Effects of Y and Ce on Microstructures and Properties of Nb-Si System Composites

The effects of yttrium and cerium on microstructures and properties of Nb-Si system composites were investigated by scanning electron microscopy( SEM), energy dispersive spectrum(EDS), X-ray diffraction(XRD) and high temperature oxidation experiments.It is found that the coarse primary silicide phase became finer and more homogeneous with Y and Ce addition.The results of high temperature oxidation experiments show that the oxidation rates of NbSi system composites with an appropriate amount of Y and Ce decrease compared with those of alloys without Y or Ce addition, and oxidation products mainly distribute along the phase boundaries between the Nb solid solution and silicide.     

分置式牛津型斯特林制冷机的数值分析与实验验证

对分置式牛津型斯特林制冷机进行了数值计算 ,介绍了计算模型考虑到的众多不可逆因素。通过对计算结果与实验结果的对比 ,验证了本文数值计算的准确性 ,说明本文计算模型与数值处理方法是切实可行的     

幅频特性的数学分析

根据数控装置检测系统中传感器信号电路工作要求,以共射电压放大电路为例,分别考虑耦合电容、旁路电容、结间电容和分布电容对不同信号频率的作用,分析了电路的低频特性和高频特性,给出了上下限截止频率的解析式.由此得出,电路其他参数一定时,在低频段,下限截止频率与耦合电容、旁路电容成反比,在高频段,上限截止频率与等效输入输出电容成反比,从而为传感器系统设计提供理论依据.     

Mapping rule-based systems onto multicomputers using simulated annealing

In this paper, we present a static load balancing method for mapping production rules in an expert system onto processors of a message-passing multicomputer. The method uses simulated annealing to achieve a nearly optimal allocation of production rules onto processor nodes. The approach balances the initial rule distribution to avoid higher communication demand among processor nodes at run time. A formal mapping model is developed and a new cost function is defined for the annealing process. New heuristic swap functions and cooling policies are provided to ensure the quality of the annealing process. A software load balancing package, SIMAL, was implemented on a SUN workstation to carry out the benchmark experiments. The overhead associated with this mapping method is O(m In m), where m is the number of rules in the production system. Two benchmark production systems, Toru-waltz and Tourney, are mapped onto a hypercube computer with 32 nodes. Experimental benchmark results verify the effectiveness of the rule mapping method. The method can be applied for distributed artificial intelligence processing or for the parallel execution of cooperating expert systems on a message-passing multicomputer.     

Stabilization Methods for Spectral Element Computations of Incompressible Flows

A stabilization method for the spectral element computation of incompressible flow problems is investigated. It is based on a filtering procedure which consists in filtering the velocity field by a spectral vanishing Helmholtz-type operator at each time step. Relationship between this filtering procedure and SVV-stabilization method, introduced recently in [JCP, 2004, 196(2), p680], is established. A number of numerical examples are presented to show the accuracy and stabilization capability of the method.     

Reduction of optical beat interference using gain-saturated RSOA in upstream WDM/SCM optical links

A new scheme for reducing optical beat interference (OBI) noise in optical network units is proposed for subcarrier multiplexing-based access network applications. The optical spectrum of the transmit lasers is broadened by using a radio frequency (RF) clipping tone with a modulation depth greater than one. This reduces the impact of the OBI noise. The distortions caused by an RF clipping tone are also suppressed by introducing a gain-saturated reflective optical amplifier, which shows the characteristics of high-pass filter. The proposed scheme has been verified by measuring the error vector magnitude of 16QAM signal with 20 Mbps. Error-free transmission has been achieved even when the light of OBI-noise-causing lasers is stronger than that of the signal laser by 7 dB     

油气井智能电子防盗阀门

为了有效扼制油田油井原油被盗的现象，减少因被盗及破坏带来的经济损失，研制出GMS3000油气井智能电子防盗阀门。该电子防盗阀门采用了新颖的防盗控制电路和精密的机械联动机构，通过计算机和管理软件得到相应的阀门授权控制，测量结果自动记录、控制阀门的编号和阀门的联动方式，并给予相应的显示。具有可靠、安全、便捷的特点。应用效果表明，达到了油井防盗、防破坏的目的，收到了良好的使用效果，为油田生产安全和提高经济效益提供了可靠的保障。     

Fixed point theorem-based iterative learning control for LTV systems with input singularity

In this paper, we address a challenging and open problem: how to design a suitable iterative learning control (ILC) system in the presence of input singularity, which is incurred by the singularities of the system direct feed-through term. Considering two typical types of input singularities, we first revise the ILC operators accordingly by adding a forgetting factor and incorporating a time-varying learning gain, in the sequel guarantee ILC operators to be contractible. Next, using the Banach fixed-point theorem, we demonstrate that the output sequence can either enter and remains ultimately in a designated neighborhood of the target trajectory, or is bounded by a class K function. Finally, an illustrative example is presented.     

压电量测系统漏电影响分析

本文通过对压电量测系统等效电路图的逐步简化,得出矩形脉冲信号的漏电方程;并对系统在各种情况下的时间常数,漏电相对误差进行了计算,最后就系统在校准和现场测试中经常碰到的几种情况,进行了定量估算,从而解决了压电量测系统在使用中的一些具体问题。     

Architecture and algorithms for tracking football players with multiple cameras

A system architecture and method for tracking people is presented for a sports application. The system input is video data from static cameras with overlapping fields-of-view at a football stadium. The output is the real-world, real-time positions of football players during a match. The system comprises two processing stages, operating on data from first a single camera and then multiple cameras. The organisation of processing is designed to achieve sufficient synchronisation between cameras, using a request-response pattern, invoked by the second stage multi-camera tracker. The single-view processing includes change detection against an adaptive background and image-plane tracking to improve the reliability of measurements of occluded players. The multiview process uses Kalman trackers to model the player position and velocity, to which the multiple measurements input from the single-view stage are associated. Results are demonstrated on real data.