双电层电容器用沥青焦基活性炭的制备工艺条件对其孔结构及电化学性能的影响

以沥青焦为原料，KOH为活化剂在不同的工艺条件下制备了双层电容器用活性炭电极材料。分别考察了活化剂用量、活化时间、以及加入Cu、Ni催化活化等工艺条件对活性炭孔结构及作为双电层电容器电极的电化学性能的影响。结果表明：在实验范围内增加KOH用量及活化时间，活性炭的比表面积和比电容增加，比电容最高达到247F／g。添加Cu、Ni催化活化后活性炭的比表面积及比电容增加，高功率放电性能明显改善。     

水辅助注塑大直径介质导管制品的冷却分析

采用数学分析方法，通过假设、简化分析模型，用数学模型来表述物理模型，确定了水辅助注塑(VAIM)大直径介质导臂制品的冷却时间，并运用算例和国外试验的结果进行验证。结果发现：水辅助注射成型新工艺可以更加显著地缩短注塑周期，降低制件壁厚，允许制件有更大的实际直径。因此，VAIM技术可用来高效率地生产大直径、高质量、薄壁的介质导臂。     

New approach for the preparation of nanoporous polyorganosilicate low‐k films

The distribution of pores and the mechanical properties of materials are the key factors in preparing satisfactory low‐k films. In the present study, a kind of silsesquioxane‐polyethylene glycol (SSQ‐PEG) was synthesized and used as a template to make the distribution of pores more even in the low‐k films. The crosslinking density of films could be adjusted by the sol‐gel of tetramethoxysilane/dimethoxydimethylsilane with various proportions. The porosity of films could also be adjusted with different proportions of pendant PEG chains introduced. A dielectric constant as low as 2.1 had been achieved for nanoporous polyorganosilicate films with good tenacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1238–1243, 2007     

以废白土制备洗涤膏

植物油脱色用过的活性白土是含油的废白土 ,本文探索了一种充分利用废白土的方法。以强碱与废白土含的油按化学计量比进行皂化反应可得一种洗涤膏。这种洗涤膏主要适用机械工人洗手 ,也可用以清洗瓷砖等硬表面。通过对比试验 ,表明该洗涤膏在这两类应用场合中的洗涤效果良好     

猪细小病毒PCR检测方法的建立与应用

目的建立猪细小病毒(PPV)PCR检测方法。方法设计一对针对PPV的特异引物,经方阵滴定法确定PCR检测的最佳条件,以多种病毒DNA为模板进行PCR扩增,并对扩增产物进行斑点杂交鉴定。提取已知滴度的病毒培养物DNA为模板,稀释后进行PCR扩增,测定PCR方法的敏感性。采用此方法检测了180份猪各种组织样品的DNA及PPV-猪组织混合感染PK-15细胞模型。结果仅PPV野毒株和北京分离株AV7909能够扩增出一条531bp的片段,测序结果证明为PPV的特异片段。该方法所能检测的最小病毒滴度值为0.398TCID50,可以检测出PPV-猪组织混合感染PK-15细胞模型中0.500 TCID50的感染量。180份组织样品均未检出PPV。结论该方法具有良好的特异性和敏感性。     

颗粒活性炭的特性参数与吸附性能的关系试验

采用活性炭进行饮用水的深度处理,选择适合原水水质的活性炭至关重要,通过6种不同颗粒活性炭特性参数的测试,对饮用水有机物的吸附试验以及吸附等温线的测定,结果表明:针对颗粒活性炭的筛选,碘值,亚甲蓝值,吸附等温线的KF及斜率1/n值均不能单独作为评价筛选活性炭优劣的指标,而应综合考虑颗粒活性炭的孔径分布与原水中有机物的相对分子质量分布相匹配等。研究还表明:碘值,亚甲蓝值,吸附等温线的KF存在一定的相关性,从颗粒活性炭的特性参数和吸附性能参数可以推测活性炭滤柱试验吸附效果。颗粒活性炭用于饮用水深度处理,能去除水中相对分子质量小的有机物,处理的水量为颗粒活性炭体积的4800倍时,对CODMn的去除率为15%左右。     

