金红石与磷灰石浮选分离中硫酸铝的作用研究

研究表明．在FL108作捕收剂条件下，硫酸铝强烈抑制金红石而使磷灰石上浮，采用“FL108＋Al2（SO4）3”的浮选药剂制度，可实现两矿物的分离。通过分析Al3＋和金红石表面Ti4＋、磷灰石表面Ca2＋的水解特性，还阐述了Al2（SO4）3的选择抑制机理。     

UV photo‐stabilization of tetrabutyl titanate for aramid fibers via sol–gel surface modification

Tetrabutyl titanate was used as sol–gel precursor of a nanosized TiO₂ coating to improve the photo‐stability of aramid fibers. The nanosized TiO₂ coating was characterized by XRD and XPS. The influence of the TiO₂ coating on photo‐stability of aramid fibers was investigated by an accelerated photo‐ageing method. The photo‐stability of aramid fiber showed obvious improvement after coating. After 156 h of UV exposure, the coated fibers showed less deterioration in mechanical properties with the retained tensile strength and elongation at break greater than 36 and 50% of the original values, respectively, whereas the uncoated fibers degraded completely and became powdery. SEM analysis showed no significant surface morphological change on the coated fiber after the exposure, while some latitudinal crack fractures appeared on the uncoated aramid fiber. The effect of the nanosized TiO₂ coating was also well demonstrated by examining the difference of distributions of C1s in XPS deconvolution analysis on the surface of uncoated/coated fibers with increasing UV exposure time. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3113–3119, 2007     

A Rough RBF Neural Network Based on Weighted Regularized Extreme Learning Machine

Adjusting parameters iteratively is a traditional way of training neural networks, and the Rough RBF Neural Networks (R-RBF-NN) follows the same idea. However, this idea has many disadvantages, for instance, the training accuracy and generalization accuracy etc. So how to change this condition is a hot topic in Academics. On the basis of Extreme Learning Machine (ELM), this paper proposes a Weighted Regularized Extreme Learning Machine (WRELM), taking into account both minimizing structured risk and weighted least-squares principle, to train R-RBF-NN. The traditional iterative training method is replaced by the minimal norm least-squares solution of general linear system. The method proposed in this paper, increasing controllability of the entire learning process and considering the structured risk and empirical risk, can improve the performance of learning and generalization. Experiments show that it can reach a very superior performance in both time and accuracy when WRELM trains the Rough RBF Neural Networks in pattern classification and function regression, especially in pattern classification, which can improve the generalization accuracy more than 3.36 % compared with ELM. Obviously, the performance of the method proposed in this paper is better than the traditional methods.     

Image super-resolution based on multi-space sparse representation

Sparse representation provides a new method of generating a super-resolution image from a single low resolution input image. An over-complete base for sparse representation is an essential part of such methods. However, discovering the over-complete base with efficient representation from a large amount of image patches is a difficult problem. In this paper, we propose a super-resolution construction based on multi-space sparse representation to efficiently solve the problem. In the representation, image patches are decomposed into a structure component and a texture component represented by the over-complete bases of their own spaces so that their high-level features can be captured by the bases. In the implementation, a prior knowledge about low resolution images generation is combined to the typical base construction for high construction quality. Experiment results demonstrate that the proposed method significantly improves the PSNR, SSIM and visual quality of reconstructed high-resolution image.     

Prediction-based realistic 3D model compression

The benefit of using the geometry image to represent an arbitrary 3D mesh is that the 3D mesh can be re-sampled as a completely regular structure and coded efficiently by common image compression methods. For geometry image-based 3D mesh compression, we need to code the normal-map images while coding geometry images to improve the subjective quality and realistic effects of the reconstructed model. In traditional methods, a geometry image and a normal-map image are coded independently. However a strong correlation exists between these two kinds of images, because both of them are generated from the same 3D mesh and share the same parameterization. In this paper we propose a predictive coding framework, in which the normal-map image is predicted based on the geometric correlation between them. Additionally we utilize the strong geometric correlation among three components of normal-map image to improve the predicting accuracy. The experimental results show the proposed coding framework improves the coding efficiency of normal-map image, meanwhile the realistic effect of a 3D mesh is significantly enhanced.     

新型尿素产品的开发

介绍了国内外新型尿素产品（大颗粒尿素、涂层尿素、包膜尿素、长效尿素）的生产工艺和产品特点。     

空客飞机编码译码组件DEU B故障分析与系统优化

针对机龄较长的A320飞机多次重复出现DEU B或DEU B 300 RH等故障信息,难以排除故障,本文将研究空客排故手册TSM和图解目录手册IPC中的排故信息,以及编码译码计算机软件和硬件的情况,判断故障的原因,彻底解决这一故障,提高航空器的可靠性,控制维修成本。最终,在大量研究之后,发现是编码译码计算机在互换性和混装性方面出了问题,并经过系统设备优化升级、手册修改等措施,取得了预期的效果。     

非接触CPU卡在环保排污上的应用

为确保环保排污重要数据交互、存储的安全性以及后台系统与前端总量计量设备数据传输的安全性,本文结合现有的排污许可证制度,提出了将国密SM1加密算法非接触CPU卡作为信息载体在环保排污上的应用模式,并对目前在浙江省环保领域应用的具体案例进行了剖析.     

Morphology of epoxy resin modified with silyl‐crosslinked urethane elastomer

Silyl‐crosslinked urethane elastomer modifying epoxy resin has drawn much interest. Here the triethoxysilyl‐terminated polycaprolactone elastomer (PCL‐TESi) modifying diglycidylether of bisphenol A epoxy resins (DGEBA) system was chosen, and then the effect of the type of curing agent on the phase structure of the studied epoxy resin system was investigated. The modified systems were obtained with different phase structures by varying the formulations of the curing agent. It was experimentally shown that with the addition of aminosilane (KBE‐9103), the crosslinked density was greatly increased. The cured system also showed from SEM and TEM analysis that addition of KBE‐9103 increased the compatibility between the PCL‐TESi and DGEBA, which made the ductility of the system decrease, but also indicated from TEM that addition of much KBE‐9103 made the reacted silicone particles coagulate each other. The state of phase separation from TEM in the cured system was theoretically explained. These would serve the deeper studies of the mechanism of silyl‐crosslinked urethane elastomer modifying epoxy resin in the future. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 611–619, 2005     

工业变换炉最佳催化剂粒度

本文在建立数学模型的基础上，用计算机模拟变换炉的操作工况，考察改变催化剂粒度对经济效益的影响，从而得到工业变换炉催化剂颗粒最佳尺寸，开发了以经济效益为考察依据，工业反应器中催化剂颗粒最佳尺寸的计算方法。