In situ synchrotron X-ray studies on copper-nickel 5 V Mn oxide spinel cathodes for Li-ion batteries

Partial substitution of Mn in lithium manganese oxide spinel materials by Cu and Ni greatly affects the electrochemistry and the cycle life characteristics of the cathode. Substitution with either metal or a combination of both metals in the spinel lattice structure reduces the 3.9-4.2 V potential plateaus associated with the conversion of Mn³⁺ to Mn⁴⁺. Higher potential plateau associated with oxidation of the substituted transition elements is also observed. These substituents also significantly alter the onset of Jahn-Teller distortions in the 3 V potential plateau. Synchrotron based in situ X-ray absorption (XAS) was used to determine the exact nature of the oxidation state changes in order to explain the overall observed capacities at different potential plateaus. The studies on LiCu_0.5Mn_1.5O₄ show single phase behavior in the 4-5 V potential region with a good cycle life. Lower cycle life characteristic observed in cycling LiNi_0.5Mn_1.5O₄ and LiNi_0.25Cu_0.25Mn_1.5O₄ versus Li metal are ascribed to coexistence of several phases in this potential region. However, LiCu_0.5Mn_1.5O₄ shows onset of Jahn-Teller distortions in the 3 V potential plateau, in contrast to LiNi_0.5Mn_1.5O₄ and LiNi_0.25Cu_0.25Mn_1.5O₄ cathode materials.     

Study of stability of high‐temperature polyimides using TG/MS technique

The oxidative stability of the carbon fiber‐reinforced composite of polyimide was examined, in real time, using the evolved gas analysis techniques. Off‐gas degradation products suggested the onset temperature for chain scissions to be fairly low at about 190–220°C. Based on the off‐gas products present and the trend of their release, the composite degradation mechanism appeared to be similar between 190 and 371°C, thereby marking 371°C to be the highest accelerated aging temperature for its long‐term lifetime prediction. Beyond 371°C, different degradation mechanisms would apply. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1219–1227, 2002     

The kinetics of desorption in the presence of a gas phase of the desorbing molecule: CO/Re(001)

TPD/Exchange from CO/Re(001) in a gas ambience showed that the absolute rate of desorption depends on the gas pressure and has a first plus second order rate law. It is proposed that desorption is a two step process from the adsorbed state to a stable intermediate which is itself weakly adsorbed.     

Interfacial Peeling Moments and Shear Forces at Free Edges of Multilayers Subjected to Thermal Stresses

Stresses normal to interfaces, i.e., interfacial peeling stresses and interfacial shear stresses, exist locally at edges of multilayers because of both the thermal mismatch between layers and the free-edge effect. These peeling and shear stresses can result in modes I and II edge delamination, respectively. However, because of the complexity of the problem, exact closed-form solutions for these stresses are very difficult if not impossible to derive even for bilayered systems. Hence, instead of the detailed stress field at edges, both the interfacial peeling moment resulting from the localized peeling stresses and the interfacial shear force resulting from the localized shear stresses are analyzed here. Exact closed-form solutions for the peeling moment and the shear force at each interface in elastic multilayered systems are derived. To illustrate the application of present closed-form solutions, specific results are calculated for five-layered thermal barrier coating systems, and a finite-element analysis is also performed to confirm the analytical results.     

Effect of solution properties on nanofibrous structure of electrospun poly(lactic‐co‐glycolic acid)

Electrospinning of poly(lactic‐co‐glycolic acid) (PLGA) in chloroform or 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was investigated, focusing on its solution parameters, to develop nonwoven biodegradable nanofibrous structures for tissue engineering. PLGA nanofibers were obtained by electrospinning of 15 wt % PLGA solution and the resulting average fiber diameters were varied with the range of 270–760 nm, depending on solution property. When small amounts of benzyl triethylammonium chloride (BTEAC) was added to the PLGA/chloroform solution, the average diameter was decreased from 760 to 450 nm and the fibers were densely amounted in a straight shape. In addition, the average fiber diameter (270 nm) of nanofibers electrospun from polar HFIP solvent was much smaller than that (760 nm) of nanofibers electrospun from nonpolar chloroform solvent. Therefore, it could be concluded that conductivity or dielectric constant of the PLGA solution was a major parameter affecting the morphology and diameter of the electrospun PLGA fibers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1214–1221, 2006     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

