三种骨灰瓷原料的制备与晶相结构

本实验采用牛、猪、羊三种骨头通过高温煅烧制备骨灰瓷原料。采用XRD和SEM方法表征三种骨灰料的晶相结构和显微结构。实验结果表明 :三种骨灰料经 14 0 0℃煅烧后均存在Ca1 0 (PO4 ) 6(OH) 2 、α -Ca3(PO4 ) 2 种晶相。在 132 0℃煅烧的三种骨灰料中 ,按牛、猪、羊顺序 ,Ca1 0 (PO4 ) 6 (OH) 2 含量分别为 87 2 %、89 1%、71 9% ;β-Ca3(PO4 ) 2 含量最高 ,其可塑性和成瓷性能好 ,从晶相上考虑选择羊骨为较佳的骨灰瓷原料。从白度和透光度上考虑选择牛骨为较佳原料。随着煅烧温度升高 ,三种骨头料的β-Ca3(PO4 ) 2 含量增加 ,羊骨和牛骨中的Ca1 0 (PO4 ) 6 (OH) 2 含量减少 ,而猪骨的Ca1 0(PO4 ) 6 (OH) 2 含量反而增加。因此煅烧温度升高对羊骨和牛骨有利 ,而对猪骨不利     

Humidity sensitivity of polypyrrole and polypyrrole/SBA‐15 host–guest composite materials

Polypyrrole (PPY) and PPY/SBA‐15 host–guest composite materials have been prepared using chemical synthesis route and characterized by XRD, IR, N₂ adsorption–desorption isotherms, and SEM. The humidity sensitive properties (HSP) of this kind of materials have been studied by analyzing the variation curve of impedance as a function of relative humidity. It was found that the PPY/SBA‐15 host–guest composites materials exhibit better HSP than that of the corresponding pure PPY. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3301–3305, 2006     

基于Monte Carlo随机模拟的综合交通网络布局评价与决策方法

针对综合交通网络评价指标权重及属性值具有主观性和随机性的特点,提出了基于模拟运算的布局规划方案排序选优的群体随机决策方法.仿真生成满足集结的多个专家对指标重要性偏好排序统计分布的权重,同时考虑交通需求的不确定性对指标值的影响,结合客观熵权计算方案的综合评价值,由多次模拟得到的排序优势度确定方案的优劣差异.根据设计的仿真流程通过算例说明了方法应用的有效性,评价中考虑了主客观因素及随机性特征,可以为网络布局提供科学决策依据.     

时间触发以太网的分布式任务负载均衡分配方法

对于以时间触发以太网(time-triggered Ethernet,TTE)为互连基础设施的分布式综合化系统,通过将各个任务的物理拓扑、虚拟链路拓扑等多种设计约束属性转化定义为代价函数。提出了一种将信息处理和通信任务指派并映射到分布嵌入式资源的方法,使设计者能够利用TTE网络通信的时间确定性机制,统一地安排处理任务和通信任务。采用模拟退火算法启发式求解优化问题,保证网络节点处理和节点间通信的负载均衡性。通过一个TTE网络拓扑下任务分配的案例,采用软件仿真的形式说明这种方法的适用性。     

二甲基亚砜一步法碳纤维用聚丙烯腈原丝生产工艺

叙述了二甲基亚砜一步法（高转化）高强碳纤维用聚丙烯腈原丝生产的工艺流程。着重讨论了聚合、纺丝的工艺控制。以及工艺控制对聚丙烯腈原丝和最终碳纤维性能的影响。按此工艺生产的聚丙烯腈原丝的质量完全符合高强碳纤维生产的需要。     

甲苯稀释对AlCl3-EMIC型离子液体电镀铝工艺氢脆性的影响

采用甲苯作为AlCl3-EMIC(1-乙基-3-甲基咪唑)型离子液体的稀释剂,其中纯态离子液体由物质的量比为2∶1的无水AlCl3和EMIC组成。对比了纯态和按稀释剂与离子液体体积比为1∶1稀释后电镀铝的外观、微观形貌和氢脆性。结果表明,采用甲苯稀释离子液体虽然可以降低镀液的黏度,改善镀层外观和微观形貌,但对离子液体电镀铝工艺的氢脆性有负面影响。     

Enhanced Thermal Stability of Zinc-Based Titanate (Dielectric) Ceramics Prepared by the Modified Sol–gel Route

A multi-component substitution of Co and Ni was incorporated into ZnTiO₃ to form pure hexagonal Zn_{1− x} (Co_1/2Ni_1/2) _x TiO₃ ( x =0,0.8,0.9,1.0) dielectric ceramic powders by a modified sol–gel route, following heat treatments at 600°C for 3 h and at 800°C for 6 h. Differential scanning calorimetry measurements revealed that the order of increasing thermal stability of solid solution compound Zn_{1− x} (Co_1/2Ni_1/2) _x TiO₃ was ZnTiO₃ (945°C), Zn_0.1Ni_0.9TiO₃ (1346°C), Zn_0.1(Co_1/2Ni_1/2)_0.9TiO₃ (1390°C), and Zn_0.1Co_0.9TiO₃ (>1400°C). Both the dielectric constant and loss tangent reached a maximum at x =0.8 and then decreased with solubility, x , and measurement frequency.     

A general non-local denoising model using multi-kernel-induced measures

Noises are inevitably introduced in digital image acquisition processes, and thus image denoising is still a hot research problem. Different from local methods operating on local regions of images, the non-local methods utilize non-local information (even the whole image) to accomplish image denoising. Due to their superior performance, the non-local methods have recently drawn more and more attention in the image denoising community. However, these methods generally do not work well in handling complicated noises with different levels and types. Inspired by the fact in machine learning field that multi-kernel methods are more robust and effective in tackling complex problems than single-kernel ones, we establish a general non-local denoising model based on multi-kernel-induced measures (GNLMKIM for short), which provides us a platform to analyze some existing and design new filters. With the help of GNLMKIM, we reinterpret two well-known non-local filters in the united view and extend them to their novel multi-kernel counterparts. The comprehensive experiments indicate that these novel filters achieve encouraging denoising results in both visual effect and PSNR index.     

Ink‐eliminated waste paper sludge flour‐filled polypropylene composites with different coupling agent treatments

Ink‐eliminated sludge flour (IESF), waste residue from the recycling treatments of waste paper, was utilized as a new kind of filler to reinforce polypropylene (PP) in this research work. Different coupling agents, including maleated anhydride grafted PP (MAPP), stearic acid (SA), and titanate (NDZ‐101), were used to increase the compatibility between IESF and PP. By using different measurements, the microstructure, morphology, thermal behaviors, and mechanical properties of the IESF/PP composites were investigated in detail. It was found that IESF, as a nucleation agent, not only induced the crystallization orientation of PP but also accelerate the crystallization rate of PP. Just as indicated in the experiments, the presence of IESF has shown the advantages of increasing the dimensional stability, the hardness and the flexural property, and the presence of coupling agents has a favorable effect on the improvement of dimensional stability. Moreover, the coupling agent has minor influence on the mechanical property, even causes some decrease in the impact strength. Among these three coupling agents, MAPP is found to be the best coupling agent for increasing the interfacial adhesion between IESF and PP, and the MAPP addition makes the PP composite possess the quickest crystallization rate and greatest tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 513–520, 2003     

抗疟新药——蒿甲醚胶囊稳定性的研究

蒿甲醚为我国首创的一种抗疟特效药。用３种方法对蒿甲醚胶囊的稳定性进行了考察，结果表明本品室温避光条件下至少可保存２ａ。