卷取温度对45带钢组织和性能影响的实验研究

研究了不同的卷取温度对45带钢组织和性能的影响,结果表明:随卷取温度的升高,试验钢的强度和硬度降低,塑性提高,且变化幅度较大;当卷取温度在珠光体转变开始温度以上时,产品组织为近似平衡转变的铁素体和珠光体组织,该钢具有较低的强度、硬度和优异的塑性特点,提高了产品的加工性能。     

Hyperbaric storage at and above room temperature of a highly perishable food

Hyperbaric storage at naturally variable room temperature (RT) conditions (18–21 °C) and above (30 °C) was evaluated as a possible new food preservation method, regardless of temperature. Preservation of watermelon juice (used as a case study of a highly perishable food) at RT and 5 °C at atmospheric pressure was compared to preservation under 100 MPa at RT. After 8 h of hyperbaric storage at 100 MPa, the initial microbial loads of the watermelon juice were reduced by 1 log unit for total aerobic mesophiles, and 1–2 log units for Enterobacteriaceae and yeasts and moulds, to levels of about 3 log units for the former and below the detection limit for the latter, and remained thereafter unchanged up to 60 h. Similar results were obtained at 30 °C at 100 MPa after 8 h. At atmospheric pressure at RT (24 h) and 30 °C (8 h), microbial levels were already above quantification limits and unacceptable for consumption. Furthermore, pressure attenuated the increase in titratable acidity verified at atmospheric pressure, but caused higher colour changes, especially a higher lightness and a lower browning degree. Post-hyperbaric storage at 5 °C revealed an extended shelf life, as an additional benefit of hyperbaric storage. These results show that hyperbaric storage is a very promising food preservation methodology.     

MAC finite difference scheme for Stokes equations with damping on non-uniform grids

In this paper, we consider the numerical methods for stationary Stokes equations with damping. The mark and cell(MAC) method has been applied to discretize the problem on non-uniform grids. We establish the LBB condition and the stability for the MAC scheme. Then we obtain the second order super-convergence in L2 norm for both velocity and pressure on non-uniform grids. We also obtain the second order convergence for some terms of H1 norm of the velocity, and the other terms of H1 norm are second order convergence on uniform grids. Numerical experiments using the MAC scheme show agreement of the numerical results with theoretical analysis.     

深层优质碎屑岩储层全生命周期分析方法论

油气勘探领域的深层是指沉积盆地中埋深在3 500~4 500 m及以深的地层。在含油气盆地的深层碎屑岩储层中，优质储层是重要的勘探目标。优质储层具有大量孔隙，其形成与沙或砂岩的沉积条件、埋藏方式、区域温压场、膏盐岩效应等多种因素有关。通过系统研究全球不同区域不同时代不同类型深层碎屑岩储层，提出优质深层碎屑岩储层的全生命周期研究方法，即从储层形成演变的全部时间出发，将深部储层的形成过程划分为早期剥蚀搬运沉积阶段、中期埋藏阶段、中期或/和晚期改造阶段，从全生命周期的尺度分阶段综合分析深层碎屑岩储层的形成及演化过程，推演在地质历史时期中的优质储层演化时序及发育阶段、分布位置。     

XPloreRank: exploring XML data via you may also like queries

World Wide Web - In many cases, users are not familiar with their exact information needs while searching complicated data sources. This lack of understanding may cause the users to feel...     

Development of a creep‐free stress‐strain law for fire analysis of steel structures

This paper presents a practical procedure for obtaining creep‐free stress‐strain laws for steel exposed to fire, on the basis of codified stress‐strain laws that consider creep implicitly. The applicability of the proposed procedure has been tested on two commonly used stress‐strain laws for steel at elevated temperature, the Eurocode 3 law and a Ramberg–Osgood model, both of which have implicit consideration of creep. The simulation of two published steel coupon experiments on steel of grades S275 and S355 shows that both the Eurocode and Ramberg–Osgood stress‐strain laws produce inaccurate predictions of creep in fire at elevated temperatures. The proposed procedure was thereby used to extract the implicit creep according to the heating rates of the transient coupon tests and to derive the creep‐free stress‐strain laws. It has been shown that, by combining the creep‐free stress strain law obtained by the proposed methodology with an explicit creep model, a more realistic prediction of steel behaviour in the selected coupon test studies can be achieved. Copyright © 2015 John Wiley & Sons, Ltd.     

盐酸工序冷却系统技术改造

针对盐酸生产工序冷却系统存在的换热效率低、设备管道腐蚀严重、耗能高等问题进行了技术改造,并分析了改造后效益。     

Metal Ion‐Catalyzed Hydrothermal Liquefaction of Calcium Lignosulfonate in Subcritical Water

Three metal ion catalysts, namely, Na⁺, K⁺, and Ca²⁺, were tested to improve liquefaction of calcium lignosulfonate, and their effects on product distribution were specifically investigated. Results showed that metal ion catalysts favored the production of hydrogen as well as of phenolic compounds. The total contents of phenolic compounds catalyzed by metal ions were generally higher than 75 %. The catalysis abilities of Na⁺ and K⁺ were better than that of Ca²⁺. The neutral‐alkaline condition was much more beneficial to calcium lignosulfonate liquefaction. Compared to the hydrochars with Na⁺ and K⁺ catalysts, the hydrochars with Ca²⁺ catalyst had higher carbon content and a higher heating value.     

Microcracks size growth prediction based on microdefects nucleation number

The mechanical reason for rock and concrete failure is trans-scale fracture, which can be divided into three phases: (1) microcrack evolution, (2) macrocrack nucleation, (3) macrocrack growth and run-through. Using the idea that a microcrack could be regarded as a well-organized aggregation of nucleated microdefects, the size growth model of the largest microcrack based on the accumulated number of microdefect nucleation is established. In order to test the validity of the model, trans-scale fracture of a plate made of heterogeneous material is numerically simulated to display the microcrack’s evolution. Statistical analysis of the number and sizes of the microcracks indicates that the predicted size of the largest microcrack according to the model is in close agreement with the measured crack size prior to peak stress, but not at all close to the measured values after the peak. At the end of the paper, some remaining problems are proposed for the further work.     

城市轨道交通专业群现代学徒制的探索与实践

文章基于目前国内轨道交通类与非轨道交通类专业实施现代学徒制现状进行剖析,结合我校城市轨道交通专业群,开展现代学徒制的探索与实践,提出双授、双边鉴定等创新方法。