一种确定高窄带滤光片峰值波长的方法

本文介绍一种主动式高窄带滤光片峰值波长的测量方法。该方法可以有效的测量出窄带滤光片的敏感波长，而不需要太复杂的设备。通过染料激光谐振腔的模式竞争，可以测量出滤光片的透射或反射波的波长。     

砾岩油藏合理注采压力系统研究--以七中东区八道湾组油藏为例

注采压力系统指的是从注水泵站到采油井井口的各环节的压力配置 ,在这一压力系统中 ,地层压力和油井流动压力是决定整个压力系统的关健 ,也是油藏工程研究的核心。本文利用油藏工程方法对砾岩油藏高含水期油井和注水井的地层压力、流动压力等注采压力系统进行了研究界定 ,将为砾岩油藏的开发水平提供技术支持     

等离子体氧化nc-Si/SiO_2多层膜的蓝光发射

报道了在等离子体增强化学气相沉积 (PECVD)系统中用交替淀积 a-Si对其进行原位等离子体氧化的方法制备了 a-Si∶H/ Si O2 多层膜。随着 a-Si∶H子层的厚度从 3 .8nm减小到 1 .5 nm,a-Si∶H/ Si O2 多层膜的光吸收边和光致发光 (PL )出现了蓝移。在晶化的 a-Si∶ H/ Si O2 多层膜中不仅观察到室温下的红光带 (80 0nm)的发光峰 ,而且还观察到蓝光发射 (4 2 5 nm) ,结合 Raman,TEM和 PL测试 ,对其原因作了简单的分析     

Comments on `Hash-based and index-based join algorithms for cubeand ring connected multicomputers' by E.R. Omiecinski and E.T. Lin

The cost distributions of both the parallel hybrid-hash join and the parallel join-index join algorithms proposed in the above-named work (ibid., vol.1, p.329-43, Sept. 1989) are presented in more detail. The result shows that almost the entire relation may need to be retrieved from disk, though the join selectivity is low. A table of semi-join selectives and cube sizes is given to show the condition that the join-index method performs better than the hybrid-hash method, i.e., the really low selectivity for the join-index method. An error in one of the cost formulas is corrected, and a more efficient method on the final join in the join-index method is proposed     

多工况多级离心压缩机总体优化命题的建模与数值方法

介绍了多工况 点的压缩机最优模拟设计点的特点及相应的优化建模，包括目标函数的建立、约束条件的确立和计算方法，使满足该模拟设计点要求的压缩机在逼近优目标函数最大值的同时，兼顾各真实工况运行点都在较好效率下工作，并列出了基于模型级数据库的优化设计实例。     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

实体造型及其二维图形转换技术在包装机械设计中的应用

介绍运用AutoCAD进行实体造型，再将其转换为二维图形，从而获得零件图的方法，该方法可以显著提高包装机械的设计效率。     

富氧氮氧化硅薄膜退火的研究

利用红外吸收(IR)谱和X射线光电子谱(XPS)对富氧氮氧化硅(oxygen-rich SiOxNy)及其在600、750和900℃下退火后样品的微结构进行了研究.实验中除观察到N、H的释放外,首次发现退火会导致SiOxNy中O的释放,同时还发现退火温度不同,H、O、N元素的释放量以及微结构的变化都不相同,根据这些现象,提出了5个化学反应过程并予以解释.     

核电厂管系振动鉴定

本文介绍了核电厂管道振动鉴定概况,讨论了目前使用的管系振动的鉴定方法,给出了鉴定准则。