two different chipbreakers were tested. The aim of the research was to check the efficiency of chipbreakers in the area of applications recommended by tool manufacturers. As a result, the algorithm for cutting data selection and correction which combines experiments and simulation processes concerning chip breakage effectiveness was built. To estimate chip forms in tests, the visual system equipped with a high-speed camera was used. The cutting forces measuring system provided information for verification of simulation results. The simulation based on the FEM was applied to estimate chip groove filling. Distributions of temperature and stresses on the tool rake face in the function of distance from the cutting edge were calculated. The paper gives recommendations for cutting data correction to achieve acceptable chip forms.