Fluidised pellet bed bioreactor: a promising technology for onsite wastewater treatment and reuse.

A pilot-scale fluidised pellet bed (FPB) bioreactor, which combines chemical coagulation, biological degradation, particle pelletisation and separation in one unit, was applied for onsite wastewater treatment and reuse. As a result of rational use of inorganic coagulant and organic polymer and moderate mechanical agitation, spherical particles were generated in the upflow column and a well-fluidised bed was formed. With a continuous supply of dissolved oxygen through a recycling loop, an aerobic condition was kept in the bottom section of the FPB column. Under such conditions the pellets in the FPB column showed the following characteristics: (1) compact structure and high density; (2) rich in microorganisms; and (3) high MLSS and MLVSS concentrations. Therefore, the FPB bioreactor achieved more than 90% removal of SS, COD, BOD and TP from raw domestic wastewater within a total hydraulic retention time (HRT) of only about 30 minutes. It also showed nitrification and denitrification ability and the TN removal could be about 50% as the recycling ratio was increased to 1:1. The treated water quality is generally competitive with the secondary effluent from a conventional activated sludge process. With these advantages the FPB bioreactor is recommendable as a compact system for onsite wastewater treatment and reuse.     

FPGA-Based Decentralized Control of Arrayed MEMS for Microrobotic Application

In this paper, the authors have developed and implemented a decentralized decision-making strategy using field-programmable gate array (FPGA) technology as a prototype for an integrated controller of a microelectromechanical systems (MEMS) array for air-flow planar micromanipulation. The MEMS array was proposed to be integrated in a hybrid multichip module containing the FPGA-based controller. Algorithms and architectures, used for the decentralized control implementation and the hardware resource optimization, are described. A charge-coupled device camera was used to make each MEMS like an autonomous system when the distributed MEMS chip was tested. Finally, under air-flow condition, the FPGA-based decentralized control system successfully performed an object manipulation.     

The mixed state of superconducting networks

The equilibrium phase of a superconducting network has been investigated below the superconducting critical temperature in the framework of the Ginzburg-Landau theory. It is found that the properties of the mixed state are entirely governed by the flux quantization effect in the loops of the array. Quantitative predictions are made for the spatial configuration of the order parameter, the supercurrents pattern, and the equilibrium magnetization in an extended square network.     

Isolation of lactic whey proteins in the form of complexes with apple pectin

The possibility of isolating lactic whey proteins (LWP) in the form of insoluble complexes (IC) with apple pectin was studied. The effect of pH, ionic strength (mu, NaCl), temperature (T degree C), pectin weight fraction (X3%) and the total concentration of macromolecular components in the system (Ws) on isolation has been considered. The process has been characterized by LWP yield in the composition IC--P, percentage and the extent of protein concentration in the concentrated phase (IC)--F. The mixing of lactic whey with a pectin solution usually yielded an IC (10% less than or equal to X3 less than or equal to 90%). The dependence of P on X3 is of an extreme nature with a maximum of 85% at X3 = 60%. The following conditions correspond to the maximum LWP yield (90%) in the complex composition: pH 3.4, mu = 0.01, T = 5-20 degrees C, X3 = 60%, Ws = 0.5%. At compositions of the system corresponding to the maximum P value (X3 = 60%) practically all the LWP fractions are present in the concentrated phase. If X3 much greater than 60% or X3 much less than 60% alpha-lactalbumin is practically absent in the concentrated phase. Usually, minimum F values (2.5-4.0) correspond to maximum protein yield at X3 = 60%. At X3 greater than 70% and X3 less than 50% F values may be considerably higher (20 times and more). A decrease in the pectin methylation degree from 56.7% down to 15.4% does not affect F. The maximum protein yield (94%) occurs when low methylated pectin is used. The character of the dependence of F on X3 is explained according to similar processes of complex gel formation and the processes of gel formation in polymer solutions.     

Hybrid Link/Path-Based Design for Translucent Photonic Network Dimensioning

The advancement of ultralong-haul transmission technology has dramatically enhanced the all-optical reaches. However, the actual situations of installed fiber and sites for terrestrial network often prevent implementing a purely transparent network, and thus, opaque reshaping retiming regenerating (3R) regeneration is required to guarantee optical signal reachability. Since 3R regenerators based on optical/electrical/optical conversion tend to dominate the total network costs, an efficient network design method that allocates a minimum number of 3R regenerators to optimum locations is essential to build a cost-effective photonic network. In this paper, we propose such a network-dimensioning method by combining the advantages of link-based and path-based design approaches. It first guarantees optical signal reachability for any possible traffic demand in each segmented linear link. After combining all the links, excessive regenerators are eliminated based on the optical signal quality check with -factor calculation for each wavelength path. A trial design of a large-scale mesh network demonstrated a significant cost savings of more than 30% in comparison with a conventional link-based design. In the trial, the impact of fiber loss coefficient over the total network cost was investigated quantitatively, addressing the importance of such quantitative modeling and analysis.     

Spectral attenuation measurement for fluoride glass single-mode fibres by Fourier transform techniques

A new spectral attenuation measurement system using a Fourier transform spectrometer is developed. The Fourier transform spectral attenuation measurement (FT-SAM) system makes the signal acquisition time for a wide wave-length range of 1.0?4.2? much shorter than measurement with a conventional dispersive spectral attenuation measurement system. The spectral attenuation for a fluoride glass single-mode fibre, with a minimum loss of 3±1 dB/km at 2.5?m, is measured with this system.     

Growth temperature dependence of low-noise MESFET in molecular-beam epitaxy

The substrate growth temperature dependence of electrical properties for a low-noise MESFET fabricated on MBE-grown material has been demonstrated. The optimum noise figure and its associated gain were attributed to the higher epilayer quality and mobility at a growth temperature of 650°C between temperatures of 550°C and 700°C.