沼气脱硫技术研究

本文综述了近年研究人员在开发沼气脱硫工艺方面所做的工作,包括现代与传统的脱硫技术工艺.探讨了物理、化学和生物脱硫技术对沼气脱硫工艺的影响因素.     

我国职业教育法规中受教育者的权利主张

人本理念,是在对当代社会发展过程中人的主体地位和作用日益突出的反思中,提出的一种发展理念,是一种对人在社会发展中的主体作用与地位的肯定.教育科学中的人本理念,关键是要以学生为本,坚持"一切为了学生、为了一切学生、为了学生一切".     

NUMERICAL ANALYSIS OF THE EFFECTS OF LOCAL HYDRODYNAMICS ON MASS TRANSFER IN HETEROGENEOUS POROUS MEDIA

Many engineering problems require the estimation of mass transfer coefficients in porous materials. In heterogeneous materials or in cases where mass transfer sites are not spatially uniform, empirical equations for mass transfer coefficients vary widely, and the origin of these differences is not well understood. In this article, we use a stochastic algorithm to model mass transfer from single particles in a two-dimensional heterogeneous packed bed. The computed mass transfer coefficients are used to generate a distribution of local Peclet numbers in the bed. Detailed hydrodynamics are then used to interpret variations in the local Peclet number. The results show clear relationships between pore structure, streamline patterns, and mass transfer rates.     

硫酸/盐酸比例和Al~(3+)含量对铝箔隧道孔生长的影响

研究了硫酸/盐酸比例、温度和Al3+含量对高纯铝箔隧道孔生长的影响,发现随着硫酸浓度增加,温度对隧道孔极限长度和孔径的影响减小,在本文条件下隧道孔生长的临界温度最低可降低到35℃。在电解液中一定含量的Al3+可以避免铝箔表面形成大孔,从而改善隧道孔分布均匀性。     

Novel algorithms for shared segment protection

The major challenges in designing survivable schemes are how to allocate a minimal amount of spare resources (e.g., bandwidth) using fast (e.g., polynomial-time) algorithms, and, in case a failure occurs, to be able to recover quickly from it. All existing approaches invariably make tradeoffs. We propose novel shared segment protection algorithms which make little or no compromise . We develop an elegant integer linear programming (ILP) model to determine an optimal set of segments to protect a given active path. Although the ILP approach is useful for a medium-size network, it is too time consuming for large networks. Accordingly, we also design a fast heuristic algorithm based on dynamic programming to obtain a near-optimal set of segments. Although the heuristic algorithm has a polynomial time complexity, it can achieve a bandwidth efficiency as high as some best-performing shared path protection schemes and, at the same time, much faster recovery than these shared path protection schemes. The proposed scheme is also applicable to a wide range of networking technologies, including Internet Protocol and wavelength-division multiplexing networks under the generalized multiprotocol label switched framework.     

Achieving fast and bandwidth-efficient shared-path protection

Dynamic provisioning of restorable bandwidth guaranteed paths is a challenge in the design of broad-band transport networks, especially next-generation optical networks. A common approach is called (failure-independent) path protection, whereby for every mission-critical active path to be established, a link (or node) disjoint backup path (BP) is also established. To optimize network resource utilization, shared path protection should be adopted, which often allows a new BP to share the bandwidth allocated to some existing BPs. However, it usually leads the backup paths to use too many links, with zero cost in term of additional backup bandwidth, along its route. It will violate the restoration time guarantee. In this paper, we propose novel integer linear programming (ILP) formulations by introducing two parameters (/spl epsi/ and /spl mu/) in both the sharing with complete information (SCI) scheme and the distributed partial information management (DPIM) scheme. Our results show that the proposed ILP formulations can not only improve the network resource utilization effectively, but also keep the BPs as short as possible.     

Rheology in Processing of in Situ Composites of Polypropylene and Low Melting Poing Metals

The low melting point metallic tin powder or alloy of tin and lead was blended with polypropy-lene. A kind of in situ composite has been prepared. The variations of torque were studied when the composites were mixed in Haake torque rheogeniometer. By way of capillary extrusion, effects upon rheology of the in situ com-posites of the low melting point metals (LMPM) and coupling agent for their different variety and content, were investigated. From flow curves, the results indicate that in situ composites mixed with the LMPM are a kind of pseudoplastic fluid. If the LMPM were melted, the higher the content of the LMPM , the lower apparent viscosity of composites. Meanwhile, when the coupling agent is added into composites, the viscosity of composite will go up first and drop then. This shows that the LMPM have a promoter flow action on the polypropylene.     

4，4＇－二苯醚二甲酸改性PET的合成与表征

４，４＇－二苯醚二甲酸（ＯＢＢＡ）是一种重要的液晶聚合物单体。以此作为改性组分，合成了一系列ＰＥＴ共聚酯，并用１Ｈ－ＮＭＲ、ＦＴ－ＩＲ、ＧＰＣ、二甘醇和端羧基测定等方法进行了表征，同时对改性单体的转化率和合成共聚酯的反应速率进行了测定，结果表明，所选择的合成方法可以获得较高的转化率；反应速率则随ＯＢＢＡ的增加而增大。