End-capped polystyrene with 8-hydroxyquinoline group by ATRP method

8-Hydroxyqunioline end-capped polystyrene was prepared through atom transfer free radical polymerization (ATRP) with 8-(5-chloromethyl) quinolyl acetate as initiator. The results indicated that this polymerization is a first order reaction with respect to monomer conversion. The molecular weight increased linearly with monomer consumption and very narrow distribution of molecular weight was obtained (polydispersity index less than 1.2). The FT-IR and NMR results show that the 8-hydroxyquinloine group was chemically bonded to the polymer end and there is nearly one 8-hydroxyquinoline group in per polymer chain. All those data show that polymerization of styrene at such conditions displayed living characters. The polymer with 8-hydroxyqquinoline end group reacted with triethylaluminum to form polymeric light-emitting complex and single layer LED was prepared by common spin-coating method. The peak wavelength of LED based on synthesized polymeric complex was around 570 nm.     

测井储层沉积相分析

油田进入开发中后期后,储层研究工作尤为重要。沉积相控制储层的空间展布和储层的物性特征,充分利用测井资料研究沉积相是储层研究的重要手段。本文提出了测井储层沉积相分析方法:在地质分层的基础上,分析测井曲线特征,提取储层参数,进行单井沉积相划分,最后根据沉积学理论和油田具体地质背景编制沉积相带平面图。利用此方法对辽河油田更黄66井区进行了测井储层沉积相分析工作,作为最终成果的沉积相带平面图能够指导油田部署开发井。     

An improved ν-twin support vector machine

Twin support vector machine (TSVM) is regarded as a milestone in the development of the powerful SVM. It finds two nonparallel planes by resolving a pair of smaller-sized quadratic programming problems rather than a single large one, which makes the learning speed of TSVM approximately four times faster than that of the standard SVM. However, the empirical risk minimization principle is implemented in the TSVM, so it easily leads to the over-fitting problem and reduces the prediction accuracy of the classifier. ν-TSVM, as a variant of TSVM, also implements the empirical risk minimization principle. To enhance the generalization ability of the classifier, we propose an improved ν-TSVM by introducing a regularization term into the objective function, so there are two parts in the objective function, one of which is to maximize the margin between the two parallel hyper-planes, and the other one is to minimize the training errors of two classes of samples. Therefore the structural risk minimization principle is implemented in our improved ν-TSVM. Numerical experiments on one artificial dataset and nine benchmark datasets show that our improved ν-TSVM yields better generalization performance than SVM, ν-SVM, and ν-TSVM. Moreover, numerical experiments with different proportions of outliers demonstrate that our improved ν-TSVM is robust and stable. Finally, we apply our improved ν-TSVM to two BCI competition datasets, and also obtain better prediction accuracy.     

蓝色荧光碳点的制备及检测、防伪应用

以柠檬酸钠为碳源、氨水为氮源,采用一步水热法制备了氮掺杂碳点(NCDs),对其制备条件进行了优化.采用荧光光谱仪、TEM、AFM、XPS及FTIR对制备的NCDs进行了表征,并探索了NCDs在Fe3+检测及荧光防伪中的应用.结果表明,NCDs的最优制备条件为柠檬酸钠浓度为0.1 mol/L、氨水浓度为1.8 mol/L、反应温度为200℃、反应时间6 h、装载体积25 mL.在最优条件下制备的NCDs的荧光为典型的非激发波长依赖型,最佳激发波长为343 nm,最佳发射波长为443 nm,荧光量子产率可达54.9％.NCDs为球形结构,平均粒径为4.96 nm,碳核为类石墨烯结构且其表面含有—NH2、—OH及—COOH.NCDs的荧光可被Fe3+选择性猝灭,且荧光猝灭程度与Fe3+浓度在0.1～87.5μmol/L范围内线性关系良好,检测限为50 nmol/L.此外,将NCDs配制成荧光墨水,利用喷墨打印机打印出的图案整体饱满、边缘细节清晰具有很强的可识别性.