Microstructural Evolution of Gas-Pressure-Sintered Si3N4 with Yb2O3 as a Sintering Aid

Microstructural evolution of gas-pressure-sintered Si₃N₄ with Yb₂O₃ as a sintering aid was observed. Microstructures typical for in situ toughened Si₃N₄, i.e., large elongated grains randomly distributed in a fine matrix, were observed. However, the size of the elongated grains near the surface was much larger than that at the center, resulting in two distinct regions: an inner region and an outer region. The smaller the amount of Yb₂O₃ added, the larger the difference in the size of the elongated grains between the outer and inner regions. The difference between microstructures was diminished when 16 wt% Yb₂O₃ was added. The microstructural change with Yb₂O₃ content was attributed to the evaporation of Yb-containing liquid phase from the surface.     

Blends of chlorinated isotactic polypropylene with poly(ethylene-co-vinyl acetate) I. Effect of component polymers composition on the blend miscibility

Chlorinated isotactic polypropylenes (CPP) having various chlorine contents were blended with poly(ethylene-co-vinyl acetate)s (EVA) having various vinyl acetate (VA) contents. The blends were made by casting films from dilute THF solutions and miscibility of the blends was identified by single glass transition temperature, which was confirmed by DSC and dynamic mechanical measurements. Based on the miscibility data from a large number of CPP/EVA combinations, a miscibility map was depicted where CO equivalent weight (CO-EQW) of EVA was plotted against chlorine equivalent weight (Cl-EQW) of CPP. Though an attractive interaction between CPP and EVA could be detected in all the miscible and immiscible blend pairs, miscibility of the CPP/EVA blends could solely be observed in a relatively narrow range of Cl-EQW ca. 65–100 and CO-EQW ca. 170–230.     

Surfactants as replacements for natural lipids in bread baked from defatted wheat flour

Petroleum ether (PE) extracted 1.00% total free lipids (0.70% nonpolar and 0.30% polar) and 2-propanol (PrOH) extracted 1.36% total free and bound lipids (0.73% nonpolar and 0.63% polar) from wheat flour; the lipid fractions were characterized by thin layer chromatography. PE- or PrOH-defatted flours were baked after reconstitution with total, nonpolar, or polar wheat flour lipids; or with equivalent amounts of nonionic sucrose monopalmitate (SMP), ethoxylated monoglycerides (EMG) — each with a hydrophile-lipophile balance (HLB) of 14.0 or anionic sodium stearoyl-2-lactylate (SSL) — with an HLB value of 9.0. Defatted flours supplemented with surfactants alone or in combination with wheat flour lipids were used in bread with no-shortening and with 3%-shortening. The importance of the polar flour lipids in breadmaking was verified. The lipids in wheat flour were essential for maximizing the beneficial effects of shortening on breadmaking quality. Nonionic SMP or EMG completely replaced both PE-extractable wheat flour free total lipids ( or their non-polar or polar fractions) and 3% shortening; nonionic surfactants with high HLB were better than the anionic SSL for replacing free flour lipids. No surfactant completely replaced unfractionated PrOH-extracted lipids (free + bound) and shortening or total polar flour lipids (free + bound). All surfactants, especially anionic SSL, added with PrOH-extracted polar lipids improved the overall bread-making properties of the PrOH-defatted flour both in the absence and in the presence of shortening. Presented at the AOCS Meeting, New York, May 1977     

Item recommendation based on context-aware model for personalized u-healthcare service

A personalized service in the ubiquitous environment is to provide services or items, which reflect personal tastes, attitudes, and contexts. It is impossible to reflect the context information generated in u-healthcare environments due to the existing recommendation system performing the recommendation using the information directly input by users and application usage record only. This study develops a context-aware model using the context information provided by the context information model. The study applies it to the extraction of the missing value in a collaborative filtering process. The context-aware model reflects the information that selects items by users according to the appropriate context using the C-HMM and provides it to users. The solution of the missing value in the preference significantly affects the recommendation accuracy in a preference based item supply method. Thus, this study developed a new collaborative filtering for ubiquitous environments by reflecting the missing preference value and reflecting it to the collaborative filtering using the context-aware model. Also, the validity of this method will be evaluated by applying it to menu services in u-healthcare services.     

