Pathway engineering for the production of aromatic compounds in Escherichia coli

The standard enzymatic assay for quantification of D-sorbitol in plasma was adapted to the automatic analyzer Cobas Mira S. In the assay, NAD (reagent) in the presence of sorbitoldehydrogenase (SDH; start reagent) converts D-sorbitol to fructose with formation of NADH, which was detected automatically as the difference between the first and last readings at 340 nm. The sample blank values for each specimen were subtracted to exclude both endogenous D-sorbitol and sugars, which also react as substrates for SDH. The method is simple, rapid (40 samples/h), precise down to endogenous concentrations (coefficient of variation < 5%; limit of determination: 0.38 mg/L) and linear up to 100 mg/L. Samples with higher D-sorbitol concentrations were estimated after dilution. The method was used to measure disposition curves of sorbitol in volunteers after a single intravenous dose of 0.8 g sorbitol.     

用于高压电容器的SrTiO3基陶瓷

报道ＳｒＴｉＯ３基陶瓷的制备方法和介电性质，给出了用此种陶瓷制成的高压电容器的试验结果，并对它位进行了讨论。     

一种实验炼钢渣的穆斯堡尔谱研究

一种实验炼钢渣不同炉次样品的室温透射穆斯堡尔谱由两组裂距较大的四极分裂双峰和一组裂距较小的双峰组成，它们分别相应于具有不同微观环境的Ｆｅ＾２＋和Ｆｅ＾３＋。参照文献中已知ＦｅｘＯ的穆斯堡尔谱数据，可确定该渣中的主要含铁相为ＦｅｘＯ。Ｘ射线衍射相分析给出相同的结果。按亚谱的面积比计算出Ｆｅ＾２＋和Ｆｅ＾３＋的相对含量分别为８５％和１５％左右。进一步选取与样品晶体结构相联系的原子簇模型。用ＭＳ－Ｘａ方     

精密角位移传感器及其可靠性研究

从理论上探讨了磁阻率效应，叙述了精密角位移传感器的工作原理及结构设计。传感器的分辨率已达０．０１°，通过可靠性寿命试验，传感器的失效率λ（ｔ）＜１×１０－７／ｈ。     

微波介电陶瓷与微波磁介电陶瓷

微波陶瓷的应用越来越受到人们的重视。文章概括介绍了二元系微波介电陶瓷ＢａＯ－ＴｉＯ２和微波磁性陶瓷ＢａＯ—Ｆｅ２Ｏ３，以及三元系微波磁介电陶瓷ＢａＯ—Ｆｅ２Ｏ３—ＴｉＯ２的研究情况，并对预期进展作了展望。     

管内机器人研究中的几项新技术

介绍了我们研制的管内机器人中应用的具有创新性的三项技术：１．轮式全主动新型行走机构；２．内壁环带视觉装置；３．新型离心喷涂器。     

Object-extending class transformations

Reorganisation and evolution of class hierarchies is important for object-oriented system development and has received considerable attention in the literature. The contributions of this paper are: (1) a formal study of a set of extension relations and transformations on class hierarchies; (2) a presentation of a small set of primitive transformations which form a minimal and complete basis for the extension relations; and (3) an analysis of the impact of these transformations at the object level.The study leads to a better understanding of evolution and reuse of object-oriented software and class hierarchies. It also provides a terminology and a means of classification for design reuse. The theory presented in this paper is based on the Demeter data model, which gives a concise mathematical foundation for classes and their inheritance and part-of relationships. Parts of the theory have been implemented in the Demeter System ^TM C++, a CASE tool for object-oriented design and programming.     

Numerical detection and continuation of saddle-node homoclinic bifurcations of codimension one and two

An extension of an existing truncated boundary-value method for the numerical continuation of connecting orbits is proposed to deal with homoclinic orbits to a saddle-node equilibrium. In contrast to previous numerical work by Schecter and Friedman and Doedel, the method is based on (linear) projection boundary conditions. These boundary conditions, with extra defining conditions for a saddle-node, allow the continuation of codimension-one curves of saddle-node homoclinic orbits. A new test function is motivated for detecting codimension-two points at which loci of saddle-nodes and homoclinic orbits become detached. Two methods for continuing such codim 2 points in three parameters are discussed. The numerical methods are applied to two example systems, modelling a DC Josephson junction and CO oxidation. For the former model, existing numerical results are recovered and extended; for the latter, new dynamical features are uncovered. All computations are performed using AUTO.     

Mass customization of medical devices and implants: state of the art and future directions

The medical field is one in which the need for customization can be clear cut, as providing tailored devices and implants for unique physiologies can provide for a better overall treatment than the use of 'off the shelf' devices and implants. Customization in the production of medical products can be roughly divided into consideration of medical devices, and of implantable parts or systems. The present paper outlines the current state of the art in both of these areas, presents details of projects that are ongoing at the University of Leeds and outlines future research directions.