设计企业项目管理信息系统的实现

结合国家“十五”重点科技攻关计划“城市规划、建设、管理与服务数字化工程”项目,天津水泥工业设计研究院承担了其中的“勘察设计企业信息化应用软件示范应用”专题,并获批立项,签署了专题任务书。两年来,院项目实施小组和软件公司进行了长期、紧密的合作,遵照标准化、系统化和集成化的原则,共同搭建了“工程协同设计管理平台”。在软件功能上,实现了设计企业管理信息系统的主要功能;在软件技术上,采用了目前最流行的软件技术,结合现代项目管理方法,为设计企业提供了组态灵活,方便实用,具有良好扩展性及开放性的软件产品。目前,该系统已经在部分工程项目上全面运行,取得了预期的效果。     

Forced convection heat transfer in low prandtl number turbulent flows: Influence of axial conduction

The effect of axial conduction was investigated for turbulent heat transfer in a round pipe with uniform wall temperature. Exact solutions were obtained by using the method of separation of variables for the two cases with and without the axial conduction term. The solutions show that the effect of axial conduction is important at low Peclet numbers, say Pe < 100, but negligible in the thermally fully-developed region. Also, the fully developed Nusselt numbers depend only on Reynolds number at low Peclet numbers and the interpolation formula is proposed: which fits the calculated data well in the liquid metal range 0.001 < Pr < 0.022 for Pe < 100.     

Effects of Purified Persimmon Tannin and Tannic Acid on Survival and Reproduction of Bean Bug, Riptortus clavatus

We evaluated the effects of tannic acid and purified perrsimmon tannin on survival and reproduction of bean bugs, Riptortus clavatus.Feeding behavior of R. clavatus was also examined on sweet (cv. Fuyu) and astringent (cv. Chongdosi) persimmon fruits. Soluble tannin in sweet persimmon fruits decreased from 3% in early June to 0.5% in late September, but it increased from 2 to 8% during the same period in astringent persimmon fruits. More bugs visited sweet than astringent persimmon. Numbers of piercing/sucking spots were higher on sweet than on astringent persimmon. When fed 1 and 3% solutions of persimmon tannin, adult bugs ingested only 64.1 and 9.5% of the amount of water ingested by those offered the control (distilled water). Amounts of persimmon tannin ingested by the adult bugs were 6.5 and 2.8 times higher at 1 and 3% tannin solutions compared to a 0.1% solution. Persimmon tannin exerted negative effects on survival and reproduction of R. clavatus at higher concentrations (1 and 3% solutions). Feeding of R. clavatus adults decreased with increasing tannin concentrations. When results from both sexes were pooled, 50% mortality was achieved at 11 and 4 days after treatment with the 1 and 3% tannin solutions, respectively. Reproduction decreased with 1% tannin, and no eggs were produced with 3% tannin solution. Tannic acid was similar in its effects on R. clavatus. All nymphs died 14, 12, and 7 days after feeding on 0.1, 1, and 3% tannic acid, respectively. Adults were less sensitive than nymphs, and their survival was not affected by 0.1% tannic acid. However. 1 and 3% tannic acid solutions were fatal. Survivorship decreased to 50% at 11 and 6 days after supplying tannin solutions of 1 and 3% concentrations. Higher concentrations (1 and 3%) resulted in reduced reproduction, as was seen with persimmon tannin. Our data may explain why R. clavatus does not invade sweet persimmon orchards until late July, when concentrations of soluble tannin are low enough to allow them to feed.     

A study on the deposition of pyrolytic carbons from hydrocarbons

A new method for forming isotropic, laminar, and columnar pyrolytic carbons is proposed. For this, a low RPM (below 2.4 rpm) tumbling bed has been used to deposit pyrolytic carbons from hydrocarbon gases. All deposits were made on graphite substrates from propane and methane at a constant temperature of 1200°C. The microstructures of the pyrolytic carbons deposited were dependent on the flow pattern of the reactant gas, the rpm of the reactor, the hydrocarbon concentration, the nature of the hydrocarbon, and the geometry of the bed. Isotropic pyrolytic carbon is formed under deposition conditions where homogeneous nucleation occurs in the gas phase and at the gas flow conditions where the gas-borne droplets can collide on the substrate. Laminar carbon is formed under deposition conditions where homogeneous nucleation does not occur in the gas phase and at gas flow conditions where the carbon species existing in the bulk of the gas phase can collide on the substrate. Columnar carbon is formed when any carbon products existing in the bulk of the gas phase cannot collide on the substrate. The suggested deposition mechanism can also be applied to pyrolytic carbons deposited in a fluidized bed or in a stationary bed. In particular, isotropic carbon can be obtained even in a stationary bed if the requirements for the deposition of the isotropic carbon described above are satisfied.