Development of head detection and tracking systems for visual surveillance

This paper proposes a technique for the detection of head nod and shake gestures based on eye tracking and head motion decision. The eye tracking step is divided into face detection and eye location. Here, we apply a motion segmentation algorithm that examines differences in moving people’s faces. This system utilizes a Hidden Markov Model-based head detection module that carries out complete detection in the input images, followed by the eye tracking module that refines the search based on a candidate list provided by the preprocessing module. The novelty of this paper is derived from differences in real-time input images, preprocessing to remove noises (morphological operators and so on), detecting edge lines and restoration, finding the face area, and cutting the head candidate. Moreover, we adopt a K-means algorithm for finding the head region. Real-time eye tracking extracts the location of eyes from the detected face region and is performed at close to a pair of eyes. After eye tracking, the coordinates of the detected eyes are transformed into a normalized vector of x-coordinate and y-coordinate. Head nod and shake detector uses three hidden Markov models (HMMs). HMM representation of the head detection can estimate the underlying HMM states from a sequence of face images. Head nod and shake can be detected by three HMMs that are adapted by a directional vector. The directional vector represents the direction of the head movement. The vector is HMMs for determining neutral as well as head nod and shake. These techniques are implemented on images, and notable success is notified.     

Concentration of tocopherols from soybean sludge by supercritical carbon dioxide

A supercritical fluid extraction method has been applied to test the feasibility of tocopherol concentration from soybean sludge with carbon dioxide at temperatures and pressures ranging from 35 to 70°C and 200 to 400 bar, respectively. The supercritical solubility of the esterified soybean sludge was over 4–6 times greater than that of the original soybean sludge. By a simple batch-type one-stage method the tocopherols in the esterified soybean sludge could be concentrated up to 40 wt%. The overall results of the present study show that soybean sludge initially containing about 13–14 wt% tocopherols may require a countercurrent multistage column to be highly and effectively concentrated.     

Effect of surface coating on the screw loosening of dental abutment screws

Regardless of the type of performed restoration, in most cases, a screw connection is employed between the abutment and implant. For this reason, implant screw loosening has remained a problem in restorative practices. The purpose of this study was to compare the surface of coated/plated screws with titanium and gold alloy screws and to evaluate the physical properties of coated/plated material after scratch tests via FE-SEM (field emission scanning electron microscopy) investigation. GoldTite, titanium screws provided by 3i (Implant Innovation, USA) and TorqTite, titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, Korea) were selected for this study. The surface, crest, and root of the abutment screws were observed by FE-SEM. A micro-diamond needle was also prepared for the scratch test. Each abutment screw was fixed, and a scratch on the surface of the head region was made at constant load and thereafter the fine trace was observed with FE-SEM. The surface of GoldTite was smoother than that of other screws and it also had abundant ductility and malleability compared with titanium and gold screws. The scratch tests also revealed that teflon particles were exfoliated easily in the screw coated with teflon. The titanium screw had rough surface and low ductility. The clinical use of gold-plated screws is recommended as a means of preventing screw loosening.     

Note: Interpolation for evaluation of a two-dimensional spatial profile of plasma densities at low gas pressures

An interpolation algorithm for the evaluation of the spatial profile of plasma densities in a cylindrical reactor was developed for low gas pressures. The algorithm is based on a collisionless two-dimensional fluid model. Contrary to the collisional case, i.e., diffusion fluid model, the fitting algorithm depends on the aspect ratio of the cylindrical reactor. The spatial density profile of the collisionless fitting algorithm is presented in two-dimensional images and compared with the results of the diffusion fluid model.