Synthesis and self-association in aqueous media of poly(ethylene oxide)/poly(ethyl glycidyl carbamate) amphiphilic block copolymers

New temperature sensitive AB, ABA, and BAB amphiphilic block copolymers consisting of hydrophilic poly(ethylene oxide) and hydrophobic poly(ethyl glycidyl carbamate) blocks were synthesized by anionic polymerization followed by chemical modification reactions. The self-association of the block copolymers in aqueous media was studied by UV-vis spectroscopy and dynamic and static light scattering. The obtained block copolymers spontaneously form micelles in aqueous media. The critical micellization concentration varied from 0.5 to 4 g/L depending on the copolymer architecture and composition. The influence of the temperature upon the self-association of the block copolymers was investigated. The increase of temperature did not affect the value of the critical micellization concentration, but led to the formation of better defined micelles with narrow size distribution.     

Double-Headed Cationic Lipopeptides: An Emerging Class of Antimicrobials

Antimicrobial peptides (AMPs) constitute a promising tool in the development of novel therapeutic agents useful in a wide range of bacterial and fungal infections. Among the modifications improving pharmacokinetic and pharmacodynamic characteristics of natural AMPs, an important role is played by lipidation. This study focuses on the newly designed and synthesized lipopeptides containing multiple Lys residues or their shorter homologues with palmitic acid (C₁₆) attached to the side chain of a residue located in the center of the peptide sequence. The approach resulted in the development of lipopeptides representing a model of surfactants with two polar headgroups. The aim of this study is to explain how variations in the length of the peptide chain or the hydrocarbon side chain of an amino acid residue modified with C₁₆, affect biological functions of lipopeptides, their self-assembling propensity, and their mode of action.     

Improvement of Aglycone π-Stacking Yields Nanomolar to Sub-nanomolar FimH Antagonists

Antimicrobial resistance has become a serious concern for the treatment of urinary tract infections. In this context, an anti-adhesive approach targeting FimH, a bacterial lectin enabling the attachment of E. coli to host cells, has attracted considerable interest. FimH can adopt a low/medium-affinity state in the absence and a high-affinity state in the presence of shear forces. Until recently, mostly the high-affinity state has been investigated, despite the fact that a therapeutic antagonist should bind predominantly to the low-affinity state. In this communication, we demonstrate that fluorination of biphenyl α-d -mannosides leads to compounds with perfect π–π stacking interactions with the tyrosine gate of FimH, yielding low nanomolar to sub-nanomolar K_D values for the low- and high-affinity states, respectively. The face-to-face alignment of the perfluorinated biphenyl group of FimH ligands and Tyr48 was confirmed by crystal structures as well as ¹H,¹⁵N-HSQC NMR analysis. Finally, fluorination improves pharmacokinetic parameters predictive for oral availability.     

Biodegradability evaluation of wastewaters from malt and beer production

This study reports results of respirometric measurements of activated sludge biodegrading the substrate in wastewater originating from the following brewery plant production departments: malt house, brewhouse, fermentation house and racking house. The process was conducted at two temperatures: 10 and 20°C with activated sludge adapted to brewery wastewaters. The loading of activated sludge reached 0.25 g chemical oxygen demand per gram dry matter per day, which assured complete degradation of organic matter. The physicochemical characteristics of the wastewaters are provided. The study demonstrates a correlation between the site of wastewater generation, the specific character of a unitary technological process and the quality of the wastewater discharged to the sewage system, including biodegradability. Despite significant differences in the quality of the wastewaters, they were characterized by high biodegradability at a temperature of 10 and 20°C and by the C:N:P ratio being beneficial for biological treatment, irrespective of their source of origin. Copyright © 2013 The Institute of Brewing & Distilling     

Nanoengineered biocomposite tricomponent polymer based matrices for bone tissue engineering

Nanoengineered biodegradable constructs based on synthetic and natural polymers enriched with hydroxyapatite (HA) nanoparticles have been found to mimic the extracellular matrix of bone tissue. The main objective of this study was to create biocomposite nanostructured scaffolds by incorporating collagen and HA nanoparticles into poly(L-lactic acid)-co-poly(?-caprolactone) by electrospinning. The fiber diameter of the composite PLCL/Col and PLCL/Col/HA fibers was smaller compared to PLCL. In vitro biocompatibility of the scaffolds studied using human fetal osteoblasts and EDX analysis showed high deposition of calcium on PLCL/Col/HA. The results shows that PLCL/Col/HA nanofibrous constructs have huge potential as substrates for bone regeneration.     

