A Survey of Inverse Surface Design From Light Transport Behavior Specification

Inverse surface design problems from light transport behavior specification usually represent extremely complex and costly processes, but their importance is well known. In particular, they are very interesting for lighting and luminaire design, in which it is usually difficult to test design decisions on a physical model in order to avoid costly mistakes. In this survey, we present the main ideas behind these kinds of problems, characterize them, and summarize existing work in the area, revealing problems that remain open and possible areas of further research.     

Natural convection from narrow horizontal plates at moderate Rayleigh numbers

The present work deals with the natural convection flow and heat transfer from a horizontal plate cooled from above. Experiments are carried out for rectangular plates having aspect ratios between φ=0.036 and 0.43 and Rayleigh numbers in the range 290?Ra_w?3.3×10⁵. These values of Ra_w and φ have been selected below those commonly considered in previous research in view of a future application to the design of printed circuit boards. The plates are made of two different metals, copper and steel. The choice of a metal is relevant to the present problem because the plates are heated by means of an electric current. Important variations of the surface temperature are observed along the transverse direction for the steel plates. The surface of the copper plates is almost isothermal because of the high thermal conductivity of the metal.Calculations for a semi-infinite plate are carried out to predict the transverse profiles of the surface temperature and heat flux and to visualize the structure of the flow. Three-dimensional calculations are also used at a qualitative level to observe the changes in the flow structure due to the finite length of the plate. Present results are compared with both previous experimental work and analyses that are based on boundary layer theory. It is shown that analyses for an infinite boundary layer are not completely applicable to the present problem because of its different physics. The most relevant feature of the natural convection flow, which is not predicted by boundary layer analyses, is a thermal plume rising near the center of the plate.Present heat transfer results differ from previous experimental work because of the lower Rayleigh numbers and aspect ratios investigated here. The Nusselt number is found to depend on Ra_wⁿ, with the exponent n=0.17 being lower than most of the values reported in the literature. This comparatively low value is related to the transverse conduction of heat through the air, which becomes increasingly significant as Ra_w approaches zero. It is shown that such a low-Ra_w effect can be accounted for in a physically consistent manner by adding a constant term to the heat transfer correlation. On the other hand, it is found that the Nusselt number does not significantly depend on the aspect ratio in the range of φ investigated contrary to what has been previously reported for wider plates.     

A simplified approach for sheet forming processes design

A new approach is developed to improve sheet forming parts and sheet forming processes design. In order to apply classical optimization methods, an energetic characterization of the global transformation of an elasto-plastic structure is proposed. After a brief review of thermostatics in elastoplastic laws, an energetic criterion is defined. With a geometrical definition of sheet forming processes, it is shown how to use this criterion to find the optimal displacement path between a flat blank and the part shape. Then, the classical assumptions of rigid-plastic behaviour and of thin shell geometry are introduced. Eventually, the criterion is used to define a formability criterion, for use at the preliminary design stage of parts. This paper concludes with numerical applications of the approach and analysis of formability criterion applications.     

ATM switching and CPE adaptation in the North Carolina InformationHighway

This article describes the approach which has been used to implement a sector of the information highway throughout the state of North Carolina, with specific attention focused on the functionality of the equipment that comprises the North Carolina Information Highway (NCIH). This implementation of this information highway is based on ATM technology, used in both the switching systems of the network and the customer premises equipment (CPE). The large ATM switching systems provide the extensive number of connections that are predicted for the information highway. Multiple services can also be supported on the ATM switches. The information streams for these different services can all be converted into ATM format using the appropriate ATM adaptation layer for transport through the ATM network. By being able to support multiple services, and transport them across common ATM facilities, the ATM switches offer the NCIH great flexibility in the applications that can be provided to the customers. Use of the ATM technology allows the NCIH to provide the backbone for various services. To provide the distance learning service application and other applications on the NCIH, ATM capabilities are also being provided in CPE on a service multiplexer     

Aerobic degradation by white‐rot fungi of trichloroethylene (TCE) and mixtures of TCE and perchloroethylene (PCE)

