250℃下时间效应对PAN纤维热氧稳定化反应的影响及关联

借用傅里叶变换红外光谱(FT-IR)、元素分析(EA)、X射线衍射(XRD)和示差扫描量热分析(DSC)等手段,对比研究了热氧稳定化过程中250℃下时间效应与两种聚丙烯腈(PAN)共聚纤维及其炭纤维结构和性能之间的关联。研究结果表明,PAN纤维在250℃温区内停留超过9min时,最终热氧稳定化纤维的环化度(RCI)、体密度和芳构化指数(AI)的增加速率开始变小;炭纤维的孔含量(Vp)值与内部微晶的d002值开始增大,微晶排列的规整程度变差,缺陷增多,拉伸强度开始降低。     

Enhanced π–π Interactions of Nonfullerene Acceptors by Volatilizable Solid Additives in Efficient Polymer Solar Cells

Fine‐tuning of the nanoscale morphologies of the active layers in polymer solar cells (PSCs) through various techniques plays a vital role in improving the photovoltaic performance. However, for emerging nonfullerene (NF) PSCs, the morphology optimization of the active‐layer films empirically follows the methods originally developed in fullerene‐based blends and lacks systematic studies. In this work, two solid additives with different volatilities, SA‐4 and SA‐7, are applied to investigate their influence on the morphologies and photovoltaic performances of NF‐PSCs. Although both solid additives effectively promote the molecular packing of the NF acceptors, due to the higher volatility of SA‐4, the devices processed with SA‐4 exhibit a power conversion efficiency of 13.5%, higher than that of the control devices, and the devices processed with SA‐7 exhibit poor performances. Through a series of detailed morphological analyses, it is found that the volatilization of SA‐4 after thermal annealing is beneficial for the self‐assembly packing of acceptors, while the residuals due to the incomplete volatilization of SA‐7 have a negative effect on the film morphology. The results delineate the feasibility of applying volatilizable solid additives and provide deeper insights into the working mechanism, establishing guidelines for further material design of solid additives.     

Effect of doping cobalt on the micro-morphology and electrochemical properties of birnessite MnO2

Birnessite-type MnO₂ nanoparticles are synthesized by mixing KMnO₄ solution directly with ethylene glycol under ambient conditions. When cobalt exists in the solution, the micro-morphology of the products transforms from conglomeration to dispersive state. The result of transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE-SEM) shows that the product is constructed with nanosphere in sizes of ca. 40 nm. These nanospheres are twisted by nanorods clusters. X-ray diffraction (XRD) pattern shows that the products are birnessite-type. The electrochemical properties of the prepared materials are studied using cyclic voltammetry (CV) and galvanostatic charge–discharge test in aqueous electrolyte. The product shows a very high specific capacity of 326.4 F g⁻¹. These results indicate that cobalt has great effects on the micro-morphology and electrochemical properties of manganese dioxide.     

Genome-Wide Association Study Identifies a Rice Panicle Blast Resistance Gene,Pb2, Encoding NLR Protein

Rice blast is one of the main diseases in rice and can occur in different rice growth stages. Due to the complicated procedure of panicle blast identification and instability of panicle blast infection influenced by the environment, most cloned rice resistance genes are associated with leaf blast. In this study, a rice panicle blast resistance gene, Pb2, was identified by genome-wide association mapping based on the panicle blast resistance phenotypes of 230 Rice Diversity Panel 1 (RDP1) accessions with 700,000 single-nucleotide polymorphism (SNP) markers. A genome-wide association study identified 18 panicle blast resistance loci (PBRL) within two years, including 9 reported loci and 2 repeated loci (PBRL2 and PBRL13, PBRL10 and PBRL18). Among them, the repeated locus (PBRL10 and PBRL18) was located in chromosome 11. By haplotype and expression analysis, one of the Nucleotide-binding domain and Leucine-rich Repeat (NLR) Pb2 genes was highly conserved in multiple resistant rice cultivars, and its expression was significantly upregulated after rice blast infection. Pb2 encodes a typical NBS-LRR protein with NB-ARC domain and LRR domain. Compared with wild type plants, the transgenic rice of Pb2 showed enhanced resistance to panicle and leaf blast with reduced lesion number. Subcellular localization of Pb2 showed that it is located on plasma membrane, and GUS tissue-staining observation found that Pb2 is highly expressed in grains, leaf tips and stem nodes. The Pb2 transgenic plants showed no difference in agronomic traits with wild type plants. It indicated that Pb2 could be useful for breeding of rice blast resistance.     

不同地应力下的地下硐室动态特征分析

采用FLAC3D对地震动荷载作用下不同地应力状态的地下岩体硐室的动态特性进行了初步分析。分析结果表明,地震荷载作用下,硐室位移随地应力侧压系数的增加明显减小,地应力侧压系数λ<1时的硐室位移量值随侧压系数的变化幅度明显大于地应力侧压系数λ>1时的情况;当侧压系数λ<1,随剪切波入射角的变化,硐室测量点位移响应先增加后减小;而当侧压系数λ>1,随剪切波入射角的增加,硐室测点位移先减小后增加,同时随地应力侧压系数的增加有减小的趋势。     

人工智能技术课程实践教学改革

根据人工智能技术课程的教学情况,从教学内容、教学方法、教学案例、考核方式、培养实践能力五个方面探讨教学改革.提出在不断更新教学内容和"课堂讲授-课下辅导"模式的基础上,加强网络资源的利用,增加贯穿整个教学过程的分组报告,设计出提高创新能力的教学案例,开展具有多元考核方式以及循序渐进的动态实验设置模式的实践教学改革,以有...     

Annealing process of fine grained co-stabilised (Y,Mg)-PSZ/MgAl2O4 ceramics

Abstract

Co-stabilised (Y,Mg) partially stabilised zirconia (PSZ) ceramics with MgAl₂O₄ spinel additions were produced, with industrial zirconia as the main starting material. Powders were prepared using a mechanical milling–mixing process. The effect of the annealing process on the mechanical properties, phase compositions, and microstructure of fine grained PSZ ceramics was investigated.