Photoluminescence and energy transfer in transparent glass-ceramics based on GdF3:RE3+ (RE = Tb,Eu) nanocrystals

In the present work,the transparent oxyfluoride glass-ceramic samples containing GdF_3:RE~(3+)(RE=Tb,Eu) nanocrystals(nGCs) were fabricated via controlled heat-treatment of precursor xerogels prepared using a sol-gel method.The formation of GdF_3 nanocrystalline phase from gadolinium(III) trifluoroacetate was verified based on XRD measurements.The average crystal sizes calculated from Scherrer formula were estimated to～10 nm as well as～6 nm for Tb~(3+)-and Eu~(3+)-doped samples,respectively.The optical behavior of prepared sol-gel samples was evaluated based on photoluminescence excitation(PLE) and emission spectra(PL) as well as luminescence decay analysis.Obtained samples exhibit the ~5D_4→~7F_J(J=6-3,Tb~(3+))and the ~5D_0→~7F_J(J=0-4,Eu~(3+)) emission bands recorded within the visible spectral area under excitation at near-UV(393 nm(Eu~(3+)),351,369,378 nm(Tb~(3+))) as well as middle-UV illumination(273 nm(Gd~(3+))).Additionally,based on recorded decay curves,the luminescence lifetimes(τ_m) for the ~5D_4(Tb3+) and the ~5D_0(Eu~(3+))excited states were also evaluated.In general,recorded luminescence spectra and double-exponential character of decay curves for nGCs indicate a successful migration of Tb~(3+) and Eu~(3+) dopant ions from amorphous silicate framework to lowphonon energy GdF_3 nanocrystal phase.     

Monte Carlo Methods for Volumetric Light Transport Simulation

The wide adoption of path‐tracing algorithms in high‐end realistic rendering has stimulated many diverse research initiatives. In this paper we present a coherent survey of methods that utilize Monte Carlo integration for estimating light transport in scenes containing participating media. Our work complements the volume‐rendering state‐of‐the‐art report by Cerezo et al. [ CPP*05 ]; we review publications accumulated since its publication over a decade ago, and include earlier methods that are key for building light transport paths in a stochastic manner. We begin by describing analog and non‐analog procedures for free‐path sampling and discuss various expected‐value, collision, and track‐length estimators for computing transmittance. We then review the various rendering algorithms that employ these as building blocks for path sampling. Special attention is devoted to null‐collision methods that utilize fictitious matter to handle spatially varying densities; we import two “next‐flight” estimators originally developed in nuclear sciences. Whenever possible, we draw connections between image‐synthesis techniques and methods from particle physics and neutron transport to provide the reader with a broader context.     

Study of the adhesion of Staphylococcus aureus to coated glass substrates

The adhesion of Staphylococcus aureus was studied using a selection of laboratory-prepared and commercially available coated glass substrates using a simple methodology. Substrates were examined by scanning electron microscopy, atomic force microscopy and water droplet contact angles. It was found that microbial adhesion was independent of surface roughness, when this was of a lower magnitude than microbial size. It was also found that microbial adhesion was greater for hydrophilic surfaces than for hydrophobic ones, but that on a photoinduced superhydrophilic surface, microbes were more spread out—a potential benefit for more effective photocatalytic disinfection. It is suggested that hydrophobic and photoinduced superhydrophilic surface coatings both have potential as a means of reducing microbial fouling of surfaces.     

Thermodynamic and Acoustic Properties of Mixtures of Dibromomethane + Heptane

Densities and speeds of ultrasound in binary mixtures of dibromomethane with heptane have been measured within the temperature range from 288.15 K to 318.15 K. From the experimental data, the thermodynamic excess volume, molar isobaric expansion, molar isentropic compression, and ultrasonic speed were calculated. The excess volume and excess isentropic compression have opposite signs, whereas the excess isobaric expansion is an S-shaped function of the mole fraction. An explanation was suggested to account for the excesses in terms of intermolecular interactions. It involved energetic and steric factors. Moreover, it was shown that the positive excess sound speed results almost entirely from the negative excess compression.     

Properties of CO2 laser-welded butt joints of dissimilar magnesium alloys

The paper presents results of keyhole laser beam welding of dissimilar magnesium alloys that have been carried out with the CO₂ laser of maximum power of 2.5 kW. The workpieces of die-cast alloys AZ91 and AM50 with thicknesses of 4.5 mm have been butt-welded with helium used as a shielding gas. With the chosen flow rate of helium shielding and the focal position set on the metal surface the nearly parallel fusion zones boundaries were obtained. The analysis of microstructures of the joints, measurements of hardness distribution and the elemental distribution in the weld cross-sections permitted to find the changes due to heating in the fusion zones and recrystallization. The static tensile strength tests and the three point bending tests have allowed to determine the mechanical properties of the joints. The corrosion resistance tests performed by the electrochemical method on samples of as-cast materials and samples with the welds of similar and dissimilar alloys have not displayed the differences in the corrosion resistance. However, the microscopic observations of surfaces of welded samples have shown the influence of the joints on corrosion development.