BACKGROUND: Trichloroethylene (TCE) and perchloroethylene (PCE) are considered among the most important groundwater pollutants around the world. These compounds are usually found together in polluted environments but little is known about the ability of microorganisms to simultaneously degrade TCE and PCE. RESULTS: Data showed that several species of white‐rot fungi, including Trametes versicolor, Ganoderma lucidum, and Irpex lacteus, degrade substantial levels of TCE in pure culture. T. versicolor was chosen for further study since it degraded higher levels of TCE than the other organisms. Initial glucose concentration and reoxygenation of samples increased the amount of TCE dechlorination, but no significant difference in percentage TCE degradation was observed. T. versicolor was able to degrade 34.1 and 47.7% of PCE and TCE added as mixtures (containing 5 and 10 mg L⁻¹, respectively). CONCLUSIONS: The degradation ability of TCE was extended to other species of white‐rot fungi. Percentage degradation as well as chloride release from mixtures of TCE and PCE showed that T. versicolor degrades mixtures of TCE and PCE almost as well as its ability to degrade individually added TCE or PCE. The results suggest the potential promise of T. versicolor for bioremediation of TCE and PCE in the environment. Copyright © 2008 Society of Chemical Industry     

Leveraging 802.11n frame aggregation to enhance QoS and power consumption in Wi-Fi networks

The Wi-Fi technology, driven by its tremendous success, is expanding into a wide variety of devices and applications. However, many of these new devices, like handheld devices, pose new challenges in terms of QoS and energy efficiency. In order to address these challenges, in this paper we study how the novel MAC aggregation mechanisms developed in the 802.11n standard can be used to enhance the current 802.11 QoS and power saving protocols. Our contribution is twofold. First, we present a simulation study that illustrates the interactions between 802.11n and the current 802.11 QoS and power saving protocols. This study reveals that the 802.11n MAC aggregation mechanisms perform better when combined with the power save mode included in the original 802.11 standard than with the 802.11e U-APSD protocol. Second, we design CA-DFA, an algorithm that, using only information available at layer two, adapts the amount of 802.11n aggregation used by a Wi-Fi station according to the level of congestion in the network. A detailed performance evaluation demonstrates the benefits of CA-DFA in terms of QoS, energy efficiency and network capacity with respect to state of the art alternatives.     

Human-Induced Neural and Mesenchymal Stem Cell Therapy Combined with a Curcumin Nanoconjugate as a Spinal Cord Injury Treatment

We currently lack effective treatments for the devastating loss of neural function associated with spinal cord injury (SCI). In this study, we evaluated a combination therapy comprising human neural stem cells derived from induced pluripotent stem cells (iPSC-NSC), human mesenchymal stem cells (MSC), and a pH-responsive polyacetal–curcumin nanoconjugate (PA-C) that allows the sustained release of curcumin. In vitro analysis demonstrated that PA-C treatment protected iPSC-NSC from oxidative damage in vitro, while MSC co-culture prevented lipopolysaccharide-induced activation of nuclear factor-κB (NF-κB) in iPSC-NSC. Then, we evaluated the combination of PA-C delivery into the intrathecal space in a rat model of contusive SCI with stem cell transplantation. While we failed to observe significant improvements in locomotor function (BBB scale) in treated animals, histological analysis revealed that PA-C-treated or PA-C and iPSC-NSC + MSC-treated animals displayed significantly smaller scars, while PA-C and iPSC-NSC + MSC treatment induced the preservation of β-III Tubulin-positive axons. iPSC-NSC + MSC transplantation fostered the preservation of motoneurons and myelinated tracts, while PA-C treatment polarized microglia into an anti-inflammatory phenotype. Overall, the combination of stem cell transplantation and PA-C treatment confers higher neuroprotective effects compared to individual treatments.     

Infiltration and Top Seed Growth-Textured YBCO Bulks With Multiple Holes

The recently reported hole-patterned YBa₂Cu₃O _y (Y123) bulks with improved superconducting properties are highly interesting from material quality and application variety points of view. It is well known that the core of plain bulk superconductors needs to be fully oxygenated and some defects like cracks, pores, and voids must be suppressed in order that the material can trap a high magnetic field or carry a high current density. To minimize the above defects, we have used a combination of standard superconducting ceramic processing and an infiltration technique to prepare regularly perforated YBa₂Cu₃O _y (Y123) bulk superconductors. This process leads to negligible shrinkage upon annealing and a uniform distribution of Y211 inclusions. Texture was evidenced by neutron pole figure measurements. Flux mapping was used to verify the superconducting homogeneity of the samples and to investigate the field-trapping ability. In addition, the textured drilled samples were reinforced using resin or metal impregnation and the influence of the different processing steps on the hardness of the materials has been investigated.