A Secure Distributed Authentication Scheme Based on CRT-VSS and Trusted Computing in MANET

With the rapid development of Mobile ad hoc network （MANET）, secure and practical authentica- tion is becoming increasingly important. There still ex- ist several unsolved problems. It may suffer from cheat- ing problems and Denial of services （DOS） attacks to- wards authentication service. Most existing schemes do not have satisfactory efficiency due to the exponential arithmetic complexity of Shamir＇s scheme. We explore the property of Verifiable secret sharing （VSS） schemes with Chinese remainder theorem （CRT）, then propose a se- cret key distributed storage scheme based on CRT-VSS and trusted computing techniques. We discuss the homo- morphism property of CRT-VSS and design a secure dis- tributed Elliptic curve-digital signature standard （ECC- DSS） authentication scheme. We provide formal guaran- tees towards the scheme proposed in this paper.     

Sink-oriented tree based data dissemination protocol for mobile sinks wireless sensor networks

Wireless Networks - Data dissemination toward static sinks causes the nearby nodes to deplete their energy quicker than the other nodes in the field (i.e., this is referred to as the hotspot...     

C8 BTBT薄膜结晶形貌及OTFT器件性能研究

以p型共轭有机小分子2,7二辛基[1]苯并噻吩并[3,2‐b]苯并噻吩(C8‐BTBT)作为底栅顶接触有机薄膜晶体管(OTFT)的有源层,采用浸渍提拉法、喷墨打印法和真空蒸镀法三种制备工艺,探究半导体薄膜载流子迁移率与结晶形貌的关系,发现不同工艺下有机小分子呈现出不同的生长行为和结晶情况,在很大程度上决定了OTFT器件性能的优劣;此外,通过XRD分析研究了退火处理对C8‐BTBT结晶的影响。结果表明,真空蒸镀制备的薄膜具有更高的结晶度、衬底覆盖率高,并且呈现出SK(Stranski‐Krastanov)模式的结晶生长特征,相应器件中陷阱密度最低,迁移率高达5.44 cm^2·V^-1·s^-1,开关比超过106;且退火处理会严重破坏C8‐BTBT薄膜的结晶。因此,控制半导体层的生长行为,提升半导体层的覆盖率和结晶度是制备高性能共轭小分子OTFT器件的有效途径。     

速度建模的影响因素与技术对策

叠前深度偏移速度建模是一种基于模型的迭代修正过程。影响速度模型精度的因素，除了速度反演算法之外，还包括复杂近地表条件下的静校正处理和观测系统的不规则性。从地震资料处理解释一体化的研究思路出发，针对不同的地震地质条件，提出了建立精确速度模型的对策。在地震勘探程度较高的地区，首先采用测井约束法建立初始宏观层速度模型，然后利用多域双重迭代法进行优化更新，以达到满足叠前成像精度要求的目的。另外，针对我国西部山地冲断带地区速度建模存在的问题，提出了速度建模的思路和对策，并对该项技术的发展趋势进行了展望。     

数据中心光网络资源分配方法与优化

数据中心采用光网络传输模式有利于提高系统的灵活性和拓展性,进而降低整体的能耗水平,但在实践中发现光网络资源存在分配不合理、应用效率较低等问题,不利于数据中心应对流量增加、宽带资源紧张等挑战。通过机器学习建立流量分类算法模型,并将其设计为流量分类器,使其融入光网络的流量传输环节,实现流量自动分类。借助遗传算法模型重构光网络的拓扑结构,从而优化传输路径。通过以上两项措施改进光网络的资源分配方式,并借助软件模拟检验算法模型的性能,结果显示经过以上算法处理的光网络缩短了传输路径的长度,提高了网络资源的利用率。     

针织面料维生素护肤整理

利用微胶囊技术将维生素C和维生素E制成维生素整理剂对针织物进行护肤整理。介绍了护肤整理剂微胶囊的制备,给出了维生素护肤整理工艺,制定了整理后织物上的维生素C棕榈酸酯含量的检测方法。     

双菌固态发酵处理餐厨垃圾

利用固态发酵的方法对城市餐厨垃圾进行处理,制造富含菌体蛋白的饲料。研究中采用多种酵母菌和霉菌混合发酵,筛选出了(白地霉F-1,米曲霉F—6)为优势菌种组合,并考察了发酵条件,最优化结果为:对发酵培养基高温灭菌20 min,加入(NH_4)_2SO_4 1％,KH_2PO_4 4％,NaCl3％,初始pH 5.5,含水率60％左右;种子液15％,接种比例为1:1,发酵5d。最终得到的饲料粗蛋白含量为33.87％,比原料增加了6.85％。     

Solubility and diffusivity of CO<Subscript>2</Subscript> in <Emphasis Type="Italic">n</Emphasis>-butanol + N235 system and absorption mechanism of CO<Subscript>2</Subscript> in a coupled reaction-extraction process

The absorption of CO₂ in insoluble organic amine is crucial for understanding the mechanism of coupled reaction-extraction-crystallization process between aqueous chloride and CO₂. In this study, the solubility and diffusivity of CO₂ in n-butanol + N235 system were measured and reported. The absorption of CO₂ in the system is a physical absorption behavior and the solubility of CO₂ decreases with the increase of the mass fraction of N235. The diffusivity of CO₂ increases firstly and then decreases with the increase in the mass fraction of N235. Moreover, the absorption mechanism of CO₂ in the coupled reaction-extraction-crystallization process was investigated and identified by experiments. The results indicated that in the coupled reaction-extraction-crystallization process, CO₂ is absorbed by the aqueous phase rather than by the organic phase and further transferred into the aqueous phase.

Open image in new window

     

反应工程方法在锂电池真空干燥模拟上的应用

锂离子电池注液之前的真空干燥,对于电芯的循环性能、安全性、稳定性有极其重要的影响。电芯结构设计、材料体系、烘箱尺寸等的不同会导致真空干燥过程存在差异。反应工程方法(REA)在常压、高初始水含量的对流干燥模拟预测上已有广泛应用,本研究将REA干燥理论应用于真空、低初始水含量的干燥过程仿真,发现与实验结果匹配良好。同时考虑了电芯气袋与烘箱环境湿度变化对干燥过程的影响,水含量预测偏差小于10%,利用单因子仿真实验所总结的规律能用于指导锂电池真空干燥工艺的改善。介绍了该模型在生产中的应用情况,也表明REA将在锂电池真空干燥预测上有很好的工业应用前景。     

Hot Corrosion Behaviors of Ni-14%Cr Alloys in Molten Sulfate

The corrosion behaviors and mechanism of Ni-14%Cr alloys in molten salt with Na2SO4 at 1000℃ was investigated by means of XRD analysis and SEM observation. Results show that the alloys were subjected to the accelerated corrosion in molten salt and the corrosion kinetic of the alloy obeys the parabolic law. On the other hand, the corrosion-resistance of the alloy could be improved significantly by increasing of chromium content. Corrosion products may be divided into three layers, i. e. NiCr2O4, CoCr2O4, CoN...