多孔β-TCP陶瓷药物载体的制备与体外释药速率的研究

本文用注浆成形的方法制备了以β-TCP为主晶相的多孔药物载体，体外测定了利福平的释药速率。实验结果表明，利福平在模拟体液中能够达到稳定的释放，可以作为骨结核手术后的辅助治疗。多孔β-TCP药物载体有望成为一种理想的药物缓释载体。     

Effect of cobalt oxide on surface structure of alumina supported molybdena catalysts studied by in situ Raman spectroscopy

A set of Co promoted 10% Mo/Al₂O₃ samples have been characterized by means of Raman spectroscopy under ambient as well as in situ dehydrated conditions. Under ambient conditions, the degree of the polymerization of surface molybdenum oxide species decreases with increasing Co loading. Under dehydrated conditions, the polymeric molybdenum oxide species is absent with the addition of only 0.2% Co. At low Co loadings (2%), before the formation of CoMoO₄ compound, the spectral features are very similar under ambient conditions. Dehydration causes the upward shift of the Mo=O symmetric stretching mode. A broad band around 920–930 cm^–1 was thus observed. This band has been suggested to be associated with the Co-Mo interaction species. In contrast to crystalline CoMoO₄, this species shows a reversibility on H₂ reduction-O₂ reoxidation treatments. From the results obtained, it is proposed that cobalt oxide interacts with the most polymerized molybdenum oxide species to form Co-Mo interaction species and/or crystalline CoMoO₄; therefore, the amount of the surface molybdenum oxide species decreases with a change in the molecular structure as a function of the Co concentration.     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

我国烧碱市场分析与展望

回顾了2005年我国烧碱的生产与市场消费情况,分析了2006年国内烧碱市场形势,对“十一五”期间我国烧碱市场总体趋势进行了展望。     

反相高效液相色谱法测定meso-四苯基卟啉钴的纯度

采用反相高效液相色谱法测定合成meso-四苯基卟啉钴的纯度;以甲醇乙腈二氯甲烷(体积比为55∶35∶10)为流动相,ShimpackCLCODS柱(150mm×6.0mmi.d,5μm)为分离柱,流速为1.5mL/min,检测波长420nm;meso四苯基卟啉钴的测定在1.0～10μg/mL时线性关系良好(相关系数r=0.9993),加标回收率为97.03%～101.42%,重复进样的相对标准偏差RSD为0.64%～2.92%(n=5)。方法的准确度高,精密度好,实际应用效果好。     

镀液流速对碳化硅微粒与铜共沉积的影响

本文利用易于控制流速的旋转圆盘电极研究了SiC微粒与Cu的共沉积。得出了在不同镀液流动速度下镀得的复合镀层中微粒含量与镀液中微粒浓度以及与电流密度之间的关系曲线,进而探讨了镀液流速对Cu-SiC共沉积的影响。镀液流速通过影响微粒与阴极之间的弱吸附影响微粒在阴极表面的停留,从而对Cu-SiC复合电沉积过程产生很大影响。     

四种杀菌剂对枸杞黑果病的防治效果

枸杞黑果病是枸杞产区的主要病害．发病后造成黑花、黑蕾和黑果，使枸杞产量降低，品质变劣。为探明四种杀菌剂对枸杞黑果病的防治效果及最佳剂量，2003年对下述四种杀菌剂进行了田间药效对比试验，调查防效结果如下：20％三苯基醋酸锡WP450～281g／hm^2(以有效成分计，下同)，20％氟硅唑EC21．08g／hm^21．5％噻霉酮EW16、88～21．08g／hm^2、40％氟硅唑EC450g／hm^2和70％甲基托布津WP787．5g/hm^2对枸杞黑果病防效均在88．25％以上。经LSD检验各处理间防效无显著差异。     

SiC晶须对Si3N4陶瓷基复合材料机械强度的影响

制备了含10vol％,20vol％及30vol％SiC晶须的Si_3N_4基复合材料,对其室温及高温机械强度的测试研究表明,SiC晶须对基体的高温机械性能有明显的增强作用。含20vol％SiC晶须的复合材料1200℃下强度达780MPa,比基体材料提高50％。通过SEM和TEM研究,讨论了SiC晶须增强的原因。     

羟基烷基磺酸镀液电镀Sn—Pb合金的研究

我国自行研制生产的羟基烷基磺酸电镀Sn-Pb合金镀液已经在部分厂家投产使用.生产实践证明,该镀液能获得不同铅含量的、可焊性优良且镀层结晶细致而光亮的Sn-Pb合金镀层.本研究重点测定了该镀液的电化学性能,如阴极电流效率、分散能力及深镀能力.并对添加剂的作用进行了研究探讨.     

金安金沙江悬索桥隧道式锚碇变形破坏机制研究

隧道式锚碇的变形破坏机制涉及到结构与围岩的协同作用问题。以华丽高速公路金安金沙江悬索桥两岸隧道锚变形破坏机制为研究对象,利用工程类比法评价了其稳定性控制要素,设计了超载数值试验。根据塑性区的扩展过程确定了施工安全监测和需要采取预加固的重点部位,确定了隧道锚围岩的破坏模式。根据锚面监测点位移由mm到cm量级突变确定的两岸锚岩系统极限荷载均为6~8倍设计缆力,则锚岩系统的设计承载力取3倍设计缆力下变形安全是有保障的。丽江岸塑性区在10 P下贯通;华坪岸塑性区在14 P下贯通。设计缆力作用下,丽江岸锚碇最大位移1.5 mm、围岩1.2 mm、地表0.5 mm;华坪岸锚碇最大位移1.7 mm、围岩1.5 mm、地表0.7 mm,其响应顺序为后锚面监测点前锚面监测点锚碇中间岩体地表点,可作为后期结构及围岩安全监测布点和预警的参考,也证明当前设计缆力下变形和强度均是安全的。